FESTIVAL 60 (serv.man8) — Harman Kardon Audio User Guide / Operation Manual

Model
FESTIVAL 60 (serv.man8)
Pages
22
Size
562.75 KB
Type
PDF
Document
User Guide / Operation Manual
Brand
Device
Audio
File
festival-60-sm8.pdf
Date

View Harman Kardon FESTIVAL 60 (serv.man8) User Guide / Operation Manual online

80
60
festival
®
Owner’s Guide
Guide du propriétaire
Guía del propietario
For more information and your nearest 
Harman Kardon dealer please call 800-422-8027.
Harman Kardon
250 Crossways Park Drive, Woodbury, NY 11797
8500 Balboa Boulevard, Northridge, CA 91329
A Harman International Company
* Manufactured under license from Dolby Laboratories Licensing
Corporation. "Dolby," the double-D symbol      , and "Pro Logic" 
are trademarks of Dolby Laboratories Licensing Corporation.
© 
1998 Harman Kardon, Incorporated
FEST60/80-OM-1
Cover only  2/5/99  9:47 AM  Page 3
Festival 60/80 
Owner’s Guide
Important Safeguards
2
Safety Information
3
Quickstart
4-7
Tuner
8-9
CD Changer
10-11
Aux
12
Clock
13
Speaker Placement
14-15
Bass Treble
15
Balance
15
Surround Setup
16-17
Surround Operation
18
Troubleshooting
19
Specifications
20
festival 60
festival 80
Important Safeguards
Read Instructions 
All the safety and operating instructions should be
read before the product is operated.
Follow Instructions 
All operating and use instructions should be
followed.
Retain Instructions
The safety and operating instructions should be
retained for future reference.
Heed Warnings 
All warnings on the appliance and in the operating
instructions should be adhered to.
Water and Moisture 
The appliance should not be used near water – 
for example, near a bathtub, washbowl, kitchen
sink, laundry tub, in a wet basement, near a
swimming pool, etc.
Carts and Stands 
The appliance should be used only with a cart or
stand that is recommended by the manufacturer.
An appliance and cart combination should be
moved with care. Quick stops, excessive force,
and uneven surfaces may cause the appliance 
and cart combination to overturn.
Wall or Ceiling Mounting 
The appliance should be mounted to a wall or
ceiling only as recommended by the manufacturer.
Ventilation 
The appliance should be situated so that its
location or position does not interfere with its
proper ventilation. For example, the appliance
should not be situated on a bed, sofa, rug, or
similar surface that may block the ventilation
openings; or, placed in a built-in installation 
such as a bookcase or cabinet that may impede
the flow of air through the ventilation openings.
Heat 
The appliance should be situated away from heat
sources such as radiators, heat registers, stoves, or
other appliances (including amplifiers) that produce
heat. Do not expose to direct sunlight.
Moving the Unit 
Before moving the unit, be certain to disconnect
any cords connected to other components, and
make certain that you disconnect the unit from the
AC outlet.
Grounding or Polarization 
This appliance is equipped with a polarized plug
and must be used with a polarized receptacle. The
polarization or grounding of the plug should not be
defeated. If the type of receptacle being used is not
polarized, an electrician should be contacted.
Power-Cord Protection 
Power-supply cords should be routed so that 
they are not likely to be walked on or pinched 
by items placed upon or against them, paying
particular attention to cords at plugs, convenience
receptacles, and the point where they exit from 
the appliance. We do not recommend the use 
of extension cords with this product.
Power Lines 
An outdoor antenna should be located away from
power lines.
Nonuse Periods 
The power cord of the appliance should be
unplugged from the outlet when left unused for 
a long period of time.
Object and Liquid Entry
Care should be taken so that objects do not fall
and liquids are not spilled into the enclosure
through openings.
Servicing 
Do not attempt to service this product yourself 
as opening or removing covers may expose you 
to dangerous voltage or other hazards. Refer all
servicing to qualified service personnel.
Overloading 
Do not overload wall outlets and extension cords as
this can result in a risk of fire or electric shock.
Damage Requiring Service 
The appliance should be serviced by qualified
service personnel when:
The power-supply cord of the plug has been
damaged; or
Objects have fallen, or liquid has been spilled into
the appliance; or
The appliance has been exposed to rain; or
The appliance does not appear to operate normally,
or exhibits a marked change in performance; or
The appliance has been dropped, or the enclosure
damaged.
Replacement Parts 
When replacement parts are required, be sure the
service technician has used replacement parts
specified by the manufacturer or have the same
characteristics as the original part. Unauthorized
substitutions may result in fire, electric shock, or
other hazards.
Safety Check 
Upon completion of any service or repairs, ask the
service technician to perform a safety check to
determine that the product is in proper operating
condition.
U.S. and Canadian customers should use 120 volts
AC only. Other customers should use voltages
appropriate to their area. Connecting the units to
an outlet supplying a higher voltage may create 
a fire hazard.
festival 60/80
2
ANTENNA
LEAD IN WIRE 
ANTENNA
DISCHARGE UNIT
GROUNDING CONDUCTIONS
GROUND CLAMPS
POWER SERVICE GROUNDING
ELECTRIC SYSTEM
NATIONAL ELECTRICAL CODE
ELECTRIC 
SERVICE 
EQUIPMENT
GROUND 
CLAMP
Verify Line Voltage Before Use
Festival has been designed for use with 120 volt
AC current. Connection to a line voltage other than
120 volts can create a safety and fire hazard, and
may damage the unit.
If you have any questions about the voltage
requirements for your specific model or about 
the line voltage in your area, consult your selling
dealer 
before plugging the unit into a wall outlet.
Do Not Use Extension Cords
To avoid safety hazards, use only the power cord
supplied with your unit. We do not recommend that
extension cords be used with this product.
As with all electrical devices, do not run power
cords under rugs or carpets or place heavy 
objects on them. Damaged power cords should 
be replaced immediately with cords meeting
factory specifications.
Handle the AC Power Cord Gently
When disconnecting the power cord from an AC
outlet, always pull the plug,
never pull the cord.
If you do not intend to use the unit for any
considerable length of time, disconnect the 
plug from the AC outlet.
Do Not Open the Cabinet
There are no user serviceable components inside
this product. Opening the cabinet may present a
shock hazard, and any modification to the product
will void your warranty. If water or any metal object
such as a paper clip, a wire or a staple accidentally
falls inside the unit, disconnect it from the AC
power source immediately and consult an
authorized service station.
CATV or Antenna Grounding
If an outside antenna or a cable system is
connected to this product, be certain that it is
grounded to provide some protection against
voltage surges and static charges. Section 810 of
the National Electrical Code, ANSI/NFPA No. 70-
1984, provides information with respect to proper
grounding of the mast and supporting structure,
grounding of the lead-in wire to an antenna
discharge unit, size of grounding conductors,
location of antenna discharge unit, connection to
grounding electrodes and requirements of the
grounding electrode.
NOTE TO CATV SYSTEM INSTALLER
This reminder is provided to call the CATV (Cable
TV) system installer's attention to article 820-40 
of the NEC that provides guidelines for proper
grounding and, in particular, specifies that the
cable ground shall be connected to the grounding
system of the building, as close to the point of
cable entry as possible.
Installation Location
To assure proper operation and to avoid the
potential for safety hazards, place the unit on a
firm and level surface. When placing the unit on a
shelf, be certain that the shelf and any mounting
hardware can support the weight of the product.
Make certain that proper space is provided both
above and below the unit for ventilation. If this
product will be installed in a cabinet or other
enclosed area, make certain that there is sufficient
air movement within the cabinet. Under some
circumstances a fan may be required.
Do not place the unit directly on a carpeted surface.
Avoid installation in extremely hot or cold locations,
or an area that is exposed to direct sunlight or
heating equipment.
Avoid moist or humid locations.
Do not obstruct the ventilation slots on the top 
of the unit, or place objects directly over them.
Cleaning
When the unit gets dirty, wipe it with a clean, soft,
dry cloth. If necessary, wipe it with a soft cloth
dampened with mild soapy water, and then a fresh
cloth with clean water. Wipe dry immediately with 
a dry cloth. NEVER use benzene, aerosol cleaners,
thinner, alcohol or any other volatile cleaning agent.
Do not use abrasive cleaners, as they may damage
the finish. Avoid spraying insecticide near the unit.
Moving the Unit
Before moving the unit, be certain to disconnect
any interconnection cords with other components,
and make certain that you disconnect the unit from
the AC outlet.
Important Information for the User
NOTE: This equipment has been tested and found
to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules.
The limits are designed to provide reasonable
protection against harmful interference in a
residential installation. This equipment generates,
uses and can radiate radio frequency energy 
and, if installed and used in accordance with 
the instructions, may cause harmful interference 
to radio communication. However, there is no
guarantee that harmful interference will not occur
in a particular installation. If this equipment does
cause harmful interference to radio or television
reception, which can be determined by tuning the
equipment off and on, the user is encouraged to
try to correct the interference by one or more of
the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment
and receiver.
Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV
technician for help.
This device complies with Part 15 of the FCC
Rules. Operation is subject to the following two
conditions: 1) this device may not cause harmful
interference, and 2) this device must accept
interference received, including interference 
that may cause undesired operation.
NOTE: Changes or modifications may cause this
unit to fail to comply with Part 15 of the FCC 
Rules and may void the user’s authority to 
operate the equipment.
CAUTION: 
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,
DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
The lightning flash with arrowhead symbol, within 
an equilateral triangle, is intended to alert the user to
the presence of uninsulated “dangerous voltage” within the
product’s enclosure that may be of sufficient magnitude to
constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle 
is intended to alert the user to the presence of
important operating and maintenance (servicing) instructions
in the literature accompanying the appliance.
3
Safety Information
C A U T I O N
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: 
TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.
ATTENTION: 
POUR EVITER LES CHOCS ELECTRIQUES, INRODUIRE LA LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE 
CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU‘AU FOND.
Page of 22

Download Harman Kardon FESTIVAL 60 (serv.man8) User Guide / Operation Manual

Here you can view online or download Harman Kardon FESTIVAL 60 (serv.man8) User Guide / Operation Manual in pdf. This User Guide / Operation Manual can help you recover, restore, fix, disassemble and repair Harman Kardon FESTIVAL 60 (serv.man8) Audio. Information contained in Harman Kardon FESTIVAL 60 (serv.man8) service manual (repair manual) typically includes:

  • Disassembly, troubleshooting, programming, maintenance, remote, adjustment, installation and setup instructions.
  • Schematics, wiring and block diagrams.
  • Printed wiring boards (PWB) and printed circuit boards (PCB).
  • Parts list (bill of materials).