Sony SS-WGP5 / SS-WGP8 Service Manual ▷ View online
1
Design and specifi cations are subject to
change without notice.
change without notice.
Ver. 1.2 2013. 03
SERVICE MANUAL
E Model
Sony Corporation
Published by Sony EMCS (Malaysia) PG Tec
SPEAKER SYSTEM
• SS-WGP5 is the subwoofer speaker in MHC-GPX5
• SS-WGP8 is the subwoofer speaker in MHC-GPX8
• SS-GPX5P is the package speakers of SS-GPX5 and
SS-WGP5 (AR model)
• SS-GPX8P is the package speakers of front, satellite and
• SS-WGP8 is the subwoofer speaker in MHC-GPX8
• SS-GPX5P is the package speakers of SS-GPX5 and
SS-WGP5 (AR model)
• SS-GPX8P is the package speakers of front, satellite and
subwoofer speakers in MHC-GPX8
SS-WGP5
9-890-601-03
2013C08-1
©
2013.03
• JIG
When disassembling the set, use the following jig (for front panel
When disassembling the set, use the following jig (for front panel
removal).
Part No.: J-2501-238-A JIG FOR SPEAKER REMOVAL
SS-WGP8
SPECIFICATIONS
Subwoofer
SS-WGP8 for MHC-GPX8
SS-WGP5 for MHC-GPX5
Subwoofer system
1-way, Bass refl ex
Speaker unit
Subwoofer: 250 mm, cone type
Rated impedance
SS-WGP8: 8 ohms
SS-WGP5: 5 ohms
SS-WGP8 for MHC-GPX8
SS-WGP5 for MHC-GPX5
Subwoofer system
1-way, Bass refl ex
Speaker unit
Subwoofer: 250 mm, cone type
Rated impedance
SS-WGP8: 8 ohms
SS-WGP5: 5 ohms
Dimensions (w/h/d) (Approx.)
SS-WGP8: 360 mm × 395 mm × 335 mm
SS-WGP5: 360 mm × 395 mm × 315 mm
Mass (Approx.)
SS-WGP8: 7.9 kg
SS-WGP5: 8.2 kg
Quantity:
MHC-GPX8: 2 pieces
MHC-GPX5: 1 piece
SS-WGP8: 360 mm × 395 mm × 335 mm
SS-WGP5: 360 mm × 395 mm × 315 mm
Mass (Approx.)
SS-WGP8: 7.9 kg
SS-WGP5: 8.2 kg
Quantity:
MHC-GPX8: 2 pieces
MHC-GPX5: 1 piece
SS-WGP5/WGP8
SS-GPX5P/SS-GPX8P
2
SS-WGP5/WGP8
THIS NOTE IS COMMON FOR PRINTED WIRING BOARDS AND SCHEMATIC DIAGRAMS.
(In addition to this, the necessary note is printed in each block.)
(In addition to this, the necessary note is printed in each block.)
For Schematic Diagrams.
Note:
•
•
C : Panel designation.
For Printed Wiring Boards.
Note:
•
•
X : Parts extracted from the component side.
•
: Pattern from the side which enables seeing.
(The other layers’ patterns are not indicated.)
SECTION 1
DIAGRAMS
1
2
3
4
4P
CN001
+9.0V
RED_LED
BLUE_LED
GREEN_LED
R
G
B
SMLV56RGB1U1
D001
JL001
JL002
JL003
JL004
1
2
3
4
5
6
7
A
B
C
D
HCD-GPX8G
LED SPEAKER
HCD-GPX8G
LED SPEAKER
D001
1
4
CN001
JL003
JL001
JL002
JL004
SPK RGB LED BOARD
SS-GPX8
SPK RGB LED BOARD
SS-GPX8
1
2
3
4
5
6
7
A
B
C
1-1. PRINTED WIRING BOARD – SPK RGB LED Board -
•
: Uses unleaded solder.
1-2. SCHEMATIC DIAGRAM – SPK RGB LED Board –
3
SS-WGP5/WGP8
NOTE:
• -XX, -X mean standardized parts, so they
• -XX, -X mean standardized parts, so they
may have some differences from the original
one.
•
•
Items marked “*” are not stocked since they
are seldom required for routine service.
Some delay should be anticipated when
ordering these items.
SECTION 2
EXPLODED VIEWS
2-1. SS-WGP5
• Abbreviation
AR :
AR :
Argentina
model
E4 :
African
model
E2
: 120V AC area in E model
E51
: Chilean and Peruvian models
MX
: Mexican model
1
A-1857-629-B PANEL
ASSY,
FRONT
2
4-245-976-01 SCREW (4X16) (TYPE1), +BVTP
3
1-858-744-11 LOUDSPEAKER
(25CM)
4
4-176-619-01 FOOT,
RUBBER
5
1-839-138-21 CORD WITH CONNECTOR (SPEAKER)
Ref. No.
Part No.
Description
Remark
Ver. 1.2
1
2
3
5
not supplied
not supplied
4
2
not supplied
4
SS-WGP5/WGP8
2-2. SS-WGP8
51
A-1857-643-B PANEL
ASSY,
FRONT
52
4-245-976-01 SCREW (4X16) (TYPE1), +BVTP
53
4-874-614-02 SCREW (1) (3.5X14), TAPPING
54
1-858-743-11 LOUDSPEAKER
(25CM)
55
4-424-243-01 CATCHER, RUBBER (14MM)
56
1-839-682-11 CORD WITH CONNECTOR
57
4-176-619-01 FOOT,
RUBBER
Ref. No.
Part No.
Description
Remark
51
55
53
52
52
54
56
56
57
not supplied
not supplied
not supplied
not supplied
not supplied
(SPK RGB board)
(SPK RGB board)
Ver. 1.1
Display