Harman Kardon AVR 151 Service Manual ▷ View online
29
ENGLISH
AVR
System Settings
The AVR’s System Settings menu lets you customize in what way many of the AVR’s
features operate. Press the OSD/Menu button and navigate to the System line. Press the
OK button to display the System Settings menu.
features operate. Press the OSD/Menu button and navigate to the System line. Press the
OK button to display the System Settings menu.
Panel Timeout: This setting allows you to set the AVR’s front-panel display to automatically
turn off after remaining on for a predertimined time (3 – 10 seconds) each time you use
a control. Set this to “Off” to have the display remain on continually.
turn off after remaining on for a predertimined time (3 – 10 seconds) each time you use
a control. Set this to “Off” to have the display remain on continually.
Auto Power Off: This setting allows you to set the AVR to automatically switch to the Off
mode after being in the Sleep mode for a predetermined time (1 – 8 hours) and switch
to the Sleep mode after this amount of time if a source with an analog audio input or
internal source (FM, AM, USB, iPod, Home Network, vTuner or DMR) is active. See Power
Indicator/Power Button, on page 5, for more information.
mode after being in the Sleep mode for a predetermined time (1 – 8 hours) and switch
to the Sleep mode after this amount of time if a source with an analog audio input or
internal source (FM, AM, USB, iPod, Home Network, vTuner or DMR) is active. See Power
Indicator/Power Button, on page 5, for more information.
Menu Timeout: This setting allows you to set the amount of time (20 – 50 seconds) a
menu screen will remain on after the last adjustment. Set this to “Off” to have the menus
remain on continually until you press the OSD/Menu button.
menu screen will remain on after the last adjustment. Set this to “Off” to have the menus
remain on continually until you press the OSD/Menu button.
Status Message: When the AVR is turned on, the volume is adjusted, the source is
changed or a change in the input signal is detected, a status message will be displayed
on the TV screen. Select how long the message remains visible, from 2 to 10 seconds,
with a default of 3 seconds. Select “Off” if you do not wish to see the status messages on
the TV screen (they will still appear on the AVR’s front-panel message display).
changed or a change in the input signal is detected, a status message will be displayed
on the TV screen. Select how long the message remains visible, from 2 to 10 seconds,
with a default of 3 seconds. Select “Off” if you do not wish to see the status messages on
the TV screen (they will still appear on the AVR’s front-panel message display).
Volume Default and Default Volume Setting: These two settings are used together to
program the volume level when you turn on the AVR. Set Volume Default to On, and then
set the Default Volume Setting to the desired turn-on volume. When Volume Default is
set to Off, the AVR will turn on at the last-used volume setting from the previous listening
session.
program the volume level when you turn on the AVR. Set Volume Default to On, and then
set the Default Volume Setting to the desired turn-on volume. When Volume Default is
set to Off, the AVR will turn on at the last-used volume setting from the previous listening
session.
HDMI Audio to TV: This setting determines whether HDMI audio signals are passed
through the HDMI Monitor Out connector to the video display. In normal operation, leave
this setting at Off, as audio will be played through the AVR. To use the TV by itself, without
the home theater system, turn this setting to On. In this case you will need to mute the
TV’s speakers (or switch the setting to Off) when using the AVR for audio.
through the HDMI Monitor Out connector to the video display. In normal operation, leave
this setting at Off, as audio will be played through the AVR. To use the TV by itself, without
the home theater system, turn this setting to On. In this case you will need to mute the
TV’s speakers (or switch the setting to Off) when using the AVR for audio.
HDMI Link: This setting allows the communication of control information among the
HDMI devices in your system. Turn this setting to On to allow control communication
between the HDMI devices; turn the setting to Off to forbid control communication. When
this setting is set to Off, the TV source audio input is set to Optical. When this setting is
set to On, the TV source audio input is set to HDMI ARC.
HDMI devices in your system. Turn this setting to On to allow control communication
between the HDMI devices; turn the setting to Off to forbid control communication. When
this setting is set to Off, the TV source audio input is set to Optical. When this setting is
set to On, the TV source audio input is set to HDMI ARC.
Software Update: If a software upgrade is released for your AVR, installation instructions
will be available in the Product Support section of the Web site or from Harman Kardon
customer service. At that time, you may use this submenu to install the upgrade
software.
will be available in the Product Support section of the Web site or from Harman Kardon
customer service. At that time, you may use this submenu to install the upgrade
software.
IMPORTANT: During a software upgrade, do not power off the AVR or use any of its
controls. Doing so could permanently damage the AVR.
controls. Doing so could permanently damage the AVR.
Sleep Timer
The sleep timer sets the AVR to play for up to 90 minutes and then turn off
automatically.
automatically.
Press the Sleep button on the remote, and the time until turn-off will be displayed. Each
additional press of the Sleep button decreases the play time by 10 minutes, from 90 to
10 minutes. The SLEEP OFF setting disables the sleep timer.
additional press of the Sleep button decreases the play time by 10 minutes, from 90 to
10 minutes. The SLEEP OFF setting disables the sleep timer.
When the sleep timer has been set, the front-panel display will automatically dim to half
brightness.
brightness.
If you press the Sleep button after the timer has been set, the remaining play time will be
displayed. Press the Sleep button again to change the play time.
displayed. Press the Sleep button again to change the play time.
Processor Reset
If the AVR behaves erratically after a power surge, unplug the AC power cord for at least
3 minutes. Plug the cord back in and turn the AVR on. If this procedure doesn’t help, reset
the AVR’s processor as described below.
3 minutes. Plug the cord back in and turn the AVR on. If this procedure doesn’t help, reset
the AVR’s processor as described below.
NOTE: A processor reset erases all user configurations, including speaker and level
settings, and tuner presets. After a reset, reenter all of these settings from your entries
in the Appendix worksheets.
settings, and tuner presets. After a reset, reenter all of these settings from your entries
in the Appendix worksheets.
To reset the AVR’s processor:
1. Press the front-panel Standby/On switch for more than three seconds to turn the AVR
off (the Power Indicator will turn amber).
2. Press and hold the front-panel Surround Modes button for at least 5 seconds until the
RESET message appears on the front-panel Message Display.
NOTE: After performing a processor reset, wait at least 1 minute before pressing any
Source Selector buttons.
Source Selector buttons.
If the AVR does not function correctly after a processor reset, contact an authorized
Harman Kardon service center for assistance. Authorized service centers may be located
by visiting our Web site at www.harmankardon.com.
Harman Kardon service center for assistance. Authorized service centers may be located
by visiting our Web site at www.harmankardon.com.
System Settings
Harman Kardon
AVR 151 Service Manual
Page 9 of 131
33
ENGLISH
AVR
Troubleshooting
Symptom
Cause
Solution
2JEP@KAOJKPBQJ?PEKJ
+K LKSAN
"JOQNAPD=PPDALKSAN?KN@EOLHQCCA@EJPK=HERA
LKSANKQPHAP
DA?GEBPDA KQPHAPEOOSEP?D?KJPNKHHA@
#NKJPL=JAH@EOLH=UHECDPO
>QPPDANAOJKOKQJ@KN
LE?PQNA
&JPANIEPPAJPEJLQP?KJJA?PEKJ
*QPAEOKJ
3KHQIA?KJPNKHEOPQNJA@@KSJ
*QPAEOKJ
3KHQIA?KJPNKHEOPQNJA@@KSJ
0A?QNA=HHEJLQP=J@OLA=GAN?KJJA?PEKJO
-NAOO*QPA>QPPKJ
1QNJQL3KHQIA?KJPNKH
-NAOO*QPA>QPPKJ
1QNJQL3KHQIA?KJPNKH
+KOKQJ@BNKI=JUOLA=GAN
ILHEłANEOEJLNKPA?PEKJIK@A@QAPKLKOOE>HAODKNP
?EN?QEP
ILHEłANEOEJLNKPA?PEKJIK@A@QAPKEJPANJ=H
LNK>HAIO
DA?G=HHOLA=GANSENAO=POLA=GAN=J@3/
?KJJA?PEKJOBKN?NKOOA@SENAO
KJP=?PUKQNHK?=H%=NI=J(=N@KJOANRE?A?AJPAN
+KOKQJ@BNKI?AJPANKNOQNNKQJ@OLA=GANO
&J?KNNA?POQNNKQJ@IK@A
-NKCN=II=PANE=HEOIKJKLDKJE?
&J?KNNA?POLA=GAN?KJłCQN=PEKJ
-NKCN=II=PANE=HEOOPANAK
-NKCN=II=PANE=HEOIKJKLDKJE?
&J?KNNA?POLA=GAN?KJłCQN=PEKJ
-NKCN=II=PANE=HEOOPANAK
0AHA?P=OQNNKQJ@IK@AKPDANPD=JOPANAK
*KJKLNKCN=IO?KJP=EJJKOQNNKQJ@EJBKNI=PEKJ
DA?GPDAOLA=GAN?KJłCQN=PEKJEJPDAOAPQLIAJQ
1DAOQNNKQJ@@A?K@ANI=UJKP?NA=PA?AJPANKN
*KJKLNKCN=IO?KJP=EJJKOQNNKQJ@EJBKNI=PEKJ
DA?GPDAOLA=GAN?KJłCQN=PEKJEJPDAOAPQLIAJQ
1DAOQNNKQJ@@A?K@ANI=UJKP?NA=PA?AJPANKN
OQNNKQJ@?D=JJAHEJBKNI=PEKJBNKIJKJAJ?K@A@
LNKCN=IO
2JEP@KAOJKPNAOLKJ@PKNAIKPA?KJPNKH?KII=J@O
4A=G>=PPANEAOEJNAIKPA
/AIKPAOAJOKNEOK>O?QNA@
/AIKPAOAJOKNEOK>O?QNA@
D=JCA>=PPANEAOEJNAIKPA
"JOQNAPD=PPDA3/OBNKJPL=JAHNAIKPAOAJOKNEOEJ
"JOQNAPD=PPDA3/OBNKJPL=JAHNAIKPAOAJOKNEOEJ
PDAHEJAKBOECDPKBPDANAIKPA
&JPANIEPPAJP>QVVEJCEJPQJAN
)K?=HEJPANBANAJ?A
*KRAPDA3/KN=JPAJJ==S=UBNKI?KILQPANO
ŃQKNAO?AJPHECDPO
IKPKNOKNKPDANAHA?PNE?=H=LLHE=J?AO
2J=>HAPK=?PER=PANAIKPA?KJPNKH-NKCN=IIEJCIK@A 0KQN?A0AHA?PKN>QPPKJEOJKPDAH@BKN=PHA=OP
OA?KJ@O
AOQNAPKDKH@PDA0KQN?A0AHA?PKN>QPPKJBKN=PHA=OP
OA?KJ@O
2J=>HAPKAOP=>HEODJAPSKNG?KJJA?PEKJ
3/JAPSKNGLNKCN=IIEJCNAMQENAONA>KKPEJC
U?HAPDA3/EJPKPDA,BBIK@A
=J@PDAJPQNJEPKJ
=C=EJ
@@EPEKJ=HEJBKNI=PEKJKJPNKQ>HAODKKPEJCLKOOE>HALNK>HAIOSEPDUKQN3/=J@EJOP=HH=PEKJNAH=PA@EOOQAOI=U>ABKQJ@EJPDAHEOPKBļ#[email protected]
SDE?DEO
HK?=PA@EJPDA-NK@Q?P0QLLKNPOA?PEKJKBKQN4A>OEPAġSSSD=NI=JG=N@KJ?KI
Harman Kardon
AVR 151 Service Manual
Page 10 of 131
34
AVR
Specifications
Specifications
Audio Section
0PANAKLKSANġ
4LAN?D=JJAH
PSK?D=JJAHO@NERAJĤ
KDIO
G%V
ģ1%!
*QHPE?D=JJAHLKSANġ
4LAN?D=JJAH
PSK?D=JJAHO@NERAJĤ
KDIO
G%V
ģ1%!
&JLQPOAJOEPEREPUEILA@=J?Aġ
I3GKDIO
0ECJ=HPKJKEOAN=PEKĠ&%#
ġ
100dB
0QNNKQJ@OUOPAI=@F=?AJP?D=JJAH
OAL=N=PEKJġ
!KH>U-NK)KCE?!-)&&ġ@
!KH>U!ECEP=Hġ@
DTS: 55dB
#NAMQAJ?UNAOLKJOAĠĤ4
ġ
%VG%VĠ@@
%ECDEJOP=JP=JAKQO?QNNAJP
?=L=>EHEPUĠ%
ġ
a=ILO
1N=JOEAJPEJPANIK@QH=PEKJ
@EOPKNPEKJĠ1&*
ġ
2JIA=OQN=>HA
0HASN=PAġ
3įOA?
FM Tuner Section
#NAMQAJ?UN=JCAġ
*%V
2O=>HAOAJOEPEREPU&%#ġ
į3@B
0ECJ=HPKJKEOAN=PEKĠIKJKOPANAK
ġ 70dB/68dB
!EOPKNPEKJĠIKJKOPANAK
ġ
0PANAKOAL=N=PEKJġ
@ĤG%V
0AHA?PEREPUĠaG%V
ġ
70dB
&I=CANAFA?PEKJġ
80dB
&#NAFA?PEKJġ
80dB
AM Tuner Section
#NAMQAJ?UN=JCAġ
G%VĠ3/
G%VĠ3/
0ECJ=HPKJKEOAN=PEKġ
38dB
2O=>HAOAJOEPEREPUĠHKKL
ġ
500μV
!EOPKNPEKJĠG%V
IK@
ġ
0AHA?PEREPUĠaG%V
ġ
30dB
Video Section
1AHAREOEKJBKNI=Pġ
+10 Ġ3/
Ģ
PAL (AVR 151)
&JLQPHARAHEILA@=J?Aġ
3LLKDIO
,QPLQPHARAHEILA@=J?Aġ
3LLKDIO
3E@AKBNAMQAJ?UNAOLKJOAĠ?KILKOEPA
video):
%V*%VĠ@
HDMI:
%!*&
General Specifications
-KSANNAMQENAIAJPġ
3 %VĠ3/
Ģ
33 %V%VĠ3/
-KSAN?KJOQILPEKJġ
ģ4ĠOP=J@>U
Ģ
4I=TEIQI
!EIAJOEKJOĠ4T%T!
ġ
ğTğTğ
ĠIITIITII
4AECDP
H>ĠGC
!ALPDIA=OQNAIAJPEJ?HQ@AOGJK>O
>QPPKJO=J@PANIEJ=H?KJJA?PEKJO
%AECDPIA=OQNAIAJPEJ?HQ@AOBAAP=J@?D=OOEO
Harman Kardon
AVR 151 Service Manual
Page 11 of 131
2. Package Drawing
AVR151/230
MANUAL ASS'Y
BOX,OUT CARTON
3
4
1
DESCRIPTION
NO
CPS1A930
CQXAVR151/230
CPG1A972W
1
1
Q,ty
PARTS NO.
CPS1A931
PAD,RIGHT
2
1
PAD,LEFT
SET
AVR151/230SET
1
5
1
POLY BAG
NO
DESCRIPTION
PARTS NO.
Q,ty
1
2
3
4
5
6
7
1
1
CPB1A190Z
POLY BAG
1. Instruction manual ass'y - Accessories(CQXAVR151/230)
SHEET,QUICK START GUIDE
8
CQE1A570Z
1
CABR03PPB
CSA1A039Z
ANT, AM LOOP(9.5uH/5T)
BATTERY
1
2
FM 1 POL ANT
CSA1A018Z
1
2
BATTERY ASS'Y
4
9
3
AM LOOP ANTENNA ASS'Y
6
FM 1 POLE ANT(UL)
7
8
5
1
9
SNOW PAD (R)
4
BOX ,OUT CARTON
6
SET
5
SNOW PAD (L)
3
MANUAL ASS'Y
1
CJA2B120Z
1
CORD,POWER(PLUG+SOCKET)
SHEET,SAFETY
CQE1A601Z
1
TRANSMITTER ASS'Y
REMOCON
REMOCON ASS'Y
CARTAVR151-HK
1
SHEET,QUICK START GUIDE
STAPLE
CPL0905
3
STAPLE
SHEET,SAFETY
CORD , POWER(EUR)
Harman Kardon
AVR 151 Service Manual
Page 12 of 131
Click on the first or last page to see other AVR 151 service manuals if exist.