Harman Kardon BDS 577 EMC - CB Certificate ▷ View online
Page 4 of 40
Report Ref. No.: 211-2012016-000
Jiangsu TÜV Product Service Limited. - Shenzhen Branch
TRF No. IEC60065K
Extend view of the marking
(for BDS 575 and BDS 577 only)
(for BDS 275 and BDS 277 only)
The label of BDS 575 and BDS 577 is identical except model name. The label of BDS 275 and BDS 277 is
identical except model name.
identical except model name.
Page 5 of 40
Report Ref. No.: 211-2012016-000
Jiangsu TÜV Product Service Limited. - Shenzhen Branch
TRF No. IEC60065K
Test item particulars:
Classification of installation and use ...................... : Class II
Supply Connection .................................................... : AC inlet, detachable power supply cord
Possible test case verdicts:
- test case does not apply to the test object .......... : N/A (Not Applicable)
- test object does meet the requirement ................. : P (Pass)
- test object does not meet the requirement .......... : F (Fail)
Testing:
Date of receipt of test item ........................................ : 2012-05-16
Date (s) of performance of tests .............................. : From 2012-05-17 to 2012-07-13
General remarks:
The test results presented in this report relate only to the object tested.
This report shall not be reproduced, except in full, without the written approval of the Issuing testing
laboratory.
"(see Enclosure #)" refers to additional information appended to the report.
"(see appended table)" refers to a table appended to the report.
Throughout this report a
This report shall not be reproduced, except in full, without the written approval of the Issuing testing
laboratory.
"(see Enclosure #)" refers to additional information appended to the report.
"(see appended table)" refers to a table appended to the report.
Throughout this report a
comma /
point is used as the decimal separator.
Manufacturer’s Declaration per sub-clause 6.2.5 of IECEE 02:
The application for obtaining a CB Test Certificate
includes more than one factory location and a
declaration from the Manufacturer stating that the
sample(s) submitted for evaluation is (are)
representative of the products from each factory
has been provided ...................................................... :
includes more than one factory location and a
declaration from the Manufacturer stating that the
sample(s) submitted for evaluation is (are)
representative of the products from each factory
has been provided ...................................................... :
Yes
Not applicable
When differences exist; they shall be identified in the General product information section.
Name and address of factory (ies) .......................... : TCL Technoly Electronics (Huizhou) Co., Ltd.
1. Section 19, Zhongkai High-tech Development
Zone, 516006 Huizhou City, Guang Dong Province,
PEOPLE’S REPUBLIC OF CHINA;
2. TCL TECHNOLY ELECTRONICS
(HUIZHOU) CO., LTD.
Zone, 516006 Huizhou City, Guang Dong Province,
PEOPLE’S REPUBLIC OF CHINA;
2. TCL TECHNOLY ELECTRONICS
(HUIZHOU) CO., LTD.
Section 37, Zhongkai High-tech Development Zone,
516006 Huizhou City, Guang Dong Province,
PEOPLE’S REPUBLIC OF CHINA
516006 Huizhou City, Guang Dong Province,
PEOPLE’S REPUBLIC OF CHINA
General product information:
1.
Blu-Ray Disc System, model No. BDS 575, BDS 275, BDS 577 and BDS 277 manufactured by
Harman International Industries, Incorporated. USB Max. output load: 5VDC, 2.1A.
Harman International Industries, Incorporated. USB Max. output load: 5VDC, 2.1A.
2.
All models are similar except output audio terminals, rated input power, wifi and airplay function, see
below for details
below for details
BDS 575
BDS 577
BDS 275
BDS 277
Audio terminals
5ch output
5ch output
2ch output
2ch output
WIFI and Airplay
No
Yes
No
Yes
Rated input power
120W
120W
90W
90W
3.
All tests were conducted on model BDS 575 which represents other models;
4.
The maximum operating temperature is 45
C.
Page 6 of 40
Report Ref. No.: 211-2012016-000
IEC 60065
Clause
Requirement + Test
Result - Remark
Verdict
Jiangsu TÜV Product Service Limited. - Shenzhen Branch
TRF No. IEC60065K
3
General requirements
Safety class of the apparatus .................................. : Class II
P
4
General test conditions
4.1.4
Ventilation instructions require the use of the test
box
box
Test box used
P
5
Marking and instructions
Comprehensible and easily discernible
P
Permanent durability against water and petroleum
spirit
spirit
P
5.1
a) Identification, maker ............................................. : harman/kardon
P
b) Model number or type reference .......................... : BDS 575, BDS 275, BDS 577,
BDS 277
P
c) Class II symbol if applicable ................................ : Symbol according to IEC
60417-5172 used
P
d) Nature of supply .................................................... :
P
e) Rated supply voltage ........................................... : 100-240VAC
P
f) Mains frequency if safety dependant ................... : 50/60Hz
P
g) Rated current or power consumption for
apparatus supplied by supply apparatus for general
use ............................................................................ :
apparatus supplied by supply apparatus for general
use ............................................................................ :
N/A
Measured current or power consumption ............... :
N/A
Deviation % (max 10%) ........................................... :
N/A
h) Rated current or power consumption for apparat-
us intended for connection to an a.c. mains supply . :
us intended for connection to an a.c. mains supply . :
120W for BDS 575, BDS 577;
90W for BDS 275, BDS 277
90W for BDS 275, BDS 277
P
Measured current or power consumption ............... : 77.9W for BDS 575, BDS 577;
64.7W for BDS 275, BDS 277
P
Measured current or power consumption for
Television set ........................................................... :
Television set ........................................................... :
N/A
Deviation % (max 10%) ........................................... : -28.1% Max.
P
5.2
a) Earth terminal
N/A
b) Hazardous live terminals
N/A
c) Markings on supply output terminals
N/A
5.3
a) Use of triangle with exclamation mark
Provided in circuit diagram
P
b) marking on loudspeaker grille, IEC 60417-5036
N/A
5.4
Instructions for use
Provided
P
5.4.1
a) Mains powered equipment not exposed to
dripping or splashing. Warning concerning objects
filled with liquid, etc.
dripping or splashing. Warning concerning objects
filled with liquid, etc.
P
Page 7 of 40
Report Ref. No.: 211-2012016-000
IEC 60065
Clause
Requirement + Test
Result - Remark
Verdict
Jiangsu TÜV Product Service Limited. - Shenzhen Branch
TRF No. IEC60065K
b) Hazardous live terminals, instructions for wiring
No such terminals
N/A
c) Instructions for replacing lithium battery
N/A
d) Class I earth connection warning
N/A
e) Instructions for multimedia system connection
P
f) Special stability warning for attachment of the
apparatus to the floor/wall
apparatus to the floor/wall
N/A
g) Warning: battery exposure to heat
Batteries in remote control
P
h) Warning: protective film on CRT face
N/A
5.4.2
a-b) Disconnect device: plug/coupler or all-pole
mains switch location, accessibility and markings
mains switch location, accessibility and markings
AC inlet was used as
disconnect device
disconnect device
P
c) Instructions for permanently connected equipment
N/A
Marking, signal lamps or similar for completely
disconnection from the mains
disconnection from the mains
N/A
6
Hazardous radiation
6.1
Ionizing radiation < 36 pA/kg (0,5 mR/h)
No ionizing radiation
N/A
Ionizing radiation under fault condition
N/A
6.2
Laser radiation, emission limits to IEC 60825-1:2007
................................................................................... :
................................................................................... :
Class 1
P
Emission limits under fault conditions ..................... : Class 1
P
7
Heating under normal operating conditions
7.1
Temperature rises not exceeding specified values;
fuse links and other protective devices defeated
fuse links and other protective devices defeated
(see appended table)
P
7.1.1
Temperature rise of accessible parts
(see appended table)
P
7.1.2
Temperature rise of parts providing electrical
insulation
insulation
(see appended table)
P
7.1.3
Temperature rise of parts acting as a support or as a
mechanical barrier
mechanical barrier
(see appended table)
P
7.1.4
Temperature rise of windings
(see appended table)
P
7.1.5
Parts not subject to a limit under 7.1.1 to 7.1.4
(see appended table)
P
7.2
Softening temperature of insulating material
supporting parts conductively connected to the
mains carrying a current > 0,2 A at least 150
supporting parts conductively connected to the
mains carrying a current > 0,2 A at least 150
o
C
LF501, LF502, L501, T501,
T502 bobbin
T502 bobbin
P
8
Constructional requirements with regard to the protection against electric
shock
shock
8.1
Conductive parts covered by lacquer, paper,
untreated textile oxide films and beads etc.
considered to be bare
untreated textile oxide films and beads etc.
considered to be bare
P
Click on the first or last page to see other BDS 577 service manuals if exist.