Harman Kardon BDS 277 (serv.man2) EMC - CB Certificate ▷ View online
R
AUDIX Technology (Shenzhen) Co., Ltd.
Audix Technology (Shenzhen) Co., Ltd. Report No. ACS-E12377 page 13 of 323
2.5. Measurement Uncertainty(95% confidence levels, k=2)
Test Item
Uncertainty
Uncertainty for Conduction emission test
in No. 1 Conduction
3.2 dB(150kHz to 30MHz)
3.6dB (30~200MHz, Polarize: H)
3.8dB (30~200MHz, Polarize: V)
3.8dB (30~200MHz, Polarize: V)
3.8dB (200M~1GHz, Polarize: H)
Uncertainty for Radiation Emission test
in 10m chamber (Distance: 10m)
3.8dB (200M~1GHz, Polarize: V)
3.6 dB (30~200MHz, Polarize: H)
3.6 dB (30~200MHz, Polarize: H)
3.8dB (30~200MHz, Polarize: V)
4.2dB (200M~1GHz, Polarize: H)
Uncertainty for Radiation Emission test
in 3m chamber
3.8dB (200M~1GHz, Polarize: V)
3.1dB (Distance: 3m Polarize: V)
Uncertainty for Radiation Emission test in
3m chamber (1GHz-18GHz)
3.7 dB (Distance: 3m Polarize: H)
2.4dB (Distance: 3m Polarize: V)
Uncertainty for SVSWR in 10m Chamber
2.4 dB (Distance: 3m Polarize: H)
Uncertainty for Flicker test
0.06%
Uncertainty for Harmonic test
1.8%
1.36dB (Using CDN test)
Uncertainty for C/S Test
3.20 (Using EM clamp test)
1.64 dB (80MHz~200MHz)
1.64 dB (80MHz~200MHz)
Uncertainty for R/S Test
1.66 dB(200MHz~1000MHz)
EN 55020 S3
0.54 dB
0.6℃
Uncertainty for test site temperature and
humidity
3%
R
AUDIX Technology (Shenzhen) Co., Ltd.
Audix Technology (Shenzhen) Co., Ltd. Report No. ACS-E12377 page 14 of 323
3. POWER LINE CONDUCTED EMISSION TEST
3.1. Test Equipments
Item Equipment
Manufacturer
Model No. Serial No.
Last Cal.
Cal. Interval
1. Test Receiver Rohde & Schwarz
ESHS10
838693/001 Oct.31, 11
1 Year
2.
L.I.S.N.#1
Rohde & Schwarz ESH2-Z5
834066/011 Oct.31, 11
1 Year
3.
L.I.S.N.#3
Kyoritsu
KNW-242C
8-1920-1
May.08, 12
1 Year
4. Terminator Hubersuhner
50
Ω
No. 1
May.08, 12
1 Year
5. Terminator Hubersuhner
50
Ω
No. 2
May.08, 12
1 Year
6.
RF Cable
Fujikura
3D-2W
No.1
May.08, 12
1Year
7. Coaxial Switch
Anritsu
MP59B
M50564
May.08, 12
1 Year
8.
Pulse Limiter Rohde & Schwarz ESH3-Z2
100341
May.08, 12
1 Year
9.
Oscilloscope
Tektronix
TDS3052B
B026036
May.20, 12
1 Year
3.2. Block Diagram of Test Setup
3.3. Test Standard
EN55022: 2010 (Class B) and EN 55013: 2001+A1: 2003+A2:2006
3.4. Power Line Conducted Emission Limit
Limits dB(
μV)
Frequency
MHz
Quasi-peak Level
Average Level
0.15 ~
0.50
66 ~ 56*
56 ~ 46*
0.50 ~
5.00
56
46
5.00 ~ 30.00
60
50
Notes: 1. *Decreasing linearly with logarithm of frequency.
2. The lower limit shall apply at the transition frequencies.
EUT
Peripheral
LISN#1
LISN#3
PC System
80cm
Receiver
:50
Ω Terminator
0.8m
R
AUDIX Technology (Shenzhen) Co., Ltd.
Audix Technology (Shenzhen) Co., Ltd. Report No. ACS-E12377 page 15 of 323
3.5. EUT Configuration on Test
The following equipments are installed on conducted emission test to meet EN55013 and
EN55022 requirement and operating in a manner which tends to maximize its emission
characteristics in a normal application.
3.5.1.BLU-RAY DISC SYSTEM
EN55022 requirement and operating in a manner which tends to maximize its emission
characteristics in a normal application.
3.5.1.BLU-RAY DISC SYSTEM
Model Number
: BDS575
Serial Number
: N/A
3.5.2.Support Equipment : As Tested Supporting System Detail, in Section 2.2.
3.6. Operating Condition of EUT
3.6.1.Setup the EUT and simulators as shown in Section 3.2.
3.6.2.Turn on the power of all equipments.
3.6.3. Let the EUT worked in test mode (BD Play/USB Play/BD Live/FM Mode/Coaxial In/
3.6.2.Turn on the power of all equipments.
3.6.3. Let the EUT worked in test mode (BD Play/USB Play/BD Live/FM Mode/Coaxial In/
AUX In / Component Video IN/ Optical In / HDMI In) and test it.
3.7. Test Procedure
The EUT was placed on a non-metallic table, 80cm above the ground plane. The EUT
Power connected to the power mains through a line impedance stabilization network
(L.I.S.N. #1).The other peripheral devices power cord connected to the power mains
through a line impedance stabilization network (L.I.S.N.#3). This provided a 50ohm
coupling impedance for the tested equipments. Both sides of AC line are checked to find
out the maximum conducted emission levels according to the EN55013 and EN55022
regulations during conducted emission test.
The bandwidth of the test receiver (R&S Test Receiver ESHS10) is set at 10kHz.
The frequency range from 150kHz to 30MHz is checked. The test result are reported on
Section 3.8.
Power connected to the power mains through a line impedance stabilization network
(L.I.S.N. #1).The other peripheral devices power cord connected to the power mains
through a line impedance stabilization network (L.I.S.N.#3). This provided a 50ohm
coupling impedance for the tested equipments. Both sides of AC line are checked to find
out the maximum conducted emission levels according to the EN55013 and EN55022
regulations during conducted emission test.
The bandwidth of the test receiver (R&S Test Receiver ESHS10) is set at 10kHz.
The frequency range from 150kHz to 30MHz is checked. The test result are reported on
Section 3.8.
R
AUDIX Technology (Shenzhen) Co., Ltd.
Audix Technology (Shenzhen) Co., Ltd. Report No. ACS-E12377 page 16 of 323
3.8. Power Line Conducted Emission Test Results
PASS. (All emissions not reported below are too low against the prescribed limits.)
The EUT with the following test modes were tested and selected (mode 1~10) to read Q.P
values, all the test results are listed in next pages.
values, all the test results are listed in next pages.
EUT: BLU-RAY DISC SYSTEM Model No. : BDS575
Test Date: Jun.29, 2012 Temperature: 25.5℃ Humidity: 55%
The details of test modes are as follows:
Reference Test Data No.
No. Test
Mode
Line
Neutral
1.
BD Play
#7 #6
2.
USB Play
#5
#4
3. ※
BD Live
#2
#3
4. Coaxial
In
#12
#13
5. Optical
In
#15
#14
6.
Component Video In
#16
#17
7. AUX
In
#9
#8
8.
HDMI In
#11
#10
9. FM
98MHz(UNGND)
#18
#19
10. FM
98MHz(GND)
#21
#20
(※ Worst test mode)
Click on the first or last page to see other BDS 277 (serv.man2) service manuals if exist.