Harman Kardon BDT 20 - BDT 2 Service Manual ▷ View online
No display on VFD, and buttons do not work
No
No
No
Yes
Yes
No disp lay on VF D, and
buttons do not work
buttons do not work
Check ever y suppl y
voltage on main board is
voltage on main board is
normal
Refer to Power supply board part
Check the U721’s pin 61,60,59singal
Correct connection
Replace U721
Yes
Yes
Yes
No
Check38V,5V,+12V
voltage on th e po wer
and front board
voltage on th e po wer
and front board
Check th e front bo ard
signal VDIN,VCLK,
signal VDIN,VCLK,
VSTB,
1.Check whether bad solder exists
on U721 and pins of VFD,
2.Check w hether the circuit
connected to K7, K2, K3, K4, K5,
K6 is broken.
on U721 and pins of VFD,
2.Check w hether the circuit
connected to K7, K2, K3, K4, K5,
K6 is broken.
Fix the c onnection XS603 on front
board and ZD602
board and ZD602
Trouble shooting chart
5-1
harman/kardon
BDT 2 / BDT 20 Service Manual
Page 9 of 37
Remote control does not work
Go
Yes
No
yes
Remote c ontrol
does not work
does not work
NO
Replace th e batter y for remote
controller
controller
Check whether the remote
controller’s batter
controller’s batter
y is
exhausted or not.
Check the IR1 power
supply+3.3V_STBIR
Check the +3.3 V net no front board
Replace IR1
Yes
Trouble shooting chart
5-2
harman/kardon
BDT 2 / BDT 20 Service Manual
Page 10 of 37
Can’t read disc or can’t open the disk door
Yes
Check the c onnection of the 4PIN cabl e h e
Power Board.
Power Board.
Can’t rea d disc or can’t
open the disk door
open the disk door
Check SA TA cable from
main bo ard conn ection to
main bo ard conn ection to
the loader is normal
Replace the loader
NO
GO
Check w hether the
DVD loa der ru nning is
normal
DVD loa der ru nning is
normal
Fix the connection the And SATA cable from
main board
main board
NO
Yes
Trouble shooting chart
5-3
harman/kardon
BDT 2 / BDT 20 Service Manual
Page 11 of 37
No VFD display
Check whether the volt age
between VF D F+ &VFD F- is
DC 4V+/-0.4
between VF D F+ &VFD F- is
DC 4V+/-0.4
Go
No
No
No VFD display
Yes
Fix the conn ection power board
CN502 front board XS603
Check whether the volt age
5V,12V on th e front bo ard is
normal work or not.
5V,12V on th e front bo ard is
normal work or not.
Check DC12V to AC 4V switch circuit
Replace U
602
Yes
Check w
hether
the
voltage 38 V is normal
No
Check the ZD602 on the front board
Trouble shooting chart
5-4
harman/kardon
BDT 2 / BDT 20 Service Manual
Page 12 of 37
Click on the first or last page to see other BDT 20 - BDT 2 service manuals if exist.