DOWNLOAD Harman Kardon HK 3250 (serv.man4) Service Manual ↓ Size: 355.04 KB | Pages: 14 in PDF or view online for FREE

Select the channel number of the
desired preset station with the UP or
DOWN TUNE/PRESET or NUMERIC
buttons on the remote control unit.

1 Press the PRESET SCAN button

on the remote control unit to listen
to the preset stations.

2 The receiver will start scanning the

stations in the preset sequence
and each station is received for 4
seconds.

3 At the desired station, press again

to stop scanning.

NOTES:
• If the end of the frequency range is

reached during the auto or manual
tuning, tuning will continue from the
opposite end.

• When FM stereo broadcasts are

poor, select the FM mono mode
with the SEEK/STEREO button so
that the AUTO indicator goes out.

• When memorizing a new station,

the previously memorized station
on the same channel number is
cleared.

• In the event of a power failure or

when the receiver is disconnected
from the AC outlet, the memorized
stations are maintained for
approximately 2 weeks.

1 Select the program source to be

recorded with the INPUT
FUNCTION SELECTOR buttons.

2 Start recording on the cassette

deck.

3 Play back the desired program

source.
• The volume, balance, bass and

treble settings have no effect on
the recording or dubbing.

• When recording is performed on

a 3-head cassette deck, the
recorded sound can be monitored
through the speakers by pressing
the TAPE MONITOR button to
ON.

8

ENGLISH

HK3250 engelsk  11/01/98 14:28  Side 8

ENGLISH

The infrared beam is emitted forward
from this window when you press any
button on the commander. For the
remote controls to function properly,
always face this window toward the
remote sensor window on the receiver
and do not obstruct this window with
any material.

Press this button to turn the power on
and off.
Automatic power on: When you press
the input function buttons (CD,
TUNER, TAPE, TV/AUX, VCR 1, 
VCR 2) in STANDBY mode, the power
is automatically turned on and the
function is selected.

Press these buttons to tune the
receiver up or down.

Button for scanning preset station
frequencies.

These buttons can be used for preset
tuning in TUNER mode.
Preset tuning: Select one of 30
preset locations.

For a CD PLAYER: DISC (DISC
SELECTOR is available for the
Harman Kardon FL8400, FL8450 CD
changer), PLAY, PAUSE, STOP,
BACKWARD SKIP, FORWARD SKIP,
A-B and INTRO buttons are available.
When selecting a disc, press the
DISC button.

Press the button to select the desired
input function. The available buttons
are CD, TUNER, TAPE MON, 
TV / AUX, VCR 1, and VCR 2.

For a cassette deck:
PAUSE/RECORD, STOP, REVERSE
PLAY, FORWARD PLAY, REWIND,
FAST FORWARD buttons are
available.

Press to adjust volume levels.

Press once and the display dims,
press again and it turns off. Press a
third time and it goes on.

Set the receiver to automatically turn
off after 10, 20, 30, 60, or 90 minutes.
Each time the button is pressed, the
setting is advanced as below.

The display will dim when the sleep
function has been set.

Press this button to silence the
speakers temporarily. The volume
indicator blinks. Press again to restore
the same listening level as before.

This battery case is provided as the
power source for the commander. To
remove the cover, press it down with
your thumb and pull it toward the back
side. Two UM-3, size “AA” or R6 1.5V
dry batteries are used. When loading
the batteries, make sure that the
polarity is correct. Remove the
batteries from the case if the remote
commander will not be used for a long
time.

10min

20min

30min

60min

90min

OFF

9

HK3250 engelsk  11/01/98 14:28  Side 9

1

4

5

6

11

9

2

3

8

10

12

CD

Tape Mon

TV/Aux

VCR 1

VCR 2

Cass Deck

Skip

Intro

Search

Tuner

A-B

Select

Display

Sleep

Mute

Volume

Standby

Tuning

PScan

Tuner

CD

1

2

3

4

5

6

7

8

9

0

13

7

/ ON

A/B

Disc

harman  kardon

10

ENGLISH

/ kardon

PRESET

MEMORY

MS

MIN

DELAY

TIME

SLEEP

Headphones

Speakers

1

2

Tape Mon

VCR1

VCR 2

FM

CD

TV/Aux

AM

Bass

Treble

Balance

Volume

REMOTE CONTROL
OPERATION RANGE

8m

30

30

CD

Tape Mon

TV/Aux

VCR 1

VCR 2

Cass Deck

Skip

Intro

Search

Tuner

A-B

Select

Display

Sleep

Mute

Volume

Standby

Tuning

PScan

Tuner

CD

1

2

3

4

5

6

7

8

9

0

/ ON

A/B

Disc

harman  kardon

HK3250 engelsk  11/01/98 14:28  Side 10

11

ENGLISH

This unit is designed for trouble-free operation. Most problems users encounter are due to operating errors. So, if you have a problem, first check this list for a possible
solution. If the problem persists, consult your authorized Harman Kardon Service Center.

No lights illuminate when POWER button is pressed

Unit is plugged into a live outlet

No sound is heard

Correct input function selector button has been pressed
Volume is turned up
Speakers are connected properly

No output from one or more channels

Cables are not defective: Check/replace speaker cables
The signal source is operating and providing proper signal output to the HK3250

Tuner sound has a large amount of interference, or

The antenna is properly connected

The “Stereo” display is not illuminated, or

The antenna is properly located

Tuner sound distorts and/or volume level is too low

The antenna is set in the proper direction
The antenna is adequate to receive the desired station

Tuner is intermittent or continuously buzzing or hissing

The unit is away from fluorescent lights, TVs, motors and other electrical 
appliances

Stations cannot be preset

After pressing the MEMORY button, the PRESET button is pressed while the 
MEMORY indicator blinks, and the memory button is pressed again.

HK3250 engelsk  11/01/98 14:28  Side 11