Harman Kardon CDR 30 (serv.man6) User Manual / Operation Manual ▷ View online
8 FRONT PANEL INFORMATION DISPLAY
Front Panel Information Display
O
Record Indicator: This indicator lights
when the unit is making a recording and flashes
during the preparations for recording.
during the preparations for recording.
P
MP3 Playback Indicator: These indicators
will light when either of the decks is playing a
disc that contains MP3 data.
disc that contains MP3 data.
Q
R/RW Indicator: This indicator shows which
type of recordable disc is present in the Record
Deck %. When a CD-R disc is present, only the
R is lit. The RW lights when an erasable CD-RW
disc is in use.
Deck %. When a CD-R disc is present, only the
R is lit. The RW lights when an erasable CD-RW
disc is in use.
R
Sample-Rate Converter: This indicator
lights when the Sample-Rate Converter is in use
to change the digital sample rate when the
incoming signal is not the standard 44.1kHz
used by standard CDs. This is an automatic func-
tion and does not require any user intervention.
to change the digital sample rate when the
incoming signal is not the standard 44.1kHz
used by standard CDs. This is an automatic func-
tion and does not require any user intervention.
S
Time Indicator: This indicator lights in con-
junction with one of the time indicators
TVW
TVW
to show which of the time status
modes is active.
T
Remaining-Time Indicator: This indicator
lights when the Time/Message Display F
shows the time remaining on a disc or on a
track.
shows the time remaining on a disc or on a
track.
U
Record Time Indicator: This indicator
lights in conjunction with the REMAIN T and
TOTAL V indicators or the TRACK W indica-
tor during a recording to show that the time
figure shown in the Time/Message Display
F
TOTAL V indicators or the TRACK W indica-
tor during a recording to show that the time
figure shown in the Time/Message Display
F
is either the time remaining on the disc or
the time elapsed for the current track.
V
Total Time Indicators: These indicators
light when the Time/Message Display F
shows the total time of all tracks on a disc (in
stop mode) or the total remaining time (during
play).
shows the total time of all tracks on a disc (in
stop mode) or the total remaining time (during
play).
W
Track Time Indicators: These indicators
light when the Time/Message Display F
shows the running or remaining time of the indi-
vidual track being played. Moreover the number
of the track actually selected is shown under
these indicators.
shows the running or remaining time of the indi-
vidual track being played. Moreover the number
of the track actually selected is shown under
these indicators.
X
Digital Record Level Status Indicator:
During a digital recording, this indicator shows
ADRLC when the record level is controlled auto-
matically, and DRLC when you may control it
manually. See page 23 for more information on
record levels.
ADRLC when the record level is controlled auto-
matically, and DRLC when you may control it
manually. See page 23 for more information on
record levels.
Y
Front Input Indicator: This indicator lights
when the front panel Optical Digital ^ or
Coaxial Digital & inputs are the source for
a recording.
Coaxial Digital & inputs are the source for
a recording.
Z
Input Indicators: These indicators light to
display which input source is in use.
REAR PANEL CONNECTIONS 9
Rear Panel Connections
¡ Play (CDP)-Deck Analog Output: These
jacks carry the analog audio output signal from
the Play Deck 3 during normal play, in Single
mode also from the Record Deck %, and dur-
ing CD Dubbing. Connect them to the CD input
jacks on a receiver, preamp or processor.
jacks carry the analog audio output signal from
the Play Deck 3 during normal play, in Single
mode also from the Record Deck %, and dur-
ing CD Dubbing. Connect them to the CD input
jacks on a receiver, preamp or processor.
™ Record (CDR)-Deck Analog Output:
These jacks carry the output signal from the
Record Deck % during normal play, in Single
mode also from the Play Deck 3, and during
analog or digital recording. Connect them to the
Tape Play/In input jacks on a receiver, preamp or
processor.
These jacks carry the output signal from the
Record Deck % during normal play, in Single
mode also from the Play Deck 3, and during
analog or digital recording. Connect them to the
Tape Play/In input jacks on a receiver, preamp or
processor.
£ Record (CDR)-Deck Analog Input: These
jacks accept the analog signals that are used
for CD recordings. Connect them to the Tape
Rec/Out outputs on a receiver, preamp or pro-
cessor or directly to any analog source to be
recorded.
jacks accept the analog signals that are used
for CD recordings. Connect them to the Tape
Rec/Out outputs on a receiver, preamp or pro-
cessor or directly to any analog source to be
recorded.
¢ Play (CDP)-Deck Coaxial-Digital
Output: This jack carries the digital-audio out-
put signal from the Play Deck 3 during nor-
mal play, in Single mode also from the Record
Deck %, and during CD Dubbing. Connect it to
a coaxial-digital input on a receiver, processor or
digital decoder.
Output: This jack carries the digital-audio out-
put signal from the Play Deck 3 during nor-
mal play, in Single mode also from the Record
Deck %, and during CD Dubbing. Connect it to
a coaxial-digital input on a receiver, processor or
digital decoder.
∞ Record (CDR)-Deck Coaxial-Digital
Output: This jack carries the digital audio out-
put signal from the Record Deck % during
normal play, in Single mode also from the Play
Deck 3 and during analog or digital recording.
Connect it to a coaxial digital input on a receiv-
er, processor or digital decoder.
Output: This jack carries the digital audio out-
put signal from the Record Deck % during
normal play, in Single mode also from the Play
Deck 3 and during analog or digital recording.
Connect it to a coaxial digital input on a receiv-
er, processor or digital decoder.
§ Record (CDR)-Deck Coaxial-Digital
Input: This jack accepts the digital-audio input
signal from a compatible digital audio product
and should be connected to the coaxial-digital
output on a CD, MD or DVD player or an A/V
receiver or processor.
Input: This jack accepts the digital-audio input
signal from a compatible digital audio product
and should be connected to the coaxial-digital
output on a CD, MD or DVD player or an A/V
receiver or processor.
IMPORTANT NOTE: The coaxial digital outputs
and inputs should only be connected to digital
input or output jacks. Even though they use the
same RCA type connector as standard analog
audio connections, DO NOT connect them to
conventional analog input or output jacks.
and inputs should only be connected to digital
input or output jacks. Even though they use the
same RCA type connector as standard analog
audio connections, DO NOT connect them to
conventional analog input or output jacks.
¶ Record (CDR)-Deck Optical-Digital
Input: This jack accepts the digital-audio input
signal from a compatible digital audio product,
and should be connected directly to the optical-
digital output on a CD, MD or DVD player or an
A/V receiver or processor.
Input: This jack accepts the digital-audio input
signal from a compatible digital audio product,
and should be connected directly to the optical-
digital output on a CD, MD or DVD player or an
A/V receiver or processor.
• Record (CDR)-Deck Optical-Digital
Output: This jack carries the digital audio out-
put signal from the Record Deck % during
normal play, in Single mode also from the Play
Deck 3, and during analog or digital record-
ing. Connect it to an optical-digital input on a
receiver, processor or digital decoder.
Output: This jack carries the digital audio out-
put signal from the Record Deck % during
normal play, in Single mode also from the Play
Deck 3, and during analog or digital record-
ing. Connect it to an optical-digital input on a
receiver, processor or digital decoder.
ª Play (CDP)-Deck Optical-Digital
Output: This jack carries the digital audio out-
put signal from the Play Deck 3 during nor-
mal play, in Single mode also from the Record
Deck %, and during CD Dubbing. Connect it to
an optical-digital input on a receiver, processor
or digital decoder.
Output: This jack carries the digital audio out-
put signal from the Play Deck 3 during nor-
mal play, in Single mode also from the Record
Deck %, and during CD Dubbing. Connect it to
an optical-digital input on a receiver, processor
or digital decoder.
‚ Remote IR Input: Connect the output of a
remote infrared sensor or the remote control
output of another compatible Harman Kardon
product to this jack. This will enable the remote
control to operate even when the front-panel
Remote Sensor ¯ is blocked. This jack may
also be used with compatible IR remote control
based automation systems.
remote infrared sensor or the remote control
output of another compatible Harman Kardon
product to this jack. This will enable the remote
control to operate even when the front-panel
Remote Sensor ¯ is blocked. This jack may
also be used with compatible IR remote control
based automation systems.
⁄ Remote IR Output: Connect this jack to
the IR input jack of another compatible Harman
Kardon remote controlled product to have the
built-in Remote Sensor ¯ on the CDR 30
provide IR signals to other compatible products.
the IR input jack of another compatible Harman
Kardon remote controlled product to have the
built-in Remote Sensor ¯ on the CDR 30
provide IR signals to other compatible products.
¤ AC Power Cord: Connect this plug to an
AC outlet. If the outlet is switch controlled, make
certain that it is in the ON position, if you want
to turn the unit on.
AC outlet. If the outlet is switch controlled, make
certain that it is in the ON position, if you want
to turn the unit on.
¡
™
£
¢
∞
§
¶
•
ª
‚
⁄
¤
100-240V~, 50/60Hz 28W
¡
™
£
¢
™
£
¢
∞
§
¶
•
§
¶
•
ª
‚
⁄
¤
‚
⁄
¤
Play (CDP) Deck Analog Output
Record (CDR) Deck Analog Output
Record (CDR) Deck Analog Input
Play (CDP) Deck Coaxial-Digital Output
Record (CDR) Deck Analog Output
Record (CDR) Deck Analog Input
Play (CDP) Deck Coaxial-Digital Output
Record (CDR) Deck Coaxial-Digital Output
Record (CDR) Deck Coaxial-Digital Input
Record (CDR) Deck Optical-Digital Input
Record (CDR) Deck Optical-Digital Output
Record (CDR) Deck Coaxial-Digital Input
Record (CDR) Deck Optical-Digital Input
Record (CDR) Deck Optical-Digital Output
Play (CDP) Deck Optical-Digital Output
Remote IR Input
Remote IR Output
AC Power Cord
Remote IR Input
Remote IR Output
AC Power Cord
10 REMOTE CONTROL FUNCTIONS
Remote Control Functions
0
1
2
3
4
5
6
7
8
9
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
Power-On Button
Play Deck (CDP) Display
CDP Deck Open/Close
CDP Deck Select
Program
Reverse Search
Single Play Select
Program Check
Previous-Track
Play/Select
Random Play
Text Readout Select
Auto/Manual Track Increment Selector
Track Increment
Numeric Keys
A-B Repeat Select
Repeat
MP3 Select
Intro Scan
Level Indicator Select
Stop
Pause
Next Track
Dual Play Select
Forward Search
CDR Deck Select
CDR Deck Open/Close
CDR Display Speed
Power Off
Clear
Play Deck (CDP) Display
CDP Deck Open/Close
CDP Deck Select
Program
Reverse Search
Single Play Select
Program Check
Previous-Track
Play/Select
Random Play
Text Readout Select
Auto/Manual Track Increment Selector
Track Increment
Numeric Keys
A-B Repeat Select
Repeat
MP3 Select
Intro Scan
Level Indicator Select
Stop
Pause
Next Track
Dual Play Select
Forward Search
CDR Deck Select
CDR Deck Open/Close
CDR Display Speed
Power Off
Clear
CD
R
C
D
P
ON
OFF
PREV
PLAY/SELECT
NEXT
STOP
PAUSE
PROG.
PROG
CHECK
SEARCH
SEARCH
POWER
SINGLE
CLEAR
RANDOM
DUAL
REPEAT
AUTO/MAN TR INC.
LEVEL IND
INT.SCAN
A B
CDR/RW
u
a
b
c
d
f
g
h
i
e
k
j
m
n
TEXT
4
7
6
9
p
q
r
s
MP3
CDP
CDR
CDR
CDR
CDP
CDP
t
v
w
x
z
`
DISPL
A
Y
D
IS
PLA
Y
o
y
30
29
28
l
2
5
1
3
8
0
IMPORTANT NOTE: Some of the remote’s func-
tions including Play, Pause, Stop, Search, Next
and Previous Track, Repeat, A-B, Program,
Program Check, Clear, Random and the Numeric
Keys are shared between the two decks. Always
remember to press the CDP Select button
3 to use the remote to control the Play Deck,
or press the CDR Select button
tions including Play, Pause, Stop, Search, Next
and Previous Track, Repeat, A-B, Program,
Program Check, Clear, Random and the Numeric
Keys are shared between the two decks. Always
remember to press the CDP Select button
3 to use the remote to control the Play Deck,
or press the CDR Select button
P to control
the Record Deck.
When you press one of these buttons, an indica-
tion of CDP or CDR will appear in the appro-
priate Time/Message Display F (for more
information about functions shared see
page 15).
When you press one of these buttons, an indica-
tion of CDP or CDR will appear in the appro-
priate Time/Message Display F (for more
information about functions shared see
page 15).
REMOTE CONTROL FUNCTIONS 11
Remote Control Functions
0 Power-On Button: Press this button to
turn the CDR 30 on. Note that in order for this
control to function, the Front-Panel Power
Switch 1 must first be pressed so that the unit
is in the Standby mode.
turn the CDR 30 on. Note that in order for this
control to function, the Front-Panel Power
Switch 1 must first be pressed so that the unit
is in the Standby mode.
1 Play Deck (CDP) Display Control: Press
this button to cycle through the various time dis-
play options for the disc in the Play Deck 3.
See page 18 for more information on time-dis-
play options.
this button to cycle through the various time dis-
play options for the disc in the Play Deck 3.
See page 18 for more information on time-dis-
play options.
2 Play Deck (CDP) Open/Close: Press this
button to open or close the Play Deck 3.
button to open or close the Play Deck 3.
3 Play Deck (CDP) Select: Press this button
to control or program the functions of the disc in
the Play Deck 3.
to control or program the functions of the disc in
the Play Deck 3.
4 Program: Press this button to begin the
programming sequence for one of the CD decks.
See page 19 for more information on program-
ming the CDR 30.
programming sequence for one of the CD decks.
See page 19 for more information on program-
ming the CDR 30.
5 Reverse Search: Press this button to play
the selected disc in reverse to locate a desired
passage.
the selected disc in reverse to locate a desired
passage.
6 Single Play Select: When this button is
pressed, the CDR 30 will function as a two-disc
CD player/ changer. In the Single mode, the
audio output will be routed to all output jacks
¡™¢∞• regardless of which CD deck is
actually playing. See page 18 for more informa-
tion on the Single-Play mode.
pressed, the CDR 30 will function as a two-disc
CD player/ changer. In the Single mode, the
audio output will be routed to all output jacks
¡™¢∞• regardless of which CD deck is
actually playing. See page 18 for more informa-
tion on the Single-Play mode.
7 Program Check: Press this button to
check or edit a programmed playback sequence.
See page 19 for more information on programmed
playback.
check or edit a programmed playback sequence.
See page 19 for more information on programmed
playback.
8 Previous-Track Skip: Press this button to
skip backwards to the beginning of the track
currently being played. Press it a second time to
move back to the beginning of each previous
track.
skip backwards to the beginning of the track
currently being played. Press it a second time to
move back to the beginning of each previous
track.
9 Play/Select: This button has two functions.
It will most often be used as a standard play
button, but when setting up certain record func-
tions, it is also used as an Enter or Select button.
It will most often be used as a standard play
button, but when setting up certain record func-
tions, it is also used as an Enter or Select button.
A Random Play: Press this button to begin
random play of all tracks on a disc.
random play of all tracks on a disc.
B Text Readout Select: Press one of these
buttons to view the CD Text from the disc play-
ing in either the CDP or CDR decks. If one of the
buttons is pressed and the disc playing does not
contain text a NO TEXT message will be dis-
played in the Time/Message Display F. See
page 17 for more information on CD Text read-
out.
buttons to view the CD Text from the disc play-
ing in either the CDP or CDR decks. If one of the
buttons is pressed and the disc playing does not
contain text a NO TEXT message will be dis-
played in the Time/Message Display F. See
page 17 for more information on CD Text read-
out.
C Auto/Manual Track Increment
Selector: Press this button to select between
automatic and manual track increments during a
recording session. See pages 22-23 for more
information on track increments.
Selector: Press this button to select between
automatic and manual track increments during a
recording session. See pages 22-23 for more
information on track increments.
D Track Increment: When the Manual mode
for track increments is selected during recording,
press this button to increase the track number.
NOTE: This function does not operate during
Sync or dub recording.
for track increments is selected during recording,
press this button to increase the track number.
NOTE: This function does not operate during
Sync or dub recording.
E Numeric Keys: Press these buttons to
access a specific track for playback or during the
programming process. See page 19 for more
information on programmed playback.
access a specific track for playback or during the
programming process. See page 19 for more
information on programmed playback.
F A-B Repeat: Press this button to specify a
segment of a disc for repeat play. See page 19
for more information on repeat play.
segment of a disc for repeat play. See page 19
for more information on repeat play.
G Repeat: Press this button once to repeat
the current track. To repeat an entire disc, press
the button twice. Press it a third time to repeat
both discs in sequence (with Single mode only).
the current track. To repeat an entire disc, press
the button twice. Press it a third time to repeat
both discs in sequence (with Single mode only).
H MP3 Select: When a Multi-session disc
with both CD Audio and MP3 data is playing,
press this button to select playback of either
type of information. See page 16 for more infor-
mation on MP3 playback select.
with both CD Audio and MP3 data is playing,
press this button to select playback of either
type of information. See page 16 for more infor-
mation on MP3 playback select.
I Intro Scan: Press one of these buttons to
start the Intro Scan feature for either deck. When
Intro Scan is in use, the unit will play the first ten
seconds of each track on the disc. To play any
track in its entirety during the Intro Scan process,
press the Play Button
start the Intro Scan feature for either deck. When
Intro Scan is in use, the unit will play the first ten
seconds of each track on the disc. To play any
track in its entirety during the Intro Scan process,
press the Play Button
9.
J Level Indicator Select: Press these
buttons to select the playback or record level
display for either the play (CDP) or record (CDR)
decks. See page 18 for more information on
indicator select.
buttons to select the playback or record level
display for either the play (CDP) or record (CDR)
decks. See page 18 for more information on
indicator select.
K Stop: Press this button to stop playback or
recording.
recording.
L Pause: Press this button to momentarily
pause playback or recording. Press it again to
resume playback.
pause playback or recording. Press it again to
resume playback.
M Next-Track Skip: Press this button to skip
forward to the next track on a disc.
forward to the next track on a disc.
N Dual Play Select: Press this button to
enable both CD Decks to play back at the same
time and function as separate, independent CD
units. In this mode it is also possible to record
from an external source while the Play Deck is
functioning as a standard CD player. See page
18 for more information on dual-play capability.
enable both CD Decks to play back at the same
time and function as separate, independent CD
units. In this mode it is also possible to record
from an external source while the Play Deck is
functioning as a standard CD player. See page
18 for more information on dual-play capability.
O Forward Search: Press this button to play
a disc in a fast-forward mode.
a disc in a fast-forward mode.
P Record Deck (CDR) Select: Press this
button to control or program the functions of
the disc in the Record Deck %.
button to control or program the functions of
the disc in the Record Deck %.
Q Record Deck (CDR) Open/Close: Press
this button to open or close the Record Deck
%
this button to open or close the Record Deck
%
.
Record Deck (CDR) Display Control:
Press this button to cycle through the various
time-display options for the disc in the Record
Deck %. See page 18 for more information on
time-display options.
Press this button to cycle through the various
time-display options for the disc in the Record
Deck %. See page 18 for more information on
time-display options.
Power-Off: Press this button to place the
unit in a Standby mode.
unit in a Standby mode.
Clear: Press this button to clear an item in
a program sequence. See page 19 for more infor-
mation.
a program sequence. See page 19 for more infor-
mation.
Click on the first or last page to see other CDR 30 (serv.man6) service manuals if exist.