Sharp VC-MH713 (serv.man12) User Manual / Operation Manual ▷ View online
10
If problems persist contact the SHARP Helpline on tel: 0990-274277
BASIC OPERATION
HOW TO PLAYBACK A VIDEO TAPE
•
For double speed playback (without sound), press the
PLAY/X2
button again.
•
To revert to normal playback, press the
PLAY/X2
button again.
•
To stop the video tape, press
STOP
.
•
To eject the tape press
EJECT
on the VCR.
SHARP SUPER PICTURE
should enhance the picture quality during playback. It is
normally set to ON. To turn
SHARP SUPER PICTURE
on or off press
SUPER P.
on
the VCR front panel.
PICTURE DISTURBANCE DURING PLAYBACK
This VCR has an automatic tracking system which reduces picture disturbance when you start
to playback a video tape. When auto-tracking is in operation
flashes on the on-screen
display. If the picture still has disturbance you may need to manually track the video tape:
During PLAYBACK of a video tape.
•
Press
CHANNEL
or
to position picture interference off the TV screen.
(Manual Tracking)
•
Press
CHANNEL
and
buttons together to start Auto Tracking.
PAUSING AND SLOW MOTION
1.
Press the
PLAY/X2
button to start the video tape playing.
2.
To pause the video tape, press
PAUSE/STILL
.
•
To minimise jitter whilst in pause mode press
CHANNEL
or
.
•
Press the
PLAY/X2
button to resume playback.
3.
To playback in slow motion (without sound) press the
SLOW
button on the remote
control. Slow motion speed can be adjusted using the
or
buttons next to the slow
button. Picture disturbance can be improved by using the
CHANNEL
or
during slow motion playback.
•
Press the
PLAY/X2
button to resume playback.
NOTES:
•
When using SLOW MOTION function some mechanical noise may be heard.
•
There will be picture interference and possibly a change to black and white picture
using Pause and Slow functions.
using Pause and Slow functions.
•
PAUSE mode will disengage after about 5 minutes.
PLAY / X2
PLAY / X2
STOP
CHANNEL
CHANNEL
CHANNEL
CHANNEL
PLAY / X2
PAUSE/STILL
CHANNEL
CHANNEL
PLAY / X2
SLOW
CHANNEL
CHANNEL
DPSS
INPUT SELECT
CHANNEL
AM/PM
SLOW
TAPE
SPEED
TV/VCR
REC
PAUSE/STILL
REW
FF
PLAY / X2
STOP
7
8
0
9
PLAY / X2
Remote Control
VC-MH713HM.book Page 10 Monday, May 8, 2000 11:53 AM
11
If problems persist contact the SHARP Helpline on tel: 0990-274277
BASIC OPERATION
HOW TO PLAYBACK A VIDEO TAPE
FAST FORWARDING/REWINDING A VIDEO TAPE
1.
Press
STOP
to stop the video tape.
2.
Press the
FAST FORWARD
/
REWIND
buttons on the remote control
or
turn
the shuttle ring on the VCR fully to the
Right for Fast Forward
and fully to the
Left for Rewind
and
Release
.
3.
To stop fast forward/rewind, press
STOP
.
FORWARD/REVERSE VISUAL SEARCH
1.
During playback to select search mode, press the
FAST FORWARD
/
REWIND
buttons on the remote control,
or
turn the shuttle ring fully to the
Right for
Forward Visual Search
or fully to the
Left for Reverse Visual Search
then
Release
. (On
release the shuttle returns back to starting position). Press the
PLAY/X2
button to
resume playback.
OR
2.
To decrease the speed, during visual search mode press
FAST FORWARD
/
REWIND
again, or turn and hold the shuttle ring halfway to the
Right for Forward
Visual Search
or
Left for Reverse Visual Search
. Release the shuttle to resume playback
or
if the remote control was used press the
PLAY/X2
button.
NOTE:
•
There will be picture interference and possibly a change to black and white picture
using Visual Fast Forward/Rewind functions.
using Visual Fast Forward/Rewind functions.
STOP
FF
REW
STOP
FF
REW
PLAY / X2
FF
REW
PLAY / X2
REC
PAUSE/STILL
REW
FF
PLAY / X2
STOP
Remote Control
Module 04E.fm Page 11 Tuesday, May 9, 2000 4:25 PM
12
If problems persist contact the SHARP Helpline on tel: 0990-274277
BASIC OPERATION
IMMEDIATE RECORDING
SELECTION OF A CHANNEL
Select the channel you wish to record by using the number buttons on the VCR remote
control, or select the next/previous channel by pressing
CHANNEL
or
on the
remote control or on the VCR front panel.
To change between single digit and 2-digit channel numbers, press
AM/PM
.
For example, for channel 24, press
AM/PM
then press
2
4
.
You can record the channel you are watching or a different channel.
1.
Insert a video tape into your VCR.
2.
Select the channel you wish to record on the VCR as above.
3.
To start recording, press
REC
.
4.
To pause during recording, press
PAUSE/STILL
.
5.
To continue recording, press
REC
.
6.
To stop recording, press
STOP
once.
SIMPLE TIMED RECORDING:
1.
Press
REC
.
2.
To specify a stop time, each additional press of
REC
will delay the stop time by 10
minutes.
3.
To stop recording at any time, press
STOP
once.
NOTES:
•
If the tape ends before the recording is complete the VCR will stop recording, rewind,
eject the tape and place the VCR into STANDBY mode, or just eject the tape and place
the VCR in STANDBY timer mode if the VCR is in timer record mode.
eject the tape and place the VCR into STANDBY mode, or just eject the tape and place
the VCR in STANDBY timer mode if the VCR is in timer record mode.
•
If the VCR ejects the video tape when you press
REC
the tape is record protected.
i.e. record protection tab has been removed.
CHANNEL
CHANNEL
AM/PM
AM/PM
REC
PAUSE/STILL
REC
STOP
STOP 15:30
REC
REC
DPSS
INPUT SELECT
CHANNEL
AM/PM
SLOW
TAPE
SPEED
TV/VCR
REC
PAUSE/STILL
REW
FF
PLAY / X2
STOP
7
8
0
9
STOP
REC
Remote Control
VC-MH713HM.book Page 12 Monday, May 8, 2000 11:53 AM
13
If problems persist contact the SHARP Helpline on tel: 0990-274277
BASIC OPERATION
HOW TO USE TO MAKE A RECORDING
Before you start!
•
If
appears on the VCR display, press the
TIMER ON/OFF
button to remove
the
symbol.
•
Check that the VCR clock is displaying the correct time.
VIDEOPLUS+ allows you to program the VCR to record up to eight programmes using the
VIDEOPLUS+ numbers published in TV listings (refer to your daily newspaper or TV magazine).
VIDEOPLUS+ numbers published in TV listings (refer to your daily newspaper or TV magazine).
1.
Press the
PLUSCODE
button on the
remote control.
2.
Enter the VIDEOPLUS+ number from the TV
listing using the
listing using the
NUMBER BUTTONS
.
NOTE:
3.
Press the [
/
] menu select buttons to
select ONCE, WEEKLY, DAILY.
4.
If you want to make additional recordings at
the same time each day or week, then use
[
/
]
to select the WEEKLY, or DAILY
option as appropriate.
5.
Press the
SET
button to confirm.
NOTE:
The first time that you use VIDEOPLUS+ to make a
recording on each channel Preset, (PR) may be
highlighted on the On-Screen Display.
recording on each channel Preset, (PR) may be
highlighted on the On-Screen Display.
6.
Enter the channel you wish to record using
the
the
NUMBER BUTTONS
, for example if
you wish to record channel 2 press
0 2
. The
VCR will remember this for the future.
See next page to continue
•
An ERROR message will appear if you have entered a number that is not a current
VIDEOPLUS+ number. If this happens press
VIDEOPLUS+ number. If this happens press
CLEAR
to delete the numbers as required
and enter the correct VIDEOPLUS+ number
•
Check that the menu list agrees with the times shown in the TV listing. If it does not press
CLEAR
to return to the VIDEOPLUS+ menu, and re-enter the correct VIDEOPLUS+
number
TIMER
ON/OFF
→
P L U S COD E .
-
ONC E
WE E K L Y
DA I L Y
PLUSCODE
PLUSCODE
REMOTE CONTROL
MENU SELECT
BUTTONS
SET
1 / 2
DA T E P R
S T AR T
S T OP
2 1 / 0 6
0 2
1 2 : 0 0
1 3 : 0 0
S P
- - / - -
- -
- : - -
- : - -
- -
- - / - -
- -
- : - -
- : - -
- -
- - / - -
- -
- : - -
- : - -
- -
P R
: CH 3 2
: S E L EC T
: CHANGE
S E T
: E N T E R ME NU : E X I T
VC-MH713HM.book Page 13 Monday, May 8, 2000 11:53 AM
Click on the first or last page to see other VC-MH713 (serv.man12) service manuals if exist.