Harman Kardon AVR 1550 (serv.man4) User Manual / Operation Manual ▷ View online
AVR 1550 Audio/VideoReceiver
OWNER’S MANUAL
Power for the Digital Revolution
™
®
2 TABLE OF CONTENTS
3 Introduction
4 Safety Information
4
4 Safety Information
4
Unpacking
5 Front Panel Controls
7 Front Panel Information Display
8 Rear Panel Connections
9 Remote Control Functions
7 Front Panel Information Display
8 Rear Panel Connections
9 Remote Control Functions
11 Installation and Connections
11
11
Audio Equipment Connections
11
Video Equipment Connections
12
SCART A/V Connections
13
Speaker Selection and Placement
14 System Configuration
14
14
First Turn On
14
Settings to be Made
With Each Input Used
With Each Input Used
14
Input Setup
14
Speaker Setup
14
Surround Setup
16
Making Settings independent of
selected Input
selected Input
16
Delay Settings
17
Night Mode Settings
17
Output Level Adjustment
19 Operation
19
19
Basic Operation
19
Source Selection
19
Controls and Use of Headphones
20
Surround Mode Chart
21
Surround Mode Selection
21
Digital Audio Playback
22
Selecting a Digital Source
22
Digital Status Indicators
22
Night Mode
23
Tape Recording
23
Output Level Trim Adjustment
23
Display Brigthness
23
Memory Backup
24
Tuner Operation
24
RDS Operation
26 Function List
27 Troubleshooting Guide
27
27 Troubleshooting Guide
27
Processor Reset
28 Technical Specifications
Table of Contents
Typographical Conventions
In order to help you use this manual with the remote control, front-panel controls and rear-panel
connections, certain conventions have been used.
In order to help you use this manual with the remote control, front-panel controls and rear-panel
connections, certain conventions have been used.
EXAMPLE – (bold type) indicates a specific remote control or front-panel button, or rear-panel
connection jack
connection jack
EXAMPLE
– (OCR type) indicates a message that is visible on the front-panel information display
1
– (number in a square) indicates a specific front-panel control
– (number in a circle) indicates a rear-panel connection
0 – (number in an oval) indicates a button or indicator on the remote
0 – (number in an oval) indicates a button or indicator on the remote
A
– (letter in a square) indicates an indicator in the front-panel display
Declaration of Conformity
We, Harman Consumer International
2, route de Tours
72500 Château-du-Loir,
FRANCE
72500 Château-du-Loir,
FRANCE
declare in own responsibility, that the product described
in this owner’s manual is in compliance with technical
standards:
in this owner’s manual is in compliance with technical
standards:
EN 55013/6.1990
EN 55020/12.1994
EN 60065:1993
EN 61000-3-2/4.1995
Carsten Olesen
Harman Kardon Europe A/S
09/02
INTRODUCTION 3
Introduction
Thank you for choosing Harman Kardon!
With the purchase of a Harman Kardon
AVR 1550 you are about to begin many years of
listening enjoyment. The AVR 1550 has been
custom designed to provide all the excitement
and detail of movie sound tracks and every
nuance of musical selections. With onboard
Dolby* Digital and DTS
With the purchase of a Harman Kardon
AVR 1550 you are about to begin many years of
listening enjoyment. The AVR 1550 has been
custom designed to provide all the excitement
and detail of movie sound tracks and every
nuance of musical selections. With onboard
Dolby* Digital and DTS
†
decoding, the AVR 1550
delivers six discrete channels of audio that take
advantage of the digital sound tracks from the
latest DVD and LD releases and Digital Television
broadcasts.
advantage of the digital sound tracks from the
latest DVD and LD releases and Digital Television
broadcasts.
To obtain the maximum enjoyment from your
new receiver, we urge you to take the time to
read through this manual. This will ensure that
connections to speakers, source playback units
and other external devices are made properly. In
addition, a few minutes spent learning the func-
tions of the various controls will enable you to
take advantage of all the power the AVR 1550
is able to deliver.
new receiver, we urge you to take the time to
read through this manual. This will ensure that
connections to speakers, source playback units
and other external devices are made properly. In
addition, a few minutes spent learning the func-
tions of the various controls will enable you to
take advantage of all the power the AVR 1550
is able to deliver.
If you have any questions about this product, its
installation or its operation, please contact your
dealer. He is your best local source of informa-
tion.
installation or its operation, please contact your
dealer. He is your best local source of informa-
tion.
Description and Features
The AVR 1550 is among the most versatile and
multi-featured A/V receivers available, incorpo-
rating a wide range of listening options. In addi-
tion to Dolby Digital and DTS decoding for digi-
tal sources, a broad choice of analog surround
modes are available for use with sources such
as CD, VCR, TV broadcasts and the AVR’s own
FM/AM tuner.
The AVR 1550 is among the most versatile and
multi-featured A/V receivers available, incorpo-
rating a wide range of listening options. In addi-
tion to Dolby Digital and DTS decoding for digi-
tal sources, a broad choice of analog surround
modes are available for use with sources such
as CD, VCR, TV broadcasts and the AVR’s own
FM/AM tuner.
In addition to providing a wide range of listening
options, the AVR 1550 is easy to configure so
that it provides the best results with your
speakers and specific listening-room
environment.
options, the AVR 1550 is easy to configure so
that it provides the best results with your
speakers and specific listening-room
environment.
For the ultimate in flexibility, the AVR 1550
features connections for three video devices,
partially with both composite and S-Video
inputs.
Two additional audio inputs are available, and a
total of two digital inputs make the AVR 1550
capable of handling all the latest digital audio
sources. A coax digital output is available for
direct connection to digital recorders.
features connections for three video devices,
partially with both composite and S-Video
inputs.
Two additional audio inputs are available, and a
total of two digital inputs make the AVR 1550
capable of handling all the latest digital audio
sources. A coax digital output is available for
direct connection to digital recorders.
The AVR 1550’s powerful amplifier uses
traditional Harman Kardon high-current design
technologies to meet the wide dynamic range of
any program selection.
traditional Harman Kardon high-current design
technologies to meet the wide dynamic range of
any program selection.
Harman Kardon invented the high-fidelity receiv-
er more than forty-seven years ago. With state-
of-the-art circuitry and time-honored circuit
designs, the AVR 1550 is one of the finest
receivers ever offered by Harman Kardon within
its price range.
er more than forty-seven years ago. With state-
of-the-art circuitry and time-honored circuit
designs, the AVR 1550 is one of the finest
receivers ever offered by Harman Kardon within
its price range.
■ Onboard Dolby Digital and DTS
Decoding Using Crystal
®
Chip
Technology
■ Dolby Laboratory's latest ProLogic II
decoding technology
■ Multiple Digital Inputs and Outputs
■ Front-Panel Inputs for Easy Connection
to Portable Devices and the Latest
Video Game Consoles
Video Game Consoles
4 SAFETY INFORMATION
Safety Information
Important Safety Information
Verify Line Voltage Before Use
Your AVR 1550 has been designed for use with
220-240-Volt AC current. Connection to a line
voltage other than that for which it is intended
can create a safety and fire hazard and may
damage the unit.
Your AVR 1550 has been designed for use with
220-240-Volt AC current. Connection to a line
voltage other than that for which it is intended
can create a safety and fire hazard and may
damage the unit.
If you have any questions about the voltage
requirements for your specific model, or about
the line voltage in your area, contact your dealer
before plugging the unit into a wall outlet.
requirements for your specific model, or about
the line voltage in your area, contact your dealer
before plugging the unit into a wall outlet.
Do Not Use Extension Cords
To avoid safety hazards, use only the power cord
attached to your unit. We do not recommend
that extension cords be used with this product.
As with all electrical devices, do not run power
cords under rugs or carpets or place heavy
objects on them. Damaged power cords should
be replaced immediately by an authorized
service depot with a cord meeting factory
specifications.
To avoid safety hazards, use only the power cord
attached to your unit. We do not recommend
that extension cords be used with this product.
As with all electrical devices, do not run power
cords under rugs or carpets or place heavy
objects on them. Damaged power cords should
be replaced immediately by an authorized
service depot with a cord meeting factory
specifications.
Handle the AC Power Cord Gently
When disconnecting the power cord from an AC
outlet, always pull the plug, never pull the cord.
If you do not intend to use the unit for any con-
siderable length of time, disconnect the plug
from the AC outlet.
When disconnecting the power cord from an AC
outlet, always pull the plug, never pull the cord.
If you do not intend to use the unit for any con-
siderable length of time, disconnect the plug
from the AC outlet.
Do Not Open the Cabinet
There are no user-serviceable components inside
this product. Opening the cabinet may present a
shock hazard, and any modification to the
product will void your guarantee. If water or any
metal object such as a paper clip, wire or a
staple accidentally falls inside the unit,
disconnect it from the AC power source
immediately, and consult an authorized service
station.
There are no user-serviceable components inside
this product. Opening the cabinet may present a
shock hazard, and any modification to the
product will void your guarantee. If water or any
metal object such as a paper clip, wire or a
staple accidentally falls inside the unit,
disconnect it from the AC power source
immediately, and consult an authorized service
station.
Installation Location
■ To assure proper operation and to avoid the
■ To assure proper operation and to avoid the
potential for safety hazards, place the unit on
a firm and level surface. When placing the
unit on a shelf, be certain that the shelf and
any mounting hardware can support the
weight of the product.
a firm and level surface. When placing the
unit on a shelf, be certain that the shelf and
any mounting hardware can support the
weight of the product.
■ Make certain that proper space is provided
both above and below the unit for ventilation.
If this product will be installed in a cabinet or
other enclosed area, make certain that there
is sufficient air movement within the cabinet.
Under some circumstances a fan may be
required.
If this product will be installed in a cabinet or
other enclosed area, make certain that there
is sufficient air movement within the cabinet.
Under some circumstances a fan may be
required.
■ Do not place the unit directly on a carpeted
surface.
■ Avoid installation in extremely hot or cold
locations, or an area that is exposed to direct
sunlight or heating equipment.
sunlight or heating equipment.
■ Avoid moist or humid locations.
■ Do not obstruct the ventilation slots on the
top of the unit, or place objects directly over
them.
them.
Cleaning
When the unit gets dirty, wipe it with a clean,
soft, dry cloth. If necessary, wipe it with a soft
cloth dampened with mild soapy water, then a
fresh cloth with clean water. Wipe dry
immediately with a dry cloth. NEVER use
benzene, aerosol cleaners, thinner, alcohol or any
other volatile cleaning agent. Do not use
abrasive cleaners, as they may damage the finish
of metal parts. Avoid spraying insecticide near
the unit.
When the unit gets dirty, wipe it with a clean,
soft, dry cloth. If necessary, wipe it with a soft
cloth dampened with mild soapy water, then a
fresh cloth with clean water. Wipe dry
immediately with a dry cloth. NEVER use
benzene, aerosol cleaners, thinner, alcohol or any
other volatile cleaning agent. Do not use
abrasive cleaners, as they may damage the finish
of metal parts. Avoid spraying insecticide near
the unit.
Moving the Unit
Before moving the unit, be certain to disconnect
any interconnection cords with other
components, and make certain that you
disconnect the unit from the AC outlet.
Before moving the unit, be certain to disconnect
any interconnection cords with other
components, and make certain that you
disconnect the unit from the AC outlet.
Unpacking
The carton and shipping materials used to
protect your new receiver during shipment were
specially designed to cushion it from shock and
vibration. We suggest that you save the carton
and packing materials for use in shipping if you
move, or should the unit ever need repair.
protect your new receiver during shipment were
specially designed to cushion it from shock and
vibration. We suggest that you save the carton
and packing materials for use in shipping if you
move, or should the unit ever need repair.
To minimize the size of the carton in storage,
you may wish to flatten it. This is done by
carefully slitting the tape seams on the bottom
and collapsing the carton. Other cardboard
inserts may be stored in the same manner.
Packing materials that cannot be collapsed
should be saved along with the carton in a
plastic bag.
you may wish to flatten it. This is done by
carefully slitting the tape seams on the bottom
and collapsing the carton. Other cardboard
inserts may be stored in the same manner.
Packing materials that cannot be collapsed
should be saved along with the carton in a
plastic bag.
If you do not wish to save the packaging
materials, please note that the carton and other
sections of the shipping protection are
recyclable. Please respect the environment and
discard those materials at a local recycling
center.
materials, please note that the carton and other
sections of the shipping protection are
recyclable. Please respect the environment and
discard those materials at a local recycling
center.
