DOWNLOAD Harman Kardon HK 3250 (serv.man4) Service Manual ↓ Size: 355.04 KB | Pages: 14 in PDF or view online for FREE

Model
HK 3250 (serv.man4)
Pages
14
Size
355.04 KB
Type
PDF
Document
User Manual / Operation Manual
Brand
Device
Audio
File
hk-3250-sm4.pdf
Date

Harman Kardon HK 3250 (serv.man4) User Manual / Operation Manual ▷ View online

BASIC OPERATION
1 Press the POWER button to turn
the power ON, the display panel
will then light up.
• When using the POWER button
on the remote control turn the unit
off, the unit will go into STANDBY
mode. 
2 Select the desired program source
with the INPUT FUNCTION
SELECTOR buttons and the
selected input function appears in
the display.
3 When the TAPE MONITOR button
is set to ON so that the TAPE
indicator lights up, the selected
program source cannot be heard
from the speakers.
To listen to a program source
other than cassette deck be sure
to set the TAPE MONITOR button
to OFF.
4 Adjust the volume to a comfortable
listening level with the VOLUME
control or VOLUME UP/DOWN
buttons on the remote control.
5 For private listening, insert a 1/4
inch plug of the headphone into the
HEADPHONE jack.
• When the headphones are
plugged, sound from the
speakers is cut off.
LISTENING TO BROADCASTS
You can use auto, manual or preset
tuning to select a radio station.
AUTO TUNING
If broadcast signals are strong and
there is no interference, auto tuning is
possible.
1 Press the FM or AM button to
select the desired band.
2 Press the SEEK STEREO button
and AUTO will illuminate in the
display.
3 Press the TUNE UP/DOWN button.
Tuning will start automatically and
stop at a broadcast station
frequency with sufficient signal
strength.
MANUAL TUNING
Auto tuning may be impossible if the
broadcast signal is weak. If so, use
manual tuning.
1 Press the FM or AM button to
select the desired band.
2 Press the SEEK/STEREO button
and AUTO will go out in the display.
3 Press the UP or DOWN
TUNE/PRESET button until the
desired station frequency is
reached.
• Each time the button is pressed,
the frequency changes by a step.
• When the button is kept pressed,
the frequency changes
continuously in sequence.
PRESET TUNING
The receiver has a memory for up to
30 preset stations.
If the station frequencies are stored in
this memory, they can be tuned in by
a simplified procedure.
MANUAL PRESETTING
Up to 30 stations can be preset at
random, regardless of the reception
band.
1 Tune in the station to be
memorized using the auto or
manual tuning.
2 Press the MEMORY button, then
the MEMORY indicator lights up for
5 seconds.
3 Select the channel number with the
UP or DOWN TUNE/PRESET
NUMERIC buttons on the remote
while the MEMORY indicator is lit,
then the selected channel number
lights up.
4 Press the MEMORY button to
memorize the station.
• When using the NUMERIC
buttons on the remote, the station
is memorized without pressing
the MEMORY button again.
• When selecting one digit channel
number with the NUMERIC
buttons, press the corresponding
number without “0”.
5 Repeat steps 1 to 4 to preset other
stations.
7
Operation
ENGLISH
HK3250 engelsk  11/01/98 14:28  Side 7
RECALLING THE PRESET
STATIONS
Select the channel number of the
desired preset station with the UP or
DOWN TUNE/PRESET or NUMERIC
buttons on the remote control unit.
SCANNING THE PRESET
STATIONS IN SEQUENCE
1 Press the PRESET SCAN button
on the remote control unit to listen
to the preset stations.
2 The receiver will start scanning the
stations in the preset sequence
and each station is received for 4
seconds.
3 At the desired station, press again
to stop scanning.
NOTES:
• If the end of the frequency range is
reached during the auto or manual
tuning, tuning will continue from the
opposite end.
• When FM stereo broadcasts are
poor, select the FM mono mode
with the SEEK/STEREO button so
that the AUTO indicator goes out.
• When memorizing a new station,
the previously memorized station
on the same channel number is
cleared.
• In the event of a power failure or
when the receiver is disconnected
from the AC outlet, the memorized
stations are maintained for
approximately 2 weeks.
RECORDING WITH A
CASSETTE DECK
1 Select the program source to be
recorded with the INPUT
FUNCTION SELECTOR buttons.
2 Start recording on the cassette
deck.
3 Play back the desired program
source.
• The volume, balance, bass and
treble settings have no effect on
the recording or dubbing.
• When recording is performed on
a 3-head cassette deck, the
recorded sound can be monitored
through the speakers by pressing
the TAPE MONITOR button to
ON.
8
ENGLISH
HK3250 engelsk  11/01/98 14:28  Side 8
ENGLISH
1. INFRARED TRANSMITTER
WINDOW
The infrared beam is emitted forward
from this window when you press any
button on the commander. For the
remote controls to function properly,
always face this window toward the
remote sensor window on the receiver
and do not obstruct this window with
any material.
2. STANDBY BUTTON
Press this button to turn the power on
and off.
Automatic power on: When you press
the input function buttons (CD,
TUNER, TAPE, TV/AUX, VCR 1, 
VCR 2) in STANDBY mode, the power
is automatically turned on and the
function is selected.
3. TUNING UP/DOWN
Press these buttons to tune the
receiver up or down.
4. PRESET SCAN BUTTON
Button for scanning preset station
frequencies.
5. NUMERIC BUTTONS
These buttons can be used for preset
tuning in TUNER mode.
Preset tuning: Select one of 30
preset locations.
6. CD FUNCTION BUTTONS
For a CD PLAYER: DISC (DISC
SELECTOR is available for the
Harman Kardon FL8400, FL8450 CD
changer), PLAY, PAUSE, STOP,
BACKWARD SKIP, FORWARD SKIP,
A-B and INTRO buttons are available.
When selecting a disc, press the
DISC button.
7. INPUT FUNCTION
SELECTOR
Press the button to select the desired
input function. The available buttons
are CD, TUNER, TAPE MON, 
TV / AUX, VCR 1, and VCR 2.
8. CASSETTE DECK
FUNCTION BUTTONS
For a cassette deck:
PAUSE/RECORD, STOP, REVERSE
PLAY, FORWARD PLAY, REWIND,
FAST FORWARD buttons are
available.
9. VOLUME BUTTONS
Press to adjust volume levels.
10. DISPLAY BUTTON
Press once and the display dims,
press again and it turns off. Press a
third time and it goes on.
11. SLEEP BUTTON
Set the receiver to automatically turn
off after 10, 20, 30, 60, or 90 minutes.
Each time the button is pressed, the
setting is advanced as below.
The display will dim when the sleep
function has been set.
12. MUTE BUTTON
Press this button to silence the
speakers temporarily. The volume
indicator blinks. Press again to restore
the same listening level as before.
13. BATTERY COMPARTMENT
This battery case is provided as the
power source for the commander. To
remove the cover, press it down with
your thumb and pull it toward the back
side. Two UM-3, size “AA” or R6 1.5V
dry batteries are used. When loading
the batteries, make sure that the
polarity is correct. Remove the
batteries from the case if the remote
commander will not be used for a long
time.
HK3250 System Remote Control
10min
20min
30min
60min
90min
OFF
9
HK3250 engelsk  11/01/98 14:28  Side 9
1
4
5
6
11
9
2
3
8
10
12
CD
Tape Mon
TV/Aux
VCR 1
VCR 2
Cass Deck
Skip
Intro
Search
Tuner
A-B
Select
Display
Sleep
Mute
Volume
Standby
Tuning
PScan
Tuner
CD
1
2
3
4
5
6
7
8
9
0
13
7
/ ON
A/B
Disc
harman  kardon
10
ENGLISH
HK 3250
harman 
kardon
PRESET
MEMORY
MS
MIN
DELAY
TIME
SLEEP
Power
Headphones
Speakers
1
2
Tape Mon
VCR1
VCR 2
FM
CD
TV/Aux
AM
Bass
Treble
Balance
Tune/Preset
Tune/Preset
Memory
Seek Stereo
Volume
REMOTE CONTROL
OPERATION RANGE
8m
30
30
CD
Tape Mon
TV/Aux
VCR 1
VCR 2
Cass Deck
Skip
Intro
Search
Tuner
A-B
Select
Display
Sleep
Mute
Volume
Standby
Tuning
PScan
Tuner
CD
1
2
3
4
5
6
7
8
9
0
/ ON
A/B
Disc
harman  kardon
HK3250 engelsk  11/01/98 14:28  Side 10
Page of 14
Display

Click on the first or last page to see other HK 3250 (serv.man4) service manuals if exist.