Harman Kardon AVR 135 (serv.man2) EMC - CB Certificate ▷ View online
Reference No. : 54120503A Page 2
◀ Anam EMC Test Laboratory ▶
CONTENTS
Page
1. Client Information
4
2. Equipment under test (EUT)
4
2.1. Identification of the EUT
2.2. Additional information about the EUT
2.2. Additional information about the EUT
3. Test specifications
5
3.1. Standard
3.2. Additions, Deviations and Exclusions from standard
3.3. Purpose of the test
3.4. Mode of operation during the test
3.2. Additions, Deviations and Exclusions from standard
3.3. Purpose of the test
3.4. Mode of operation during the test
4. Test summary
5
5. Mains terminal disturbance voltage
6
5.1. Operating environment
5.2. Test set-up and procedure
5.3. Measurement uncertainty
5.4. Test instrumentation
5.5. Test protocol
5.2. Test set-up and procedure
5.3. Measurement uncertainty
5.4. Test instrumentation
5.5. Test protocol
6. Disturbance Radiation
8
6.1. Operating environment
6.2. Test set-up and procedure
6.3. Measurement uncertainty
6.4. Test instrumentation
6.5. Test protocol
6.2. Test set-up and procedure
6.3. Measurement uncertainty
6.4. Test instrumentation
6.5. Test protocol
7. Antenna Terminal Disturbance Voltage
11
7.1. Operating environment
7.2. Test set-up and procedure
7.3. Measurement uncertainty
7.4. Test instrumentation
7.5. Test protocol
7.2. Test set-up and procedure
7.3. Measurement uncertainty
7.4. Test instrumentation
7.5. Test protocol
Reference No. : 54120503A Page 3
◀ Anam EMC Test Laboratory ▶
8. Disturbance Power
14
8.1. Operating environment
8.2. Test set-up and procedure
8.3. Measurement uncertainty
8.4. Test instrumentation
8.5. Test protocol
8.2. Test set-up and procedure
8.3. Measurement uncertainty
8.4. Test instrumentation
8.5. Test protocol
9. Harmonics
17
9.1. Operating environment
9.2. Test set-up and procedure
9.3. Test instrumentation
9.4. Test result
9.2. Test set-up and procedure
9.3. Test instrumentation
9.4. Test result
10. Voltage fluctuations-flicker
18
10.1. Operating environment
10.2. Test set-up and procedure
10.3. Test instrumentation
10.4. Test result
10.2. Test set-up and procedure
10.3. Test instrumentation
10.4. Test result
Annex - Measurement data;
Annex A: Mains terminal disturbance voltage (6 Copies)
19
Annex B: Disturbance Power (35 Copies)
25
Annex C: Harmonics (3 Copies)
60
Annex D: Voltage fluctuations-flicker (2 Copies)
63
Reference No. : 54120503A Page 4
◀ Anam EMC Test Laboratory ▶
1.CLIENT INFORMATION
The EUT has been tested by request of:
* Company
: Harman Consumer Group
8500 Balboa Blvd., Northridge, CA 91329, USA
* Contact Person
: Mr. Patrick Zarrabi
* Tel.
: +1-818-895-8161
2.EQUIPMENT UNDER TEST (EUT)
2.1. Identification of the EUT
*Equipment
: Audio Video Surround Receiver
*Model No.
: AVR 135/230
*Brand Name
: Harman/Kardon
*Serial No.
: N/A
*Manufacturer
: Anam Electronics Co., Ltd.
645, Sungkok-Dong , Ansan-City, Kyungki-Do,Korea
Fax: +82-345-490-2539, Tel: +82-345-490-2282
645, Sungkok-Dong , Ansan-City, Kyungki-Do,Korea
Fax: +82-345-490-2539, Tel: +82-345-490-2282
*Manufacturer
(China)
(China)
: DongGuan LiaoBu Anam Electronics.
Xin Cheng Management Area, LiaoBu Town,
DongGuan City, Guang Dong province, China
Fax: +86-769-321 6338, Tel: +86-769-332 6888
Xin Cheng Management Area, LiaoBu Town,
DongGuan City, Guang Dong province, China
Fax: +86-769-321 6338, Tel: +86-769-332 6888
*Power Rating
: AC 230V, 50Hz, Class II
*External signal
In/Out terminal
In/Out terminal
: FM Ant Terminal(75ΩUnbalanced Type)
AM Ant Terminal(300ΩBalanced Type)
: Audio(CD, Tape, Vid3, Vid2, Vid1, DVD,
FL/FR,SL/SR,C/SW,SBL/SBR, Optical/Coaxial)
: Preout
: Video(Vid3, Vid2, Vid1, DVD, Monitor)
: Component Video(Vid2, DVD, Monitor)
: S-Video(Vid3, Vid2, Vid1, DVD, Monitor)
: Speaker(Front L/R, Surround L/R, Center, Surround Back)
: Headphone
AM Ant Terminal(300ΩBalanced Type)
: Audio(CD, Tape, Vid3, Vid2, Vid1, DVD,
FL/FR,SL/SR,C/SW,SBL/SBR, Optical/Coaxial)
: Preout
: Video(Vid3, Vid2, Vid1, DVD, Monitor)
: Component Video(Vid2, DVD, Monitor)
: S-Video(Vid3, Vid2, Vid1, DVD, Monitor)
: Speaker(Front L/R, Surround L/R, Center, Surround Back)
: Headphone
*Function Selector : CD, Tape, Vid3, Vid2, Vid1, DVD, Tuner, 6ch, 8ch
*Speaker system
*Speaker system
: All 8Ω
*Amplifier Section : Stereo
: Surround
*Tuner Section
: FM 87.5 ㎒ ~ 108 ㎒ (50 ㎑ Steps)
: AM 522 ㎑ ~ 1,620 ㎑ (9 ㎑ Steps)
: AM 522 ㎑ ~ 1,620 ㎑ (9 ㎑ Steps)
2.2. Additional Information about the EUT
The EUT consists of the following Subsystems/Modules/Parts: N/A
The test have been performed on the EUT provided with the following
modifications: None.
modifications: None.
Reference No. : 54120503A Page 5
◀ Anam EMC Test Laboratory ▶
3.TEST SPECIFICATIONS
3.1. Standards
*EN55013
*EN55013
(2001):
Sound and Television broadcast receivers and Associated equipment
-Radio Disturbance characteristics - Limits and methods of measurement.
-Radio Disturbance characteristics - Limits and methods of measurement.
*EN61000-3-2
(2000):
Part 3-2: Limits- Limits for harmonic current emissions
(Equipment input current ≤16A per phase)
*EN61000-3-3 (1995 +Amd.1;2001):
Part 3-3: Limits- Limitation of voltage changes, voltage fluctuations and
flicker in public low-voltage supply systems for equipment with rated
current ≤16A.
flicker in public low-voltage supply systems for equipment with rated
current ≤16A.
3.2. Additions, deviations and exclusions from standard
No additions, deviations or exclusions have been made from standard.
3.3. Purpose of the test:
To determine whether the EUT fulfils the EMC-emission requirements of the
Standards stated in section 3.1.
3.4. Mode of operation during the test
The EUT was operated in such a way as to deliver one-eighth on the non-clipped
output power to the rated load impedance using the sinusoidal of 1 ㎑.
The EUT was set to the mode of Tuner.
4.TEST SUMMARY
The results in this report apply only to sample(s) tested:
Test item
Passed
the test
Note
Mains terminal disturbance voltage
Yes
Disturbance Radiation
Yes
Antenna Terminal Disturbance Voltage
Yes
Disturbance Power
Yes
Harmonics Yes
Voltage Fluctuations-Flicker
Yes
The equipment does comply with the requirements.
For the measurement data, see Annex.