Harman Kardon FL 8380 (serv.man10) Service Manual ▷ View online
FL8380
AC Power Cord: Connect this plug to an AC
outlet. If the outlet is switch controlled, make cer-
tain that the switch is in the ON position.
outlet. If the outlet is switch controlled, make cer-
tain that the switch is in the ON position.
Coaxial-Digital Output: Connect this
jack to the coaxial-digital input of a digital
audio/video receiver or an external digital-to-
analog converter for direct access to the digital
signals of the FL 8380. DO NOT connect this jack
to the standard audio inputs of any device.
jack to the coaxial-digital input of a digital
audio/video receiver or an external digital-to-
analog converter for direct access to the digital
signals of the FL 8380. DO NOT connect this jack
to the standard audio inputs of any device.
Remote Control Output: Connect this
jack to the input of another compatible Harman
Kardon remote controlled device to have the
remote sensor on the FL 8380 provide signals to
other products.
jack to the input of another compatible Harman
Kardon remote controlled device to have the
remote sensor on the FL 8380 provide signals to
other products.
Remote Control Input: Connect the out-
put of a remote infrared sensor or the remote
control output of another compatible Harman
Kardon product. This will enable the remote con-
trol system to operate even when the front panel
Remote Sensor
put of a remote infrared sensor or the remote
control output of another compatible Harman
Kardon product. This will enable the remote con-
trol system to operate even when the front panel
Remote Sensor
D is blocked. It will also allow
use of the FL 8380 with optional, external control
systems.
systems.
Analog Audio Outputs: Connect these
jacks to the analog CD audio inputs of your
receiver, surround processor or preamplifier.
jacks to the analog CD audio inputs of your
receiver, surround processor or preamplifier.
Rear Panel Connections
AC Power Cord
Coaxial Digital Output
Remote Control Output
Coaxial Digital Output
Remote Control Output
Remote Control Input
Analog Audio Outputs
Analog Audio Outputs
DIGITAL
OUTPUT
AUDIO
OUTPUT
LEFT
RIGHT
REMOTE
IN
OUT
SERIAL NO.
AC INPUT
AC 117V / 60Hz
20W
MODEL NO.: FL 8380
HARMAN KARDON
NORTHRIDGE
CALIFORNIA, U.S.A.
HARMAN KARDON
NORTHRIDGE
CALIFORNIA, U.S.A.
MADE IN CHINA
PRODUCT COMPLIES WITH DHHS
RULES 21 CFR SUBCHAPTER J.
APPLICABLE AT DATE MANUFACTURED:
(YCL).
RULES 21 CFR SUBCHAPTER J.
APPLICABLE AT DATE MANUFACTURED:
(YCL).
SHOCK HAZARD: DO NOT OPEN
WARNING: TO REDUCE THE RISK OF FIRE OR
ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE
TO RAIN OR MOISTURE.
ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE
TO RAIN OR MOISTURE.
This device complies with part 1.5 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference,
and, (2) this device must accept any interference
received, including interference that may cause
undesired operation.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference,
and, (2) this device must accept any interference
received, including interference that may cause
undesired operation.
AVIS: RISQUE DE CHOC ELECTRIQUE - NE PAS OUVRIR
CA U T I O N
CA U T I O N
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CLASS 1 LASER PRODUCT
LR46800
CAN/CSA-C22.2 No. 1-98
UL 1270
®
1 2
3 4 5
5
FL8380
Remote Control Functions
FL 8380
SKIP
SEARCH
RANDOM
PROGRAM
TIME
INTRO
REPEAT
+
–
DISC NO.
0
4
5
6
3
2
1
3
4
5
2
1
7
8
9
CLEAR
TRACK NO.
b
c
a
d
e
f
g
h
i
j
k
l
m
n
n
n
n
n
n
n
o
n
n
n
n
n
n
DISC
SKIP
SKIP
POWER
OFF
ON
p
0 Disc-Select: Press one of these buttons to
select the disc in a specific position in the CD
drawer.
select the disc in a specific position in the CD
drawer.
1 Numeric Buttons: Press these buttons to
select a specific track on a disc. The FL 8380 will
immediately go to the track and begin to play it.
These buttons are also used to enter track num-
bers into the memory for preprogrammed-play
lists. (See page 13 for complete information on
programming the FL 8380.)
select a specific track on a disc. The FL 8380 will
immediately go to the track and begin to play it.
These buttons are also used to enter track num-
bers into the memory for preprogrammed-play
lists. (See page 13 for complete information on
programming the FL 8380.)
2 Clear: Press this button to remove tracks
from a programmed sequence. Each press of the
button will remove one track, starting with the
last track programmed to play. (See page 13 for
complete information on programming the
FL 8380.)
from a programmed sequence. Each press of the
button will remove one track, starting with the
last track programmed to play. (See page 13 for
complete information on programming the
FL 8380.)
3 Search: Press these buttons to search for-
ward — or backwards ‚ through a disc to
locate a particular portion of the selection being
played.
ward — or backwards ‚ through a disc to
locate a particular portion of the selection being
played.
4 Skip: Press one of these buttons to move to
the next track fl· or to move back to the previ-
ous track ‡fi on the disc being played.
the next track fl· or to move back to the previ-
ous track ‡fi on the disc being played.
5 Stop: Press this button to stop the disc cur-
rently being played.
rently being played.
6 Play: Press this button to start the play-
back of a CD. If the CD drawer is open, pressing
this button will automatically close the drawer.
back of a CD. If the CD drawer is open, pressing
this button will automatically close the drawer.
7 Random: Press this button to play all
tracks on one or more CD’s in random order.
(See page 11 for more information.)
tracks on one or more CD’s in random order.
(See page 11 for more information.)
8 Pause: Press this button once to momen-
tarily pause a disc. When the button is pressed
again, the disc will resume play from the point
at which it was paused.
tarily pause a disc. When the button is pressed
again, the disc will resume play from the point
at which it was paused.
9 Program: This button is used to program
the playback of discs and tracks in a particular
order. (See page 13 for complete instructions on
programming the FL 8380.)
the playback of discs and tracks in a particular
order. (See page 13 for complete instructions on
programming the FL 8380.)
A Time: In normal operation, the display will
show the running time of the track being played.
Press the button once to check the time remain-
ing for the track in play. Press the button again
to view the total play time remaining for the disc
in play.
show the running time of the track being played.
Press the button once to check the time remain-
ing for the track in play. Press the button again
to view the total play time remaining for the disc
in play.
B Intro: Press this button to put the FL 8380
into the Intro Scan mode. When you press this
button, the unit will play the first 10 seconds of
each track on the disc, and then move to the
next track. Press the button again to defeat the
function and continue full play of the current
track. (See page 12 for more information.)
into the Intro Scan mode. When you press this
button, the unit will play the first 10 seconds of
each track on the disc, and then move to the
next track. Press the button again to defeat the
function and continue full play of the current
track. (See page 12 for more information.)
C Repeat: Press this button once to continu-
ously repeat the track currently being played.
Press it a second time to repeat the entire disc
and a third time to repeat all discs. (See page 13
for more information).
ously repeat the track currently being played.
Press it a second time to repeat the entire disc
and a third time to repeat all discs. (See page 13
for more information).
D Disc-Skip: Press these buttons to change
to the next or former disc. If a disc position is
empty, the FL 8380 will automatically search for
the next position that contains a disc unless the
disc drawer is open.
to the next or former disc. If a disc position is
empty, the FL 8380 will automatically search for
the next position that contains a disc unless the
disc drawer is open.
E Power On Button: When the FL 8380 is
plugged into an active AC outlet, press this button
to turn the unit on. The Status Mode Indicator
1 will turn green. If the unit is plugged into a
switched outlet, power must be applied to the
switched outlet in order for the Power On button
E to be effective.
F Power Off Button: Press this button to
turn the unit off; the Status Mode Indicator
plugged into an active AC outlet, press this button
to turn the unit on. The Status Mode Indicator
1 will turn green. If the unit is plugged into a
switched outlet, power must be applied to the
switched outlet in order for the Power On button
E to be effective.
F Power Off Button: Press this button to
turn the unit off; the Status Mode Indicator
1
will turn amber, indicating that the unit is in a
Standby mode.
Standby mode.
6
FL8380 Preliminary Production Specification
GENERAL INFORMATION
1. Power Consumption
Operating
<
18W; Standby <5W
2. Power Super
230V AC 50Hz or 120V AC60Hz
3. Dimensions
440 x 130 x 386mm
4. Product Outlook
Refer to attached diagram
5. Remote Unit
harman/kardon remote code
6. Compliance Requirement
i EMC EN55013, EN61000-3-2,
EN61000-3-3, EN55022
ii. CE (LVD EN60065)
iii. NRTL/C
iv. HDCD
7. Disc Changer Mechanism
5 disc carousel; Play 1 change 4
8. Sound Processor
HDCD
9. CD Servo System
Digital Servo, Auto Alignment
AUDIO SPECIFICATION
Typical
Limit
Output Level 1KHz 0dB (no HDCD)
1.0 Vrms
+-1dB
Output Level 1KHz 0dB (HDCD output)
2.0Vrms
+- 2dB
Frequency Response 20Hz~20KHz reference
+0-1dB
+0.5-1.5dB
THD 1KHz 0dB (30KHz Filter)
0.01%
0.05%
THD 1KHz 0dB (no any filter)
0.03%
0.08%
THD 20Hz~20KHz 0dB (30KHz Filter)
0.04%
0.05%
S/N 1KHz 0dB A-weighted (A Filter)
97dB
93dB
Dynamic Range
95dB
90dB
Channel Separation 1KHz 0dB(30KHz Filter)
85dB
80dB
Channel Balance
+-0.5dB
+-1.5dB
De-emphasis (5KHz,16KHz)
+-0.5dB
+-1.5dB
Headphone output specification under 32 ohm load
Maximum Headphone Output Level 1KHz 0dB
1.5Vp-p
+-0.2V
Frequency Response (20~20KHz)
+-1dB
+-1.5dB
THD 20~20KHz 0dB (30KHz Filter)
0.1%
0.2%
FL8380
7
FL8380 Preliminary Production Specification
Test Disc Specification
Typical
Limit
Black Dot TCD 725B
1000um
600um
Interruption MCD-131
900um
600um
Finger print
75um
65um
Vertical Deviation MCD-151
0.92mm
0.92mm
Eccentricity TCD 712
140um
140um
8cm test disc TCD 783
Last Track
Last Track
Access Time 1
st
to last track YEDS18
4 sec
10 sec
FL8380
8
Click on the first or last page to see other FL 8380 (serv.man10) service manuals if exist.