Harman Kardon AVR 151 (serv.man5) EMC - CB Certificate ▷ View online
Test Report issued under the responsibility of
www.nemko.com
This Test Report, when bearing the Nemko name and logo is only valid when issued by a Nemko laboratory,
or by a laboratory having special agreement with Nemko.
or by a laboratory having special agreement with Nemko.
TEST REPORT
IEC 60065
Audio, video and similar electronic apparatus - Safety requirements
Report Number. .............................. :
232173
Date of issue .................................. :
2013-02-25
Total number of pages .................. :
50 pages and refer to page 4
Applicant’s name ........................... : Anam Electronics Co., Ltd.
Address .......................................... :
645,Sungkok-Dong, Danwon-Gu, Ansan-City,
Gyeonggi-Do, Korea
Gyeonggi-Do, Korea
Test specification:
Standard ......................................... :
IEC 60065:2001 (Seventh Edition) + am1:2005 + am2:2010
Test procedure ............................... : CB Scheme
Non-standard test method ............ : N/A
Test Report Form No. .................... :
IEC60065K
Test Report Form(s) Originator ................... :
Intertek Semko AB
Master TRF .................................................... :
Dated 2010-10
Copyright © 2010 Worldwide System for Conformity Testing and Certification of Electrotechnical
Equipment and Components (IECEE), Geneva, Switzerland. All rights reserved.
Equipment and Components (IECEE), Geneva, Switzerland. All rights reserved.
This publication may be reproduced in whole or in part for non-commercial purposes as long as the IECEE is acknowledged as
copyright owner and source of the material. IECEE takes no responsibility for and will not assume liability for damages resulting from
the reader's interpretation of the reproduced material due to its placement and context.
copyright owner and source of the material. IECEE takes no responsibility for and will not assume liability for damages resulting from
the reader's interpretation of the reproduced material due to its placement and context.
If this Test Report Form is used by non-IECEE members, the IECEE/IEC logo and the reference to the CB
Scheme procedure shall be removed.
Scheme procedure shall be removed.
This report is not valid as a CB Test Report unless signed by an approved CB Testing Laboratory and
appended to a CB Test Certificate issued by an NCB in accordance with IECEE 02.
appended to a CB Test Certificate issued by an NCB in accordance with IECEE 02.
Page 2 of 50
Report No.: 232173
TRF No. IEC60065K
Test item description ..................... : A/V Surround Receiver
Trade Mark ...................................... :
Manufacturer .................................. : Harman International Industries, Incorporated.
8500 Balboa Blvd, Northridge, CA 91329, UNITED STATES
Model/Type reference .................... : AVR 151/230, AVR 151/230C
Ratings ............................................ : 210W, 220-240V~, 50/60Hz, Class II
Page 4 of 50
Report No.: 232173
TRF No. IEC60065K
List of Attachments (including a total number of pages in each attachment):
Attachment 1: Schematic Diagram / PCB Layout - Major part only (3 pages)
Attachment 2: Transformer Information (11 pages)
Attachment 3: Photos (7 pages)
Attachment 4:
Attachment 1: Schematic Diagram / PCB Layout - Major part only (3 pages)
Attachment 2: Transformer Information (11 pages)
Attachment 3: Photos (7 pages)
Attachment 4:
European group differences
(16 pages)
Attachment 5: National deviations for Singapore (5 pages)
Attachment 6: National deviations for China (6 pages) *)
*) The last modified date indicates the last time the standard reference / attachment for this standard
was modified. The last modified date is the information was imported into the online CB Bulletin from
the previous version.
Attachment 6: National deviations for China (6 pages) *)
*) The last modified date indicates the last time the standard reference / attachment for this standard
was modified. The last modified date is the information was imported into the online CB Bulletin from
the previous version.
Summary of testing:
Instructions
(Clause 5.4)
(Clause 5.4)
Instructions / user`s manual is in English and
Chinese. The information shall also be given in a
language acceptable to the country where the
apparatus in intended to be sold.
Chinese. The information shall also be given in a
language acceptable to the country where the
apparatus in intended to be sold.
Input / Temperature rise measurements
(Clause 7.1)
(Clause 7.1)
The apparatus has two modes in supplying voltage
from TF93 transformer for amplifier circuit. The one
is “HIGH mode” of 39 V, and the other is “LOW mode”
of 21.5 V, which is controlled by the IC1405 thermal
sensor IC on HS93 heat-sink in power supply board.
The apparatus is always be started from “HIGH mode”
first, and then changed to “LOW mode” electrically by
operation of the IC1405 thermal sensor IC when the
temperature of the HS93 heat-sink is exceeding 65°C.
The IC1405 thermal sensor IC is UL approved
component according to UL60730-1 and accepted
this component in their position due to comparison
with similar standard IEC60730-1 where there is no
different requirements. However, please note that the
certificate may be waived by other agency.
from TF93 transformer for amplifier circuit. The one
is “HIGH mode” of 39 V, and the other is “LOW mode”
of 21.5 V, which is controlled by the IC1405 thermal
sensor IC on HS93 heat-sink in power supply board.
The apparatus is always be started from “HIGH mode”
first, and then changed to “LOW mode” electrically by
operation of the IC1405 thermal sensor IC when the
temperature of the HS93 heat-sink is exceeding 65°C.
The IC1405 thermal sensor IC is UL approved
component according to UL60730-1 and accepted
this component in their position due to comparison
with similar standard IEC60730-1 where there is no
different requirements. However, please note that the
certificate may be waived by other agency.
Terminal and External flexible cords:
(Clause 15 and 16)
(Clause 15 and 16)
This test report does not cover the mains cord set
except for listed type in list of critical components.
Must be supplied with an approved cord set
suitable for the countries where the requirement
will be sold.
except for listed type in list of critical components.
Must be supplied with an approved cord set
suitable for the countries where the requirement
will be sold.
Tests performed (name of test and test clause):
5 Marking and instructions
7 Heating under normal operating conditions
8 Constructional requirements with regard to the
5 Marking and instructions
7 Heating under normal operating conditions
8 Constructional requirements with regard to the
protection against electric shock
9 Electric shock hazard under normal operating
conditions
10 Insulation requirements
11 Fault conditions
12 Mechanical strength
13 Clearances and creepage distances
14 Components
17 Electrical connections and mechanical fixings
19. Stability and mechanical hazards
conditions
10 Insulation requirements
11 Fault conditions
12 Mechanical strength
13 Clearances and creepage distances
14 Components
17 Electrical connections and mechanical fixings
19. Stability and mechanical hazards
Testing location:
Refer to page 3
Refer to page 3
Click on the first or last page to see other AVR 151 (serv.man5) service manuals if exist.