Harman Kardon AVR 171 (serv.man5) EMC - CB Certificate ▷ View online
Page 6 of 6
Report No.: 232174
ATTACHMENT 6
Clause
Requirement + Test
Result - Remark
Verdict
TRF No. IEC60065K
Annex J.6 After the first paragraph, added a paragraph:
For apparatus intended to be operated at altitudes
between 2 000m and 5 000m, the Minimum
CLEARANCES in table J.2 shall multiply with
multiplication factor 1.48 in table A.2 of GB/T
16935.1. For apparatus intended to be operated at
altitude more than 5 000m, Minimum
CLEARANCES shall multiply with corresponding
multiplication factor in table A.2 of GB/T 16935.1.
between 2 000m and 5 000m, the Minimum
CLEARANCES in table J.2 shall multiply with
multiplication factor 1.48 in table A.2 of GB/T
16935.1. For apparatus intended to be operated at
altitude more than 5 000m, Minimum
CLEARANCES shall multiply with corresponding
multiplication factor in table A.2 of GB/T 16935.1.
The apparatus intended to
be operated at altitudes up to
2 000m.
be operated at altitudes up to
2 000m.
N/A
Delete note 3 of table J.6.
Noted
Annex R
(normativ
e)
(normativ
e)
Added annex R:
Instructions for the new safety warning labels.
R.1 Altitude warning label
Instructions for the new safety warning labels.
R.1 Altitude warning label
Meaning of the label: Evaluation for apparatus only
based on altitude not exceeding 2000m, therefor it’s
the only operating condition applied for the
equipment .There may be some potential safety
hazard if the equipment is used at altitude above
2000m .
R.2 Climate warning label
based on altitude not exceeding 2000m, therefor it’s
the only operating condition applied for the
equipment .There may be some potential safety
hazard if the equipment is used at altitude above
2000m .
R.2 Climate warning label
Meaning of the label: Evaluation for apparatus only
based on temperate climate condition, therefor it’s
the only operating condition applied for the
equipment .There may be some potential safety
hazard if the equipment is used in tropical climate
region.
based on temperate climate condition, therefor it’s
the only operating condition applied for the
equipment .There may be some potential safety
hazard if the equipment is used in tropical climate
region.
The apparatus intended to
be operated at altitudes up to
2 000m, and a
be operated at altitudes up to
2 000m, and a
ppropriate
wording provided as follows,
See copy of marking plate
The apparatus intended to
be used in not tropical climate
regions, and a
be used in not tropical climate
regions, and a
ppropriate
wording provided as follows
See copy of marking plate.
N/A
Annex S
(informativ
e)
e)
Added annex S:
Illustration relative to safety explanation in
normative Chinese、Tibetan、Mongolian、Zhuang
Language and Uighur.
Illustration relative to safety explanation in
normative Chinese、Tibetan、Mongolian、Zhuang
Language and Uighur.
Language of relative to safety:
Chinese.
Chinese.
N/A
Page 6 of 6
Report No.: 232174
ATTACHMENT 6
Clause
Requirement + Test
Result - Remark
Verdict
TRF No. IEC60065K
Annex J.6 After the first paragraph, added a paragraph:
For apparatus intended to be operated at altitudes
between 2 000m and 5 000m, the Minimum
CLEARANCES in table J.2 shall multiply with
multiplication factor 1.48 in table A.2 of GB/T
16935.1. For apparatus intended to be operated at
altitude more than 5 000m, Minimum
CLEARANCES shall multiply with corresponding
multiplication factor in table A.2 of GB/T 16935.1.
between 2 000m and 5 000m, the Minimum
CLEARANCES in table J.2 shall multiply with
multiplication factor 1.48 in table A.2 of GB/T
16935.1. For apparatus intended to be operated at
altitude more than 5 000m, Minimum
CLEARANCES shall multiply with corresponding
multiplication factor in table A.2 of GB/T 16935.1.
The apparatus intended to
be operated at altitudes up to
2 000m.
be operated at altitudes up to
2 000m.
N/A
Delete note 3 of table J.6.
Noted
Annex R
(normativ
e)
(normativ
e)
Added annex R:
Instructions for the new safety warning labels.
R.1 Altitude warning label
Instructions for the new safety warning labels.
R.1 Altitude warning label
Meaning of the label: Evaluation for apparatus only
based on altitude not exceeding 2000m, therefor it’s
the only operating condition applied for the
equipment .There may be some potential safety
hazard if the equipment is used at altitude above
2000m .
R.2 Climate warning label
based on altitude not exceeding 2000m, therefor it’s
the only operating condition applied for the
equipment .There may be some potential safety
hazard if the equipment is used at altitude above
2000m .
R.2 Climate warning label
Meaning of the label: Evaluation for apparatus only
based on temperate climate condition, therefor it’s
the only operating condition applied for the
equipment .There may be some potential safety
hazard if the equipment is used in tropical climate
region.
based on temperate climate condition, therefor it’s
the only operating condition applied for the
equipment .There may be some potential safety
hazard if the equipment is used in tropical climate
region.
The apparatus intended to
be operated at altitudes up to
2 000m, and a
be operated at altitudes up to
2 000m, and a
ppropriate
wording provided as follows,
See copy of marking plate
The apparatus intended to
be used in not tropical climate
regions, and a
be used in not tropical climate
regions, and a
ppropriate
wording provided as follows
See copy of marking plate.
N/A
Annex S
(informativ
e)
e)
Added annex S:
Illustration relative to safety explanation in
normative Chinese、Tibetan、Mongolian、Zhuang
Language and Uighur.
Illustration relative to safety explanation in
normative Chinese、Tibetan、Mongolian、Zhuang
Language and Uighur.
Language of relative to safety:
Chinese.
Chinese.
N/A
Page 6 of 6
Report No.: 232174
ATTACHMENT 6
Clause
Requirement + Test
Result - Remark
Verdict
TRF No. IEC60065K
Annex J.6 After the first paragraph, added a paragraph:
For apparatus intended to be operated at altitudes
between 2 000m and 5 000m, the Minimum
CLEARANCES in table J.2 shall multiply with
multiplication factor 1.48 in table A.2 of GB/T
16935.1. For apparatus intended to be operated at
altitude more than 5 000m, Minimum
CLEARANCES shall multiply with corresponding
multiplication factor in table A.2 of GB/T 16935.1.
between 2 000m and 5 000m, the Minimum
CLEARANCES in table J.2 shall multiply with
multiplication factor 1.48 in table A.2 of GB/T
16935.1. For apparatus intended to be operated at
altitude more than 5 000m, Minimum
CLEARANCES shall multiply with corresponding
multiplication factor in table A.2 of GB/T 16935.1.
The apparatus intended to
be operated at altitudes up to
2 000m.
be operated at altitudes up to
2 000m.
N/A
Delete note 3 of table J.6.
Noted
Annex R
(normativ
e)
(normativ
e)
Added annex R:
Instructions for the new safety warning labels.
R.1 Altitude warning label
Instructions for the new safety warning labels.
R.1 Altitude warning label
Meaning of the label: Evaluation for apparatus only
based on altitude not exceeding 2000m, therefor it’s
the only operating condition applied for the
equipment .There may be some potential safety
hazard if the equipment is used at altitude above
2000m .
R.2 Climate warning label
based on altitude not exceeding 2000m, therefor it’s
the only operating condition applied for the
equipment .There may be some potential safety
hazard if the equipment is used at altitude above
2000m .
R.2 Climate warning label
Meaning of the label: Evaluation for apparatus only
based on temperate climate condition, therefor it’s
the only operating condition applied for the
equipment .There may be some potential safety
hazard if the equipment is used in tropical climate
region.
based on temperate climate condition, therefor it’s
the only operating condition applied for the
equipment .There may be some potential safety
hazard if the equipment is used in tropical climate
region.
The apparatus intended to
be operated at altitudes up to
2 000m, and a
be operated at altitudes up to
2 000m, and a
ppropriate
wording provided as follows,
See copy of marking plate
The apparatus intended to
be used in not tropical climate
regions, and a
be used in not tropical climate
regions, and a
ppropriate
wording provided as follows
See copy of marking plate.
N/A
Annex S
(informativ
e)
e)
Added annex S:
Illustration relative to safety explanation in
normative Chinese、Tibetan、Mongolian、Zhuang
Language and Uighur.
Illustration relative to safety explanation in
normative Chinese、Tibetan、Mongolian、Zhuang
Language and Uighur.
Language of relative to safety:
Chinese.
Chinese.
N/A
Page 6 of 6
Report No.: 232174
ATTACHMENT 6
Clause
Requirement + Test
Result - Remark
Verdict
TRF No. IEC60065K
Annex J.6 After the first paragraph, added a paragraph:
For apparatus intended to be operated at altitudes
between 2 000m and 5 000m, the Minimum
CLEARANCES in table J.2 shall multiply with
multiplication factor 1.48 in table A.2 of GB/T
16935.1. For apparatus intended to be operated at
altitude more than 5 000m, Minimum
CLEARANCES shall multiply with corresponding
multiplication factor in table A.2 of GB/T 16935.1.
between 2 000m and 5 000m, the Minimum
CLEARANCES in table J.2 shall multiply with
multiplication factor 1.48 in table A.2 of GB/T
16935.1. For apparatus intended to be operated at
altitude more than 5 000m, Minimum
CLEARANCES shall multiply with corresponding
multiplication factor in table A.2 of GB/T 16935.1.
The apparatus intended to
be operated at altitudes up to
2 000m.
be operated at altitudes up to
2 000m.
N/A
Delete note 3 of table J.6.
Noted
Annex R
(normativ
e)
(normativ
e)
Added annex R:
Instructions for the new safety warning labels.
R.1 Altitude warning label
Instructions for the new safety warning labels.
R.1 Altitude warning label
Meaning of the label: Evaluation for apparatus only
based on altitude not exceeding 2000m, therefor it’s
the only operating condition applied for the
equipment .There may be some potential safety
hazard if the equipment is used at altitude above
2000m .
R.2 Climate warning label
based on altitude not exceeding 2000m, therefor it’s
the only operating condition applied for the
equipment .There may be some potential safety
hazard if the equipment is used at altitude above
2000m .
R.2 Climate warning label
Meaning of the label: Evaluation for apparatus only
based on temperate climate condition, therefor it’s
the only operating condition applied for the
equipment .There may be some potential safety
hazard if the equipment is used in tropical climate
region.
based on temperate climate condition, therefor it’s
the only operating condition applied for the
equipment .There may be some potential safety
hazard if the equipment is used in tropical climate
region.
The apparatus intended to
be operated at altitudes up to
2 000m, and a
be operated at altitudes up to
2 000m, and a
ppropriate
wording provided as follows,
See copy of marking plate
The apparatus intended to
be used in not tropical climate
regions, and a
be used in not tropical climate
regions, and a
ppropriate
wording provided as follows
See copy of marking plate.
N/A
Annex S
(informativ
e)
e)
Added annex S:
Illustration relative to safety explanation in
normative Chinese、Tibetan、Mongolian、Zhuang
Language and Uighur.
Illustration relative to safety explanation in
normative Chinese、Tibetan、Mongolian、Zhuang
Language and Uighur.
Language of relative to safety:
Chinese.
Chinese.
N/A