Sony NEX-FS700 / NEX-FS700C / NEX-FS700CK / NEX-FS700E / NEX-FS700EK / NEX-FS700J / NEX-FS700JK / NEX-FS700K / NEX-FS700U / NEX-FS700UK (serv.man2) Service Manual ▷ View online
Sony Corporation
Revision History
Auto-ADJ
Ver. 1.0 2012.05
(ENGLISH)
For adjusting these models, the Adjust manual and the Adjust station are required.
Adjust station
It is the software to start up Adjust manual for each model.
It is the software to start up Adjust manual for each model.
Adjust manual
It is the software to adjust and check digital cameras and camcorders for service. The executable file (.msi) for each model is available.
For the operating procedure of the Adjust manual, start up the Adjust manual software and refer to “About the Adjust manual software” on the ‘NOTE’ tab.
In some cases, the Readme.txt is attached to the Adjust manual. The notes on installation or the like are described on it, so be sure to check it up.
It is the software to adjust and check digital cameras and camcorders for service. The executable file (.msi) for each model is available.
For the operating procedure of the Adjust manual, start up the Adjust manual software and refer to “About the Adjust manual software” on the ‘NOTE’ tab.
In some cases, the Readme.txt is attached to the Adjust manual. The notes on installation or the like are described on it, so be sure to check it up.
Note 1: In case of updating the Adjust station program, uninstall the previouse version before installing the newer version.
In case of updating the Adjust manual program, install with overwriting it.
Note 2: To perform Destination Data Write for this model, the Adjust manual of the DSC-WX50 series must have been installed.
Install the Adjust manual of the DSC-WX50 series in advance.
(JAPANESE)
これらの機種で調整を行なうには,アジャストマニュアルとアジャストステーションが必要です。
アジャストステーションとは
機種別のアジャストマニュアルを起動するためのソフトウェアです。
アジャストマニュアルとは
デジタルカメラ及びカムコーダのサービス用の調整ソフトウェアで,調整及び各種動作確認を行うことが可能です。
機種別に実行ファイル (.msi) が存在します。
アジャストマニュアルの操作方法については,アジャストマニュアル起動後に, NOTE タブにある About the Adjust manual
software を参照してください。
アジャストマニュアルにはReadme.txtが付いている場合があります。このファイルにはインストール時の注意事項などが記載されて
いますので,内容を必ず確認してください。
機種別に実行ファイル (.msi) が存在します。
アジャストマニュアルの操作方法については,アジャストマニュアル起動後に, NOTE タブにある About the Adjust manual
software を参照してください。
アジャストマニュアルにはReadme.txtが付いている場合があります。このファイルにはインストール時の注意事項などが記載されて
いますので,内容を必ず確認してください。
注意 1: アジャストステーションのプログラムを更新する場合は,古いバージョンのアジャストステーションをアンインストールしてから行なって
ください。
アジャストマニュアルのプログラムを更新する場合は,上書きインストールを行ってください。
注意 2: この機種で仕向け設定を行うには,DSC-WX50シリーズの Adjust manual がインストールされている必要があります。
先に DSC-WX50 シリーズの Adjust manual をインストールしてください。
9-834-674-51
NEX-FS700/FS700K/FS700C/FS700CK/FS700E/FS700EK/FS700J/FS700JK/FS700U/FS700UK_ADJ
Ver.
Date
History
Contents
S.M. Rev.
issued
1.0
2012.05
Official Release
—
—
983467451.pdf
2012E08-1
© 2012.05
Published by Sony Techno Create Corporation
NEX-FS700/FS700K/FS700C/FS700CK/FS700E/
FS700EK/FS700J/FS700JK/FS700U/FS700UK
– 2 –
NEX-FS700/FS700K/FS700C/FS700CK/FS700E/FS700EK/FS700J/FS700JK/FS700U/FS700UK_ADJ
1. System
Requirements
OS: Windows 2000 Professional SP4 or later
Windows XP Professional
Windows XP Home Edition
Windows
Vista
Windows
7
RAM: 256 MB or more recommended (Windows 2000, Windows XP)
1 GB or more recommended (Windows Vista, 7 (32 bit))
2 GB or more recommended (Windows 7 (64 bit))
USB port: USB 2.0 recommended (also compatible with USB 1.1)
Two ports are required.
Run time: .NET Framework 2.0
(If the .NET Framework 2.0 is not installed on the PC, the guide for installation is displayed at Adjust station installation.)
2. Installation
Note 1: Execute the installation with administrator authority.
Note 2: Be sure to install the Adjust station first.
Note 3: Do not change the folder the program is forwarded to.
Note 4: This manual describes the installation procedure on Windows 7.
Note 2: Be sure to install the Adjust station first.
Note 3: Do not change the folder the program is forwarded to.
Note 4: This manual describes the installation procedure on Windows 7.
2-1. Adjust station Installation
1. Download the Adjust station (AdjustStation_Ver□□.zip) from TISS home page.
2. Double-click setup.msi.
2. Double-click setup.msi.
3. The installation window appears.
Click
Click
[Next].
4. The window for selecting destination folder appears.
Click
Click
[Next].
5. When installation is completed, the window shown below appears.
Click [Close]. The installer is closed.
6. The shortcut icon of Adjust station is created on the desktop.
– ENGLISH –
– 3 –
NEX-FS700/FS700K/FS700C/FS700CK/FS700E/FS700EK/FS700J/FS700JK/FS700U/FS700UK_ADJ
2-2. Adjust manual Installation
Note 1: Before the Adjust manual installation, be sure the Adjust station is already installed.
Note 2: Do not change the initially set folder the program is forwarded to.
Note 2: Do not change the initially set folder the program is forwarded to.
1. Download the Adjust manual (NEX-FS700_Series AM_Ver_□.□_x64.zip) from TISS home page.
2. Double-click setup.msi.
2. Double-click setup.msi.
3. The installation window appears.
Click [Next]. Adjust manual installation starts.
4. The window for selecting destination folder appears.
Click
Click
[Next].
5. At this time, the installed contents confirmation window appears.
Click
Click
[Next].
6. When installation is completed, the window shown below appears.
Click [Close]. The installer is closed.
3. Directory
After installation is completed, the directory is created in the Program Files folder.
In case of the 32 bit PC
C:\Program Files\Sony adj\Adjust station\
C:\Program Files\Sony adj\Adjust manual\NEX-FS700 Series\
Product
name
In case of the 64 bit PC
C:\Program Files (x86)\Sony adj\Adjust station\
C:\Program Files (x86)\Sony adj\Adjust manual\NEX-FS700 Series\
Product
name
– ENGLISH –
– 4 –
NEX-FS700/FS700K/FS700C/FS700CK/FS700E/FS700EK/FS700J/FS700JK/FS700U/FS700UK_ADJ
4. Uninstallation
1. Select [Control panel] from Windows [Start] menu.
2. Double-click [Programs and Features] icon.
3. Select the program to be uninstalled (Adjust station or Adjust manual for each model), and click [Uninstall].
2. Double-click [Programs and Features] icon.
3. Select the program to be uninstalled (Adjust station or Adjust manual for each model), and click [Uninstall].
4. The confirmation window to uninstall the program appears.
Click
Click
[Yes].
5. In case other programs are uninstalled, repeat steps 3 to 4.
Adjust station Operation Guide
1.
Starting up Adjust station and Adjust manual
1. Double-click the Adjust station shortcut icon on the desktop.
2. The Adjust station main window appears.
3. Enter the model name to be adjusted in the [Direct Search] box, and then click [OK].
Note: For searching the model name, refer to “2. Search Function”.
4. Adjust manual for the specified model starts up. The Adjust station main window is minimized.
2. Search Function
Four methods to enter the product name on the Adjust station main screen are described below.
Method 1
Enter the model name directly in the [Direct Search] box and click [OK].
Note: In case the program for input model does not exist or the incorrect model name is entered, the window shown below appears.
Click [OK], and re-enter the correct model name.
Method 2
Recently used model names (maximum ten) are displayed in the [Recent files] box.
Click the model name in the [Recent files] box. The model name is displayed in the [Direct Search] box.
– ENGLISH –
Display