DOWNLOAD Harman Kardon GO AND PLAY II (serv.man4) Service Manual ↓ Size: 3.64 MB | Pages: 22 in PDF or view online for FREE

2

3

Please read the following precautions before use:

This equipment has been tested and found to comply with 
the limits for aClass B digital device, pursuant to part 15 
of the FCC Rules. These limits are designed to provide 
reasonable protection against harmful interference in a 
residential installation. This equipment generates, uses 
and can radiateradio frequency energy and, if not installed 
and used in accordance with the instructions, may cause 
harmful interference to radio communications. However, 
there is no guarantee that interference will not occur in a 
particular installation. If this equipment does cause harmful 
interference to radio or television reception, which can be 
determined by turning the equipment off and on, the user 
is encouraged to try to correct the interference by one or 
more of the following measures:

Reorient or relocate the receiving antenna.

 

–

Increase the separation between the equipment and 

 

–

receiver.

Connect the equipment into an outlet on a circuit 

 

–

different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV 

 

–

technician for help. 

MODIFICATIONS NOT EXPRESSLY APPROVED BY THE 
MANUFACTURER COULD VOID THE USER AUTHORITY TO 
OPERATE THE EQUIPMENT UNDER FCC RULES.

This Class B digital apparatus complies with Canadian 
ICES-003.

Cet appareil numérique de la classe B est conforme à la 
norme NMB-003 du Canada

 1. Read these instructions.
 2. Keep these instructions.
 3. Heed all warnings.
 4. Follow all instructions.
 5. Do not use this apparatus near water.
 6. Clean only with a dry cloth.
 7.  Do not block any ventilation openings. Install in 

accordance with the manufacturer’s instructions.

8.  Do not install near any heat sources such as radiators, 

heat registers, stoves or other apparatus (including 
amplifiers) that produce heat.

 9.  Do not defeat the safety purpose of the polarized or 

grounding-type plug. A polarized plug has two blades 
with one wider than the other. A grounding-type plug 
has two blades and a third grounding prong. The wide 
blade or the third prong is provided for your safety. If 
the provided plug does not fit into your outlet, consult 
an electrician for replacement of the obsolete outlet.

 10.  Protect the power cord from being walked on or 

pinched, particularly at plugs, convenience receptacles 
and the point where they exit from the apparatus.

 11.  Only use attachments/accessories specified by the 

manufacturer.

12.  Use only with the cart, stand, tripod, bracket or 

table specified by the manufacturer or sold with the 
apparatus. When a cart is used, use caution when 
moving the cart/apparatus combination to avoid injury 
from tip-over.

13.  Unplug this apparatus during lightning storms or when 

unused for long periods of time.

14.  Refer all servicing to qualified service personnel. 

Servicing is required when the apparatus has been 
damaged in any way, such as power supply cord or 
plug is damaged, liquid has been spilled or objects 
have fallen into the apparatus, the apparatus has been 
exposed to rain or moisture, does not operate normally, 
or has been dropped.

15.  Do not expose this apparatus to dripping or splashing 

and ensure that no objects filled with liquids, such as 
vases, are placed on the apparatus.

16.  To completely disconnect this apparatus from the  

AC Mains, disconnect the power supply cord plug from 
the AC receptacle.

17.  The mains plug of the power supply cord shall remain 

readily operable.

18.  Do not expose batteries to excessive heat such as 

sunshine, fire or the like.

SEE MARKING ON BACK OF PRODUCT.

 

 

WARNING: TO REDUCE THE RISK OF FIRE 

OR ELECTRIC SHOCK, DO NOT EXPOSE THIS 

APPARATUS TO RAIN OR MOISTURE.

THE LIGHTNING FLASH WITH AN ARROWHEAD SYMBOL, WITHIN AN 

EQUILATERAL TRIANGLE, IS INTENDED TO ALERT THE USER TO THE 

PRESENCE OF UNINSULATED “DANGEROUS VOLTAGE” WITHIN THE 

PRODUCT’S ENCLOSURE THAT MAYBE OF SUFFICIENT MAGNITUDE TO 

CONSTITUTEA RISK OF ELECTRIC SHOCK TO PERSONS.

RISK OF ELECTRIC SHOCK  

DO NOT OPEN

THE EXCLAMATION POINT WITHIN AN EQUILA-TERAL TRIANGLE IS 

INTENDED TO ALERT THE USERTO THE PRESENCE OF IMPORTANT 

OPERATING AND MAINTENANCE (SERVICING) INSTRUCTIONS IN THE 

LITERATURE ACCOMPANYING THE PRODUCT.

0170CSK - HK Go+Play II v5.indd   2

01/12/09   11:36:44

2

3

™ 

Harman Kardon Go + Play II 

Power supply 

Note: Included power cables  

will vary depending on region.

iPhone and iPod touch 

adapter kit

Smart Remote

Nest for iPhone and iPod touch

Thank you for purchasing the Harman Kardon Go + Play

™

 II portable hi-fi speaker for iPhone/

iPod. This system has been designed to meet the highest audio-performance standards. The 
Harman Kardon Go + Play II system will meet all your listening and travel needs, allowing you to 
immerse yourself in your favorite music, wherever you are. 

The Harman Kardon Go + Play II portable, high-fidelity docking system for iPhone/iPod performs 
like a home-theater system. With a groundbreaking design that’s built for comfort, performance 
and freedom, the Harman Kardon Go + Play II unit will cradle your iPhone/iPod and surround it 
with luxurious Harman Kardon

®

 sound. Carry the unit by its stainless-steel arch handle to enjoy 

the ultimate portable soundstage. Connected to your iPhone/iPod, MP3 player or other music 
source, the system will provide clean, powerful sound while also charging your iPhone/iPod. 
The RF Smart Remote provides complete control of your music experience. Enjoy the pinnacle 
of portable audio performance with the Harman Kardon Go + Play II system – it will kick your 
listening experience into the future.

IEQ – Intelligent equalization technology utilizes the Harman Kardon Go + Play II processor and 
digital signal processing (DSP) to optimize the system’s output, based on battery or power-supply 
operation. 

Bi-amplification – The Harman Kardon Go + Play II unit utilizes two amplifiers to allow for 
clean, powerful sound output. 

RF remote – Allows for control of the Harman Kardon Go + Play II system from up to nine 
meters (29 feet) away.

Carefully unpack your Harman Kardon Go + Play II system and identify all components:

English

0170CSK - HK Go+Play II v5.indd   3

01/12/09   11:36:44

4

5

Unpack the 

1. 

Harman Kardon Go + Play II system.

Place the appropriate nest into the docking station.

2. 

IMPORTANT: Turn the adjustable knob in the center of the docking station to match your 

3. 

specific iPhone/iPod model.
Place the 

4. 

iPhone/iPod into the docking station.

Connect the power supply into the 

5. 

“DC In jack”.

Plug the adapter into the wall outlet.

6. 

If using batteries is preferred, install eight (8) type D batteries into the bottom of the unit

7. 

. 

Smart Remote 

storage 

compartment

DC In

USB

S-Video

Auxiliary In

The Harman Kardon Go + Play II system is equipped with a storage compartment on the back of 
the unit. Simply press the compartment to open it and store your remote.

 Unscrew the two battery compartment cover screws counterclockwise to the unlocked 

1. 

position; remove the battery compartment cover.
 Place eight (8) fresh C-cell batteries as shown.

2. 

Replace the battery compartment cover. 

3. 

Note: System will not use battery power when using AC power.

1.

2.

3.

DO NOT MIX BATTERY TYPES. 

DO NOT MIX CHARGED AND PARTIALLY CHARGED BATTERIES. 

BATTERIES WILL NOT RECHARGE WHILE IN THE UNIT

Alkaline batteries are considered nonhazardous. Rechargeable batteries (i.e., nickel cadmium, 
nickel metal-hydride, lithium and lithium-ion) are considered hazardous household materials and 
may pose an unnecessary health and safety risk. 

In the European Union and other locations, it is illegal to dispose of any battery with household 
trash. All batteries must be disposed of in an environmentally sound manner. Contact your local 
waste management officials for information regarding the environmentally sound collection, 
recycling and disposal of used batteries.

0170CSK - HK Go+Play II v5.indd   4

01/12/09   11:36:45

4

5

Press the 

1. 

“Power” button located on top of the Harman Kardon Go + Play II system to turn on 

the unit.
Select and play music using the controls on your 

2. 

iPhone/iPod or send commands to your 

iPhone/iPod with the Harman Kardon Smart Remote. (Remote-control functionality may vary 
depending on iPod model and firmware version).
Adjust volume using the “+” and “–” volume buttons located on top of the unit or on the 

3. 

Harman Kardon Smart Remote. 

Connect the auxiliary device into the 

1. 

“Auxiliary” In jack using the 3.5mm auxiliary cable 

(not included).
Press the 

2. 

“Power” button located on top of the Harman Kardon Go + Play II system to turn on 

the unit.
Control music playback through your 

3. 

auxiliary device.

Adjust volume using the “+” and “–” volume buttons located on top of the unit or on the 

4. 

Harman Kardon Smart Remote. 

Make sure your iPhone/iPod is securely docked in the Harman Kardon Go + Play II unit, using 

1. 

the correct adapters.
Make sure the Harman Kardon Go + Play 

2. 

II unit is connected to a live electrical outlet.  

Note: The Harman Kardon Go + Play II system will not charge other devices. 

The Harman Kardon Go + Play II system features a USB synchronization and charge port. This 
feature allows synchronization of the Go + Play II system, with an iPhone/iPod docked, to iTunes 
and provides a charge to the iPhone/iPod even when the Harman Kardon Go + Play II is only 
under battery power.

Connect the Harman Kardon Go + Play II USB port to a computer using a USB cable 

1. 

(not included).
Dock an iPhone/iPod into the Harman Kardon Go + Play II.

2. 

iTunes will synchronize with the iPhone/iPod.

3. 

The remote control will work only with compatible iPhone/iPod models. Before proceeding, make 
sure that the iPhone/iPod is securely docked to your Harman Kardon product. The Music Control 
Mode is indicated by a blue light, and the iPod Navigation Mode is indicated by an orange light.

Music Control Mode
To turn the iPod on:

Press any button on the remote control to wake up the iPod.

To turn the iPod off:

Press and hold the “Play/Pause” button for two seconds.

To turn the unit on:

Press and hold the volume button.

To turn the unit off:

Press and hold the “Play/Pause” button.

To play a track:

Press the “Play/Pause” button.

(Note: If the iPod is at the main menu, pressing the “Play/
Pause” button will cause the iPod to start playing all of 
its music.)

To pause a track:

Press the “Play/Pause” button while a song is playing.

To skip to the next track:

Press the “Forward” button.

To skip to the previous track:

Press the “Reverse” button.

To fast advance a track:

Press and hold the “Forward” button.

To fast reverse a track:

Press and hold the “Reverse” button.

To increase volume:

Press the “Volume Up” button.

To decrease volume:

Press the “Volume Down” button.

To mute:

Press the “Volume Up” and “Volume Down” buttons at the same time.

To change to the  
iPod Navigation Mode:

Press the “Mode” button.

iPod Mode
To turn the iPod on:

Press any button on the remote control to wake up the iPod.

To turn the iPod off:

Press and hold the “Play/Pause” button for two seconds.

To turn the unit on:

Press and hold the volume button.

To turn the unit off:

Press and hold the “Play/Pause” button.

To scroll the iPod cursor up:

Press the “Reverse” button.

To scroll the iPod cursor down: Press the “Forward” button.
To go to the previous menu:

Press the “Volume Down” button.

To select Menu/Track/Feature: Press the “Volume Up” button.
To change to the 
iPod Navigation Mode:

Press the “Mode” button.

English

0170CSK - HK Go+Play II v5.indd   5

01/12/09   11:36:45