Harman Kardon GLA 55 Service Manual ▷ View online
48
850-0075-002
PAD, FOAM, PORON, 18 (D) X 1 (T)
1
EA
50
850-0348-001
PAD, GAP FILLER, HEATSKINK, 11MMX11MMX1MM THICK
2
EA
51
850-0350-001
PAD, BEZEL,
1
EA
52
850-0351-001
PAD, ADHESIVE, TWEETER COVER,
1
EA
53
850-0352-001
GASKET, COVER BASE,
1
EA
54
850-0353-001
SPACER, CABLE SUPPORT, CLEAR SILICONE, 3 HOLES, RIGHT
2
EA
55
850-0357-001
GASKET, CMMD TWEETER,
1
EA
56
850-0367-001
RUBBER SEAL, SCREW BOSS,
10
EA
57
850-0394-001
PAD
1
EA
58
930-0066-001
INSULATION FILM, PCBA, GLA-55
1
EA
59
850-0377-001
RUBBER SEAL, GASKET, BTWN HOUSING LEFT,RIGHT,HOUSING
1
EA
GLA-55
harman/kardon
8
GLA-55
harman/kardon
9
GLA-55 PARTS LIST (LEFT, PASSIVE) LOUDSPEAKER
Item #
Part Number
Description
Qty
1
100-0092-001
HOUSING, LEFT SIDE,
1
EA
2
100-0093-001
HOUSING, RIGHT SIDE,
1
EA
3
120-0089-001
BAFFLE, LEFT, HK GLA-55
1
EA
4
060-0308-001
ASY, PORT,
1
EA
5
050-0168-003B WOOFER, HERCULES ALUMINUM, 4 OHM, COSMETIC,
1
EA
6
050-0132-003B TWEETER, CMMD LITE, 4 OHM, COSMETIC,
1
EA
7
250-0140-001
BASE, ENCLOSURE, LEFT, ZINC,
1
EA
8
250-0153-001
COVER, BASE ENCLOSURE, LEFT,
1
EA
10
190-0376-001
TRIM, TWEETER,
1
EA
11
190-0528-001
COVER, HERCULES,
1
EA
12
250-0143-001
COVER, CMMD TWEETER, ZINC,
1
EA
14
250-0145-001
BEZEL, HERCULES, LEFT, ZINC,
1
EA
16
500-0357-001
ASY, CABLE, TWEETER, PLUS, LEFT, CHROME,
1
EA
17
500-0358-001
ASY, CABLE, TWEETER, MINUS, LEFT, CHROME,
1
EA
18
500-0359-001
ASY, CABLE, HERCULES, TOP/LEFT, CHROME,
1
EA
19
500-0360-001
ASY, CABLE, HERCULES, BOTTOM LEFT, CHROME,
1
EA
20
830-0030-001
WASHER, RUBBER, 1.2MMTHICK
2
EA
25
180-0068-001
FOOT, SIDE, 2.0MM THICK, PMS COOL GRAY 11,
2
EA
26
180-0069-001
FOOT, FRONT, 1.5MM THICK, COLOR: PMS COOL GRAY 11,
1
EA
27
180-0070-001
FOOT, REAR, 2.0MM THICK, COLOR: PMS COOL GRAY 11,
1
EA
28
190-0529-001
LIGHT PIPE, LEFT SPEAKER,
1
EA
29
190-0532-001
GROMMET, CABLE ISOLATION, 2HOLES, LEFT SPEAKER,
2
EA
30
190-0554-001
SEAL, PORT TO BAFFLE,
1
EA
31
500-0369-001
ASY, CABLE, INPUT, LEFT, SATELLITE, CLEAR PVC W/METAL BRAID,
1
EA
32
190-0558-001
SEAL, RUBBER PAD, BAFFLE TO HOUSING,
1
EA
33
400-0264-001
PCBA, LEFT SATELLITE,
1
EA
34
800-0048-001
SCREW, MACHINE, M3 X 10MM, PAN HEAD PHILLIPS, ZINC
4
EA
35
800-0048-009
SCREW, MACHINE, M3 X 5MM, PAN HEAD PHILLIPS, ZINC
3
EA
36
800-0149-001
SCREW, FLAT HEAD, SELF TAPPING, BRIGHT ZINC PLATE, 4MMX12MM
4
EA
37
800-0150-001
SCREW, MACHINE, M2.5 X 7.,5MM, FLAT HEAD, PHILLIPS DRIVE, ZINC
3
EA
38
800-0151-003
SCREW, MACHINE, M2.5 X 4.0 MM LONG, SOCKET HEAD CAP, STEEL, BRIGHT
NICKEL PLATE
NICKEL PLATE
2
EA
39
800-0152-003
SCREW, LG PAN HEAD, SELF TAPPING, BRIGHT ZINC PLATE, TORX
DRIVE,TWO START, 3MM DIA. X 8MM LONG
DRIVE,TWO START, 3MM DIA. X 8MM LONG
1
EA
40
800-0155-003
SCREW, MACHINE, M4 X 7MM, CAP HEAD SPANNER, STEEL, BRIGHT CHROME
PLATE
PLATE
4
EA
41
800-0156-001
SCREW, MACHINE, M3X6MM LONG, PAN HEAD, PHILLIPS, SPRING LOCK
WASHER, ZINC
WASHER, ZINC
10
EA
42
820-0016-001
BOLT, MACHINE, M4 X 10.00 INTERNAL THREAD, CAP HEAD SPANNER, STEEL,
BRIGHT CHROME PLATE
BRIGHT CHROME PLATE
1
EA
43
820-0016-002
BOLT, MACHINE, M4 X 22.70 INTERNAL THREAD, CAP HEAD SPANNER, STEEL,
BRIGHT CHROME PLATE
BRIGHT CHROME PLATE
1
EA
44
820-0016-003
BOLT, MACHINE, M4 X 21.00 INTERNAL THREAD, CAP HEAD SPANNER, STEEL,
BRIGHT CHROME PLATE
BRIGHT CHROME PLATE
1
EA
45
820-0016-004
BOLT, MACHINE, M4 X 20.30 INTERNAL THREAD, CAP HEAD SPANNER, STEEL,
BRIGHT CHROME PLATE
BRIGHT CHROME PLATE
1
EA
46
820-0016-005
BOLT, MACHINE, M4 X 7.00 INTERNAL THREAD, CAP HEAD SPANNER, STEEL,
BRIGHT CHROME PLATE
BRIGHT CHROME PLATE
1
EA
48
850-0075-002
PAD, FOAM, PORON, 18 (D) X 1 (T)
1
EA
51
850-0350-001
PAD, BEZEL,
1
EA
52
850-0351-001
PAD, ADHESIVE, TWEETER COVER,
1
EA
53
850-0352-001
GASKET, COVER BASE,
1
EA
54
850-0354-001
SPACER, CABLE SUPPORT, CLEAR SILICONE, 2 HOLES, LEFT
2
EA
55
850-0357-001
GASKET, CMMD TWEETER,
1
EA
56
850-0367-001
RUBBER SEAL, SCREW BOSS,
10
EA
59
850-0377-001
RUBBER SEAL, GASKET, BTWN HOUSING LEFT,RIGHT,HOUSING
1
EA
GLA-55
harman/kardon
10
GLA-55 disassembly
Tools needed:
• (2) #8 spanner screwdrivers or #8 spanner bits
• Soldering/desoldering tools
• Phillips
screwdriver
• Torx (size T10) screwdriver or T10 bit
• Exacto
knife
• Optional: One half section of the packing foam
IMPORTANT NOTE:
There a number of pads, gaskets, adhesive, and surfaces with double-sided tape on this
product. Attention must be paid to these areas when the GLA-55 is disassembled. If these
materials are damaged, removed, or disturbed, they must be replaced in their original location,
or the air integrity of the product will be compromised and fidelity may suffer.
I Replacing the Silver-Braided Connecting Cord On The GLA-55 Slave speaker
• Follow steps 1-5 in the procedure below “GLA-55 disassembly Slave speaker (w/ cord)”
II GLA-55 disassembly Left, Slave speaker (w/ cord)
1) Support the loudspeaker with one half section of the packing foam with the base facing upwards.
Alternately, if the packing foam is not available, the speaker must be supported so the base faces
upwards in a clamp so it can be worked on easily, taking care to pad the clamp so the enclosure will not
be scratched.
2) Peel off the four rubber pads on the base cover.
3) Remove the (4) Phillips screws that are now exposed
4) Remove the base cover from the loudspeaker and slide the cord grommet out of the notch
5) Unplug the six pin Molex connector from the small circuit board and set the cord aside.
6) Remove the (3) Torx size T10 screws from the small circuit board
7) There are (4) connections that need to be desoldered (they appear as blobs of solder). Desolder and
remove all excess solder with braided wick or a desoldering tool.
8) Remove the small circuit board; detach and watch for the small, loose “light pipe” that you do not lose it.
9) Remove the (10) Torx size T10 or Phillips screws holding the silver main base on.
10) Remove the single Torx size T10 or Phillips screw (for port tube)
GLA-55
harman/kardon
11
Click on the first or last page to see other GLA 55 service manuals if exist.