Harman Kardon HD 970 (serv.man12) User Manual / Operation Manual ▷ View online
HD 970 CD Player
OWNER’S MANUAL
HD 970
Play
Display
SKip/Search
Stop
Pause
Power for the Digital Revolution
®
2 TABLE OF CONTENS
Table of Contents
2 Typographic Conventions
3 Introduction
4 Information
4 Unpacking
5 Front Panel Controls
6 Rear Panel Connections
7 Remote Control Functions
9 Installation
3 Introduction
4 Information
4 Unpacking
5 Front Panel Controls
6 Rear Panel Connections
7 Remote Control Functions
9 Installation
10 Operation
10
10
Loading and Unloading Discs
10
Normal Play
11
Display Dim
11
Time Display
11
Disc Info
12
Search
12
Skip
12
Folder
12
+10/-10
12
Input/Source Selection
13 Programmed Play Operation
13
13
Programmed Play
13
Checking Program Contents
13
Clearing Programs
14
Repeat Play
15 Troubleshooting Guide
16 Technical Specifications
16 Technical Specifications
Typographic Conventions
In order to help you use this manual with the remote control, front panel controls and rear panel
connections, certain conventions have been used.
connections, certain conventions have been used.
EXAMPLE – (bold type) indicates a specific remote control or front panel button, or rear panel
connection jack.
connection jack.
EXAMPLE
– (bold type) indicates a message in the front panel information display.
1 – (number in a square) indicates a specific front panel control.
a – (number in an oval) indicates a button or indicator on the remote.
¡ – (number in a circle) indicates a rear panel connection.
Declaration of Conformity
We, Harman Consumer Group International
2, route de Tours
72500 Château-du-Loir,
FRANCE
72500 Château-du-Loir,
FRANCE
declare in own responsibility, that the product described
in this owner’s manual is in compliance with technical
standards:
in this owner’s manual is in compliance with technical
standards:
EN 55013:2001+A1:2003
EN 55020:2002+A1:2003
EN 61000-3-2:2000
EN 61000-3-3.1995+A1:2001
EN 60065:2002
Jurjen Amsterdam
Harman Consumer Group International
01/05
INTRODUCTION 3
Introduction
Thank you for choosing Harman Kardon
HD 970 CD player.
The HD 970 is an exceptionally well-engineered
product that offers high performance and ease
of use.
HD 970 CD player.
The HD 970 is an exceptionally well-engineered
product that offers high performance and ease
of use.
Along with conventional CD audio discs, the
HD 970 is also compatible with MP3 data from
CDs and most recordable CD formats.
HD 970 is also compatible with MP3 data from
CDs and most recordable CD formats.
We ask that you take a few minutes to read
through this Owner’s Manual to familiarize your-
self with the controls and functions. This brief
investment of time will yield dividends in the
form of years of listening pleasure.
through this Owner’s Manual to familiarize your-
self with the controls and functions. This brief
investment of time will yield dividends in the
form of years of listening pleasure.
If you have any questions about this product, its
installation or operation, please contact your
dealer, as they are your best source of local
information.
installation or operation, please contact your
dealer, as they are your best source of local
information.
Description and Features
Ever since its introduction in 1992,
Harman Kardon RLS (Real-time Linear
Smoothing) conversion technology has been
hailed as an efficient, high performance means
of transforming the, at that time 16-bit, digital
signal from CD to high quality analog. The short
RLS signal path resulted in hitherto unknown
clarity and detail, in combination with awesome
dynamic resolution of the critical bass frequen-
cies.
Harman Kardon RLS (Real-time Linear
Smoothing) conversion technology has been
hailed as an efficient, high performance means
of transforming the, at that time 16-bit, digital
signal from CD to high quality analog. The short
RLS signal path resulted in hitherto unknown
clarity and detail, in combination with awesome
dynamic resolution of the critical bass frequen-
cies.
RLS-II was a natural, yet radical evolution of the
original RLS concept.
original RLS concept.
Since then, dramatic progress has been made in
Digital Signal Processing, allowing the integra-
tion of DSP's in a standalone CD Player and the
implementation of a very powerful algorithm in
the digital domain: the birth of the RLS-III.
Digital Signal Processing, allowing the integra-
tion of DSP's in a standalone CD Player and the
implementation of a very powerful algorithm in
the digital domain: the birth of the RLS-III.
Using theoretical roots of the RLS, RLS-III has set
new standards for dynamic range and shifted
noise to an absolute non-audible frequency
range with very high jitter rejection. The result is
an astonishing common signal format of 24 bits
at a sampling frequency of 384 kHz.
This 24 bits/384 kHz signal format allows
Harman Kardon engineers to take a minimalist
approach to the subsequent analog filtering,
without paying any penalty in the form of the
aliasing errors and artifacts.
new standards for dynamic range and shifted
noise to an absolute non-audible frequency
range with very high jitter rejection. The result is
an astonishing common signal format of 24 bits
at a sampling frequency of 384 kHz.
This 24 bits/384 kHz signal format allows
Harman Kardon engineers to take a minimalist
approach to the subsequent analog filtering,
without paying any penalty in the form of the
aliasing errors and artifacts.
Harman Kardon's analog processing legacy has
been expressed to its optimal level in the output
stage of the HD 970 with High Definition, Wide
Bandwidth and Low Feedback circuitry in a pure
Class A configuration, using only high grade
components.
been expressed to its optimal level in the output
stage of the HD 970 with High Definition, Wide
Bandwidth and Low Feedback circuitry in a pure
Class A configuration, using only high grade
components.
A unique feature of the HD 970 is that it allows
other source components to be played back
using the high-grade audiophile digital-to-ana-
log convertors inside the CD player. Especially
source components using older and less power-
ful convertors will benefit from this feature.
other source components to be played back
using the high-grade audiophile digital-to-ana-
log convertors inside the CD player. Especially
source components using older and less power-
ful convertors will benefit from this feature.
Important Note: The player will only output
2-channel PCM signals. Neither multi-channel
Dolby Digital or DTS nor their 2-channel down-
mix signals will be output.
2-channel PCM signals. Neither multi-channel
Dolby Digital or DTS nor their 2-channel down-
mix signals will be output.
■ Asynchronous Digital Processing for
Highest Possible Jitter Rejection based
on a 32bit DSP
on a 32bit DSP
■ Real-time Linear Smoothing III
■ Two Digital Inputs (One Optical and
One Coaxial) for Dramatic Sound
Quality Improvement of External
Devices
Quality Improvement of External
Devices
■ CD Playback with CD Text Functionality,
MP3 Playback with ID3 Tag Information
■ Digital Output for Direct Connection to
Outboard Digital-to-Analog Converters
■ Sophisticated Programming Features to
Automatically Play Tracks in
Preprogrammed or Random Order
Preprogrammed or Random Order
■
Full compatibility with CD-R and CD-RW
format to play (finalized) recordable
and erasable discs without problems.
format to play (finalized) recordable
and erasable discs without problems.
CLASS 1
LASER
4 INFORMATION
Information
Important Safety Information
Verify Line Voltage Before Use
Your HD 970 has been designed for use with
230-volt AC current. Connection to a line voltage
other than that for which it is intended can create
a safety and fire hazard, and may damage the
unit.
Your HD 970 has been designed for use with
230-volt AC current. Connection to a line voltage
other than that for which it is intended can create
a safety and fire hazard, and may damage the
unit.
If you have any questions about the voltage
requirements for your specific model, or about
the line voltage in your area, contact your selling
dealer before plugging the unit into a wall out-
let.
requirements for your specific model, or about
the line voltage in your area, contact your selling
dealer before plugging the unit into a wall out-
let.
Do Not Use Extension Cords
We do not recommend that extension cords be
used with this product. As with all electrical
devices, do not run power cords under rugs or
carpets or place heavy objects on them.
Damaged power cords should be replaced
immediately by an authorized service depot with
cords meeting factory specifications.
We do not recommend that extension cords be
used with this product. As with all electrical
devices, do not run power cords under rugs or
carpets or place heavy objects on them.
Damaged power cords should be replaced
immediately by an authorized service depot with
cords meeting factory specifications.
Handle The AC Power Cord Gently
When disconnecting the power cord from an AC
outlet always pull the plug, never pull the cord.
If you do not intend to use the unit for any con-
siderable length of time, disconnect the plug
from the AC outlet.
When disconnecting the power cord from an AC
outlet always pull the plug, never pull the cord.
If you do not intend to use the unit for any con-
siderable length of time, disconnect the plug
from the AC outlet.
Do Not Open The Cabinet
There are no user-serviceable components inside
this product. Opening the cabinet may present a
shock hazard, and any modification to the prod-
uct will void your guarantee. If water or any
metal object such as a paper clip, wire or a
staple accidentally falls inside the unit, discon-
nect it from the AC power source immediately,
and consult an authorized service station.
There are no user-serviceable components inside
this product. Opening the cabinet may present a
shock hazard, and any modification to the prod-
uct will void your guarantee. If water or any
metal object such as a paper clip, wire or a
staple accidentally falls inside the unit, discon-
nect it from the AC power source immediately,
and consult an authorized service station.
CAUTION: The HD 970 uses a laser system. To
prevent direct exposure to the laser beam, do
not open the cabinet enclosure or defeat any of
the safety mechanisms provided for your protec-
tion. DO NOT STARE INTO THE LASER BEAM. To
ensure proper use of this product, please read
this owner’s manual carefully and retain it for
future use. Should the unit require maintenance
or repair, please contact your local
Harman Kardon service station. Refer servicing
to qualified personnel only.
prevent direct exposure to the laser beam, do
not open the cabinet enclosure or defeat any of
the safety mechanisms provided for your protec-
tion. DO NOT STARE INTO THE LASER BEAM. To
ensure proper use of this product, please read
this owner’s manual carefully and retain it for
future use. Should the unit require maintenance
or repair, please contact your local
Harman Kardon service station. Refer servicing
to qualified personnel only.
Installation Location
■
To assure proper operation, and to avoid the
potential for safety hazards, place the unit on
a firm and level surface. When placing the unit
on a shelf, be certain that the shelf and any
mounting hardware can support the weight of
the product.
potential for safety hazards, place the unit on
a firm and level surface. When placing the unit
on a shelf, be certain that the shelf and any
mounting hardware can support the weight of
the product.
■
Make certain that proper space is provided
both above and below the unit for ventilation.
If this product will be installed in a cabinet or
other enclosed area, make certain that there is
sufficient air movement within the cabinet.
both above and below the unit for ventilation.
If this product will be installed in a cabinet or
other enclosed area, make certain that there is
sufficient air movement within the cabinet.
■
Do not place the unit directly on a carpeted
surface.
surface.
■
Avoid installation in extremely hot or cold
locations, or an area that is exposed to direct
sunlight or heating equipment.
locations, or an area that is exposed to direct
sunlight or heating equipment.
■
Avoid moist or humid locations.
Cleaning
When the unit gets dirty, wipe it with a clean,
soft dry cloth. If necessary, wipe it with a soft
cloth dampened with mild soapy water, then a
fresh cloth with clean water. Wipe dry immedi-
ately with a dry cloth. NEVER use benzene, thin-
ner, alcohol or any other volatile cleaning agent.
Do not use abrasive cleaners, as they may dam-
age the finish of metal parts. Avoid spraying
insecticide near the unit.
When the unit gets dirty, wipe it with a clean,
soft dry cloth. If necessary, wipe it with a soft
cloth dampened with mild soapy water, then a
fresh cloth with clean water. Wipe dry immedi-
ately with a dry cloth. NEVER use benzene, thin-
ner, alcohol or any other volatile cleaning agent.
Do not use abrasive cleaners, as they may dam-
age the finish of metal parts. Avoid spraying
insecticide near the unit.
Moving The Unit
Before moving the unit, be certain to disconnect
any interconnection cords with other compo-
nents, and make certain that you disconnect the
unit from the AC outlet.
Before moving the unit, be certain to disconnect
any interconnection cords with other compo-
nents, and make certain that you disconnect the
unit from the AC outlet.
Unpacking
The carton and shipping materials used to pro-
tect your new HD 970 during shipment were
specially designed to cushion it from shock and
vibration. We suggest that you save the carton
and packing materials for use in shipping if you
move or should the unit ever need repair.
tect your new HD 970 during shipment were
specially designed to cushion it from shock and
vibration. We suggest that you save the carton
and packing materials for use in shipping if you
move or should the unit ever need repair.
To minimize the size of the carton in storage,
you may wish to flatten it. This is done by care-
fully slitting the tape seams on the bottom and
collapsing the carton down to a more two-
dimensional appearance. Other cardboard
inserts may be stored in the same manner.
Packing materials that cannot be collapsed
should be saved along with the carton in a
plastic bag.
you may wish to flatten it. This is done by care-
fully slitting the tape seams on the bottom and
collapsing the carton down to a more two-
dimensional appearance. Other cardboard
inserts may be stored in the same manner.
Packing materials that cannot be collapsed
should be saved along with the carton in a
plastic bag.
If you do not wish to save the packaging
materials, please note that the carton and other
sections of the shipping protection are
recyclable. Please respect the environment and
discard those materials at a local recycling
center.
materials, please note that the carton and other
sections of the shipping protection are
recyclable. Please respect the environment and
discard those materials at a local recycling
center.
