Sharp MX-M264N / MX-M264NR / MX-M264NV / MX-M264U / MX-M314N / MX-M314NR / MX-M314NV / MX-M314U / MX-M354N / MX-M354NR / MX-M354U (serv.man7) Service Manual ▷ View online
MX-M264U CONSUMABLE PARTS 3 – 2
2. Maintenance parts list
A. North America, Middle America, South America
* The other maintenance parts than the above are supplied as service parts.
B. SEGA/ SUK/ SCA/ SCNZ/ SEA/ SEES/ SEZ/ SEIS/ SEB/ SEN/ SEF/ SMEF/ Russia/ Korea/ Special country
* The other maintenance parts than the above are supplied as service parts.
No.
Item
Content
Life
Model name
Remarks
1
Upper heat roller kit
Upper heat roller
x 1
150K
AR-310UH
Fuser gear
x 1
Upper heat roller bearing
x 2
Upper cleaning pad
x 1
Fusing separation pawl (upper)
x 4
Thermistor cleaning pad
x 2
2
Lower heat roller kit
Lower heat roller
x 1
300K
MX-311LH
Fusing separation pawl (lower)
x 4
Fuser bearing (lower)
x 2
3
150K maintenance kit
Drum separation pawl unit
x 2
150K
MX-311KA
Transfer roller unit
x 1
DV blabe
x 1
DV side sheet F
x 1
DV side sheet R
x 1
Toner filter unit
x 1
4
MC unit
MC unit
x 10
26cpm: 75K (x 10)
31/35cpm: 100K (x 10)
MX-311MC
5
Cleaner blade
Cleaner blade
x 10
26cpm: 75K (x 10)
31/35cpm: 100K (x 10)
MX-311CB
6
Drum frame unit
Drum frame unit
x 1
26cpm: 225K
31/35cpm: 300K
MX-311DU
* The life of the toner reception seat attached
to the drum frame is 300K, and it can be
used up to 3 times.
(Supplied as a drum frame unit.)
used up to 3 times.
(Supplied as a drum frame unit.)
7
Transfer roller unit
Transfer roller unit
x 1
150K
MX-311TX
8
Paper feed roller kit
Paper feed roller kit
x 1
100K
MX-311RT
9
Fusing unit
Fusing unit (120V heater lamp)
x 1
150K
MX-311FU
10
Staple cartridge
Staple cartridge
x 3
5000 staples x 3
MX-SCX1
No.
Item
Content
Life
Model name
Remarks
1
Upper heat roller kit
Upper heat roller
x 1
150K
AR-310UH
Fuser gear
x 1
Upper heat roller bearing
x 2
Upper cleaning pad
x 1
Fusing separation pawl (upper)
x 4
Thermistor cleaning pad
x 2
2
Lower heat roller kit
Lower heat roller
x 1
300K
MX-311LH
Fusing separation pawl (lower)
x 4
Fuser bearing (lower)
x 2
3
150K PM kit
Drum separation pawl unit
x 2
150K
MX-311KA
Transfer roller unit
x 1
DV blade
x 1
DV side sheet F
x 1
DV side sheet R
x 1
Toner filter unit
x 1
4
MC unit
MC unit
x 10
26cpm: 75K (x 10)
31/35cpm: 100K (x 10)
MX-311MC
5
Cleaner blade
Cleaner blade
x 10
26cpm: 75K (x 10)
31/35cpm: 100K (x 10)
MX-311CB
6
Drum frame unit
Drum frame unit
x 1
26cpm: 225K
31/35cpm: 300K
MX-311DU
* The life of the toner reception seat attached
to the drum frame is 300K, and it can be
used up to 3 times.
(Supplied as a drum frame unit.)
used up to 3 times.
(Supplied as a drum frame unit.)
7
Transfer roller unit
Transfer roller unit
x 1
150K
MX-311TX
8
Staple cartridge
Staple cartridge
x 3
5000 staples x 3
MX-SCX1
1
MX-M264U CONSUMABLE PARTS 3 – 3
C. STCL/ SRH/ SRS/ SRSSC/ SBI/ Agent
* The other maintenance parts than the above are supplied as service parts.
3. Developer/Drum life end definition
• When the developer/drum counter reaches the specified level.
• When the developer/drum rpm reaches the specified level.
When either of the above reached the specified level, it is judged as life end.
In an actual case, when correction or warm-up operation is performed as well as output operation, the developer and the drum rotates.
Therefore, the developer/drum consuming level cannot be determined only by the copy/print quantity. When, therefore, the rpm reaches the
specified level, it is judged as life end.
specified level, it is judged as life end.
To check the drum and developer life, use SIM22-1/SIM22-13.
No.
Item
Content
Life
Model name
Remarks
1
Upper heat roller kit
Upper heat roller
x 1
150K
AR-310UH
Fuser gear
x 1
Upper heat roller bearing
x 2
Upper cleaning pad
x 1
Fusing separation pawl (upper)
x 4
Thermistor cleaning pad
x 2
2
Lower heat roller kit
Lower heat roller
x 1
300K
MX-311LH
Fusing separation pawl (lower)
x 4
Fuser bearing (lower)
x 2
3
150K PM kit
Drum separation pawl unit
x 2
150K
MX-311KA
Transfer roller unit
x 1
DV blade
x 1
DV side sheet F
x 1
DV side sheet R
x 1
Toner filter unit
x 1
4
MC unit
MC unit
x 10
26cpm: 75K (x 10)
31/35cpm: 100K (x 10)
MX-311MC
5
Cleaner blade
Cleaner blade
x 10
26cpm: 75K (x 10)
31/35cpm: 100K (x 10)
MX-311CB
6
Drum frame unit
Drum frame unit
x 1
26cpm: 225K
31/35cpm: 300K
MX-311DU
* The life of the toner reception seat
attached to the drum frame is 300K, and it
can be used up to 3 times.
(Supplied as a drum frame unit.)
can be used up to 3 times.
(Supplied as a drum frame unit.)
7
Staple cartridge
Staple cartridge
x 3
5000 staples x 3
MX-SCX1
Developer/drum counter
Number of rotations
(Rotations)
Developer/drum
26cpm model
31/35cpm model
550K
75K
100K
MX-M264U CONSUMABLE PARTS 3 – 4
4. Production number identification
<Toner cartridge>
The label on the toner cartridge shows the date of production.
<Developer>
The lot number is of 8 digits. Each digit indicates the content as fol-
lows.
lows.
The number is printed on the right under side of the back surface of
the developer bag.
the developer bag.
<Drum>
The laser print indicates the model conformity code and the date
(year, month, day) of production.
(year, month, day) of production.
5. Environmental conditions
1
2
3
4
5
6
7
8
1
Alphabet
Indicates the production factory.
2
Number
Indicates the production year.
3, 4
Number
Indicates the production month.
5, 6
Number
Indicates the production day.
7
Hyphen
8
Number
Indicates the production lot.
Label position
Internal product name
Incompatibility
Destination
Version No.
Production year/month/day (6 digits)
Serial No. in production day (5 digits)
Production place (1 digits)
1
2
3
4
5
1
Alphabet
Indicates the model conformity code. L for this model.
2
Number
Indicates the end digit of the production year.
3
Number or X, Y, Z
Indicates the month of packing.
X stands for October, Y November, and Z December.
4, 5
Number
Indicates the day of the month of packing.
Standard environmental
conditions
conditions
Temperature
20 - 25
C
Humidity
65
5%RH
Usage environmental
conditions
conditions
Temperature
10 - 35
C
Humidity
20 - 85%RH
Atmospheric
pressure
pressure
590 - 1013 hPa
(height: 0 - 2000m)
(height: 0 - 2000m)
Storage period
Toner/Developer: 24 months from the
manufactured month (Production lot) under
unsealed state
Drum: 36 months from the manufactured month
under unsealed state
manufactured month (Production lot) under
unsealed state
Drum: 36 months from the manufactured month
under unsealed state
(Humidity)
85%
60%
20%
10 C
30 C
35 C
(Temperature)
MX-M264U EXTERNAL VIEW AND INTERNAL STRUCTURE 4 – 1
MX-M264U
Service Manual
[4] EXTERNAL VIEW AND INTERNAL STRUCTURE
1. External view
*1: Peripheral device.
No.
Name
Function/Operation
1
Job separator tray (Upper tray) (optional)
Print jobs and received faxes are delivered to this tray.
2
Automatic document feeder
This automatically feeds and scans multiple originals. Both sides of 2-sided originals can be automatically
scanned.
scanned.
3
Front cover
Open this cover to switch the main power switch to "On" or "Off" or to replace a toner cartridge.
4
Output tray (center tray)
Output is delivered to this tray.
5
Operation panel
This is used to select functions and enter the number of copies.
6
Exit tray unit (right tray)*
1
When installed, output can be delivered to this tray.
7
Finisher*
1
This can be used to staple output.
8
USB connector (A type)
Supports USB 2.0 (Hi-Speed).
This is used to connect a USB device such as USB memory to the machine.
For the USB cable, use a shielded cable.
This is used to connect a USB device such as USB memory to the machine.
For the USB cable, use a shielded cable.
9
Keyboard*
1
The keyboard is integrated into the main unit.
If not using the keyboard, it can be retracted into the bottom of the operation panel.
If not using the keyboard, it can be retracted into the bottom of the operation panel.
10
Main power switch
This is used to power on the machine.
When using the fax or Internet fax functions, keep this switch in the "on" position.
When using the fax or Internet fax functions, keep this switch in the "on" position.
11
Tray 1
This holds paper.
12
Tray 2
This holds paper. (Only for NV models, this is the option.)
13
Tray 3 (when a paper drawer is installed)*
1
This holds paper.
14
Tray 4 (when a paper drawer is installed)*
1
This holds paper.
2
1
3
4
6
7
5
When a finisher is installed
When a output tray unit is installed
9
10
When a keyboard is installed
12
11
13
14
8
2 Å
2013.8.23
2
3
‘13/Oct
Click on the first or last page to see other MX-M264N / MX-M264NR / MX-M264NV / MX-M264U / MX-M314N / MX-M314NR / MX-M314NV / MX-M314U / MX-M354N / MX-M354NR / MX-M354U (serv.man7) service manuals if exist.