Harman Kardon AVR 355 (serv.man7) Service Manual ▷ View online
Programming the Remote
Notes on Using the AVR
Remote With Other Devices.
• Manufacturers may use different code sets for
the same product category. For that reason, it is
important that you check to see if the code set
you have entered operates as many controls as
possible. If it appears that only a few functions
operate, check to see if another code set will
work with more buttons.
Remote With Other Devices.
• Manufacturers may use different code sets for
the same product category. For that reason, it is
important that you check to see if the code set
you have entered operates as many controls as
possible. If it appears that only a few functions
operate, check to see if another code set will
work with more buttons.
• Depending on the brand and product type
used the functions listed in the Function List
tables may not correspond with the function the
unit reacts on the command. In these cases it’s a
good idea to edit the reaction of the unit into
the corresponding line of the table or to set up a
separate list.
used the functions listed in the Function List
tables may not correspond with the function the
unit reacts on the command. In these cases it’s a
good idea to edit the reaction of the unit into
the corresponding line of the table or to set up a
separate list.
• When a button is pressed on the AVR remote,
the red light under the Input Selector cy
for the product being operated should flash
briefly. If the Device Control Selector flashes for
some but not all buttons for a particular
product, it does NOT indicate a problem with the
remote, but rather that no function is
programmed for the button being pushed.
the red light under the Input Selector cy
for the product being operated should flash
briefly. If the Device Control Selector flashes for
some but not all buttons for a particular
product, it does NOT indicate a problem with the
remote, but rather that no function is
programmed for the button being pushed.
Punch-Through Programming
The AVR 355/AVR 255 remote’s punch-through
feature allows you to select one component for
the remote to operate, while simultaneously set-
ting certain groups of controls to operate anoth-
er component. For example, while using the AVR
to control surround modes and other audio func-
tions, you may operate the transport controls of
your DVD player. Or while using the remote to
control video functions on your TV, you may use
your cable box to change channels.
feature allows you to select one component for
the remote to operate, while simultaneously set-
ting certain groups of controls to operate anoth-
er component. For example, while using the AVR
to control surround modes and other audio func-
tions, you may operate the transport controls of
your DVD player. Or while using the remote to
control video functions on your TV, you may use
your cable box to change channels.
To program punch-through control while operat-
ing any device:
ing any device:
1. Press and hold the Source Selector (or AVR
selector) for the main device the remote will
be operating. The Source Selector will light, go
dark and then light up again, indicating the
remote is in Program mode and that you may
release the button.
be operating. The Source Selector will light, go
dark and then light up again, indicating the
remote is in Program mode and that you may
release the button.
2. Select the type of punch-through program-
ming.
a) To program channel control punch-through,
press the Channel Up Button.
b) To program transport control punch-
through, press the Play Button.
a) To program channel control punch-through,
press the Channel Up Button.
b) To program transport control punch-
through, press the Play Button.
3. Press the Source Selector for the device whose
channel or transport controls you would like
to be active while operating the device you
selected in the first step. The Source Selector
will flash to confirm the programming.
to be active while operating the device you
selected in the first step. The Source Selector
will flash to confirm the programming.
For example, if you wish to watch your TV while
changing channels using your cable box, first
press the TV Button until it lights. Then press the
Channel Up Button, followed by the CBL/SAT
Button.
changing channels using your cable box, first
press the TV Button until it lights. Then press the
Channel Up Button, followed by the CBL/SAT
Button.
To undo punch-through programming, follow
the same steps as above, but press the same
Source Selector in Steps 1 and 3.
the same steps as above, but press the same
Source Selector in Steps 1 and 3.
NOTE: The remote always allows volume-control
punchthrough, since the Volume and Mute con-
trols are dedicated to the AVR.
punchthrough, since the Volume and Mute con-
trols are dedicated to the AVR.
Resetting the Remote Memory
As you add components to your home-theater
system, occasionally you may wish to totally
reprogram the remote control without the
confusion of any commands, activities or ”Punch-
Through“ programming that you may have done.
To do this, it is possible to reset the remote to the
original factory defaults and command codes by
following these steps. Note, however, that once
the remote is reset, all commands or codes that
you have entered will be erased and will need to
be re-entered:
system, occasionally you may wish to totally
reprogram the remote control without the
confusion of any commands, activities or ”Punch-
Through“ programming that you may have done.
To do this, it is possible to reset the remote to the
original factory defaults and command codes by
following these steps. Note, however, that once
the remote is reset, all commands or codes that
you have entered will be erased and will need to
be re-entered:
1. Press the TV Device Button c and the "0"
number Button k simultaneously. The TV button
lights up.
number Button k simultaneously. The TV button
lights up.
2. Press the ”3“ button k three times.
3. After a number of seconds, depending on the
number of commands that are programmed and
need erasing, all the Device Buttons c as well as
the AVR Button y blink 3 times to indicate that
the remote has been reset to the factory settings.
number of commands that are programmed and
need erasing, all the Device Buttons c as well as
the AVR Button y blink 3 times to indicate that
the remote has been reset to the factory settings.
ENGLISH
harman/kardon
AVR 355/230 Service Manual
Page 5 of 125
2. Package Drawing
AVR355/230
SNOW PAD (R)
4
BOX ,OUT CARTON
6
SET
5
SNOW PAD (L)
3
MICROPHONE ASS'Y
7
ACCESSORY-2
7
1. Instruction manual ass'y - Accessories
NO
DESCRIPTION
PARTS NO.
Q,ty
1
2
3
4
6
8
1
1
ACCESSORY-1
CPB1061W
POLY BAG
CSA1A027Z
AM LOOP ANTENNA ASS'Y
1
BATTERY
6
COVER ASS'Y
CGRAVR350/230ZA
REMOCON ASS'Y
CARTZONE24
1
1
1
CGR2A437
CQE1A220Z
CPS1A676
1
CPB1A176Z
1
1
2
5
6
7
CGR2A436
1
PAD , COVER
COVER A
COVER B
SHEET,FRONT COVER
BAG , POLY
7
IMAGE BROCHURES
HQE1A273Z
1
9
STAPLE
CPL0905
3
1
CGX1A392C66
3
4
CGX1A391C66
1
ORNAMENT , AL A
ORNAMENT , AL B
NO
DESCRIPTION
PARTS NO.
Q,ty
11
12
13
14
1
CPB1061W
POLY BAG
CQX1A1318Z
MANUAL,INSTRUCTION
MANUAL ,SETUP GUIDE
1
1
BOOKLET,INFORMATION
CQE1A180Z
1
STAPLE
CPL0905
3
ACCESSORY-2
POLY BAG
1
2
3
AM LOOP ANTENNA ASS'Y
BATTERY ASS'Y
CQX1A1320Z
A
REMOCON ASS'Y
CARTAVR355/230
1
MICROPHONE ASS'Y
B
B
MICROPHONE ASS'Y
CJXAVR340MICRO
1
STAPLE
REMOCON ASS'Y
A
5
FM 1 POLE ANT
6
COVER ASS'Y
POLY BAG
7
BOOKLET,INFORMATION
12
IMAGE BROCHURES
11
STAPLE
9
REMOCON ASS'Y
8
4
10
MANUAL SETUP GUIDE
14
MANUAL INSTRUCTION
13
CORD , POWER(EUR)
10
ACCESSORY-1
BOX,OUT CARTON
3
4
1
DESCRIPTION
NO
CPS6A564
CQXAVR355/230
CPG1A855U
1
1
1
Q,ty
PARTS NO.
CPS6A565
SNOW,PAD(R)
2
1
SNOW,PAD(L)
SET
AVR355/230SET
1
5
ACCESSORY-2
6
CQXAVR355/230
1
MICROPHONE ASS'Y
7
CJXAVR340MICRO
1
8
CARTAVR355/230
1
REMOCON ASS'Y
MANUAL ASS'Y
1
REMOCON ASS'Y
2
5
FM 1 POL ANT
CSA1A018Z
1
CABR03P
1
CORD , POWER
CJA2B054Z
harman/kardon
AVR 355/230 Service Manual
Page 6 of 125
1
1. Removing the Top Cabinet
Remove the Screws
DISASSEMBLY
~
13
Remove the Screws
2. Removing the Front Panel
1
9
~
Remove the Screws
4. Removing the Main PCB
~
1
7
~
1
34
Remove the Screws
3. Removing the Rear Panel
AVR355/230
1
2
5
4
6
11
10
7
9
13
3
12
8
5
31
15
14
13
24
12
25
27 28
9
8
3
1
28
30
6
2
16
17
34
33
18
19
0N
OFF
4
7
20
21
23
26
32
35
6
3
4
7
1
2
5
22
11
10
7
5
6
8
9
4
3
2
1
harman/kardon
AVR 355/230 Service Manual
Page 7 of 125
S1
4
5
26
27
28
29
36
S1
S6
S5
S15
S5
S6
S5
S13
19
S1
1
S1
S14
S15
S15
S9
S12
S10
S7
S8
S8
S6
S5
S4
S2
S3
S3
NO
13
CTB3+8JFZR
SCREW
SCREW
SCREW
CHD4A012ZR
CHD1A023R
CHD1A023R
CHD1A012R
SCREW,TRANS
SCREW
SCREW
SCREW
SCREW
SCREW
SCREW
SCREW
SCREW
CTB3+8JR
CTW3+8JR
CTB3+6FFZR
CTW3+12JR
CTW3+12JR
CTB4+6FFZR
CTB3+6JR
CTB3+10JFZR
CTWS3+10GR
5
4
4
21
2
6
6
10
12
12
15
26
1
6
DESCRIPTION
PARTS NO.
Q,ty
S3
S3
S5
37-3
S2
S13
40-2
S14
37-6
S15
16
PLATE , SHIELD
CMC1A323
BRACKET,PCB(H/T)
SUPPORT,CUSHION
FRONT PCB ASS'Y
29
BRACKET,TRANS
36
37
37
30
31
32
33
31
32
33
35
34
TRANS,POWER
PANEL,REAR
BRACKET,PCB
23
24
25
26
24
25
26
28
27
17
18
19
20
18
19
20
22
21
HOLDER,PCB
BRACKET,PCB
HEAT SINK
FOOT A
FOOT B
FOOT B
BRACKET,FIP
CHASSIS,BOTTOM
CABINET,TOP
CMD2A487
CKF8A337Z
COP12053J
CMD1A387
CMD1A398
CMY1A303
CUA1A282
CKL1A095
CKC6B145S60
CMD1A209
CHE170
CMD1A417
CHG1A104Z
CKL1A094
INDICATOR,VOLUME
BADGE,AVR355
3
10
11
12
13
11
12
13
15
14
7
6
5
4
9
8
PANEL , FRONT
WINDOW , FIP
BADGE, HARMAN/KARDON
FILTER , FIP
NO
2
1
HOLDER,VOLUME
CAP,VOLUME
DESCRIPTION
CGL1A222
CGB1A158Y
CGB1A158Y
CMZ1A127
CGW1A447RHVB24
CGB1A194Z
CGU1A410A25W
CGX1A338MBC63
PARTS NO.
CMH1A214
1
1
1
1
1
2
1
1
2
1
2
2
2
2
2
2
1
1
1
11
1
1
1
1
1
1
Q,ty
1
1
46
37-1
37-2
37-3
37-4
37-5
37-6
37-2
37-3
37-4
37-5
37-6
FIP & KEY PCB
POWER LED PCB
PHONE PCB
VOLUME PCB
GUIDE PCB(CARD CABLE)
38
MAIN PCB ASS'Y
COP12026J
1
38-1
MAIN PCB
1
1
1
1
1
1
1
1
1
1
1
39
INPUT PCB ASS'Y
COP12029J
1
39-1
39-2
39-2
INPUT PCB
ADD PCB
ADD PCB
1
POWER PCB ASS'Y
40
COP12027J
1
40-1
DIGITAL IN/OUT PCB
1
47
ORNAMENT,VOLUME
CGU1A318Y
1
CHG1A160Z
CUSHION
1
1
1
1
CGX1A390C66X
SHEET,AL FRONT
1
REMARK
VIDEO PCB ASS'Y
41
COP12033J
1
TUNER MODULE
42
1
43
44
44
1
1
48
49
50
49
50
CLT5W033ZE
38-2
GUIDE PCB(CARD CABLE)
1
40-2
REGULATOR PCB(A)
9
40-3
TRANS PCB
1
40-4
TRANS PCB
1
40-5
REGULATOR PCB(B)
1
CNVM9014MS171L
45
HDMI PCB ASS'Y
COP12035J
1
51
30
52
2
3
KNOB , STANDBY
CBT1A1064
1
KNOB , BACK
CBT1A1065
INDICATOR , POWER
CGL1A265Y
BRACKET , SIDE
CMD2A443
1
1
1
HOLDER , LED
CMH2A215
1
46
47
CUSHION , FOOT
CHG1A373
4
37-1
37-5
VIDEO PCB
SCREW
CTB3+10JR
29
SCREW
S3
S11
SCREW
CT33+8JFZR
4
S16
CHD1A036R
SCREW, SPECIAL
4
S13
SCREW
CHD3A012R
21
S10
S10
PLATE , EARTH
CMC2A325
2
53
PLATE,EARTH
CMC2A326
1
S12
50
S8
S8
33
PLATE , EARTH
CMC2A338
54
S6
S15
52
53
S16
30
S7
31
S7
51
S15
53
32
S10
S9
x2
45
38-1
40-7
44
S10
S10
S8
S10
49
S2
48
37-2
37-4
S2
S3
S5
RUBBER
CHG1A309
1
1
BRACKET,PCB
CMD1A636
1
REGULATOR PCB ASS'Y
COP12055J
1
MULTI PCB ASS'Y
COP12036J
1
BRACKET, SIDE(L)
CMD1A555
1
43
BRACKET, FAN
CMD1A600
1
BRACKET, FAN
CMD2A615
1
FAN , MOTOR
CFNCF12825HSN
2
HEAT SINK
CMY2A249
1
S5
38-2
54
MOMS SW ASS'Y
CSHAVR155ZA
2
40-6
1
40-7
REMOTE PCB
1
REGULATOR PCB(C)
39-2
42
41
40-1
39-1
40-3
40-4
40-5
S2
12
21
22
8
6
9
13
10
24
25
23
25
23
25
25
24
11
15
20
7
S11
S11
S11
S11
17
16
14
18
AVR355/230 EXPLODED VIEW
harman/kardon
AVR 355/230 Service Manual
Page 8 of 125
Click on the first or last page to see other AVR 355 (serv.man7) service manuals if exist.