Sharp MX-FNX1 (serv.man17) Service Manual / Technical Bulletin ▷ View online
Sharp Electronics (UK) Ltd., Document Systems Support
1/5
Date:
16
th
May 2014
Model:
See below
Ref.:
CCE1223R
Colour:
White
Page:
1 of 5
TECHNICAL BULLETIN
COUNTERMEASURE FOR PAPER JAM
(POD1_S/POD2_S) AROUND ENTRANCE
SECTION OF INNER FINISHER
(POD1_S/POD2_S) AROUND ENTRANCE
SECTION OF INNER FINISHER
*Regarding
“COUNTERMEASURE FOR PAPER JAM (POD2_S) AROUND ENTRANCE
SECTION OF INNER FINISHER” announced in T/R No. CCE-1223 issued on December
3rd, 2013, the procedure for Field Action has been added to Page-4, 5.
1. Model Name:
MX-FNX9 (Option for MX-4140N/4141N/5140N/5141N,
MX-4110N/4111N/4112N/5110N/5111N/5112N,
MX-4100N/4101N/5000N/5001N,
MX-2301N/2600G/3100G/2600N/3100N,
MX-M283N/M363N/M453N/M503N/M363U/M453U/M503U)
MX-PNX1A/B/C/D
(Option
for MX-4140N/4141N/5140N/5141N,
MX-4110N/4111N/4112N/5110N/5111N/5112N,
MX-4100N/4101N/5000N/5001N,
MX-3500N/3501N/4500N/4501N,
MX-2301N/2600G/3100G/2600N/3100N,
MX-1800N/2300G/2700G/2300N/2700N,
MX-M283N/M363N/M453N/M503N/M363U/M453U/M503U)
MX-FNX1 (Option for MX-3500N/3501N/4500N/4501N,
MX-1800N/2300G/2700G/2300N/2700N)
2. Symptom:
When installing the inner finisher (MX-FNX9) to MX-4140N/4141N/5140N/5141N,
the paper is hitting to the entrance area of the inner finisher, which may cause the paper
jam
(POD1_S/POD2_S
etc).
Please note that this is the symptom caused relating to the ejecting sponge used only for
the paper exit unit of MX-4140N/4141N/5140N/5141N and this ejecting sponge is not
used for other models and therefore this symptom is not applied to other models.
3. Description:
To prevent the paper from hitting to the entrance area of the inner finisher, the following
modifications have been made:
- Mounting hole positions of Dummy Punch Unit of Bracket Unit are changed.
- The shape of the Mylar affixed to the entrance of Dummy Punch Unit is changed.
(Packing control No. "C00" or later indicate the modified parts so we recommend you
should use MX-FNX9 with packing control No. "C00" or later for
MX-4140N/4141N/5140N/5141N.)
Sharp Electronics (UK) Ltd., Document Systems Support
2/5
- Change of the dimension of Mylar (MX-FNX9/FNX1/PNX1)
- Mylar affixation position (MX-FNX9/FNX1)
- Change of hole positions of Bracket Unit (MX-FNX9/FNX1)
- Identification of current/new Bracket Unit (MX-FNX9/FNX1)
Move the mounting hole position of
Dummy Punch Unit to 1.5mm upper side.
Move the mounting hole position of
Dummy Punch Unit to 1.5mm upper side.
Before change: 12mm
After change: 13.1mm
Modified parts:
"N" mark is added.
Dummy Punch Unit
Protruded amount of Mylar
Before change: 1.8mm
After change: 2.9mm
Move the mounting hole position of
Dummy Punch Unit to 1.5mm upper side.
Mylar
Sharp Electronics (UK) Ltd., Document Systems Support
3/5
- Change of the hole positions of Drawer Bracket (MX-PNX1)
- Identification of current/new Drawer Bracket
- Mylar affixation position (MX-PNX1)
4. Action:
From mid-September 2013 production
5. Parts Action:
Ref.
No.
Model
name
Version P/G No.
Current parts
New parts
Price
rank
Q'ty Parts
name
Effective
time
Inter-
change-
ability
Parts code
Parts code
1
MX-FNX9
MX-FNX1
MX-FNX1
ALL
13-18
0CW4141K085// 0CW4141K08501
BS
1
DUMMY PUNCH
UNIT
UNIT
2013/9
Mid
3
13-21
0CW4141K080B/ 0CW4141K08001
BD
BRACKET
UNIT
13-
0CW1035P301// 0CW4F521810// AF
MYLAR
MX-PNX1
1-9
0CW1035P102// 0CW1035P10201
AL
DRAWER
BRACKET
2-21
0CW1035P301// 0CW4F521810// AF
MYLAR
<Interchange>
1. Interchangeable.
4. Not interchangeable.
2. Current type can be used in place of new type.
New type cannot be used in place of current type.
5. Interchangeable if replaced with same types of
related parts in use.
3. Current type cannot be used in place of new type.
New type can be used in place of current type.
6. Others.
Parts marked with "
" is important for maintaining the safety of the set. Be sure to replace these parts with
specified ones for maintaining the safety and performance of the set.
Move the mounting
hole position of
Drawer to 1.5mm
lower side.
Modified parts: "N" mark is added.
Punch Unit
Protruded amount of Mylar
Before change: 1.8mm
After change: 2.9mm
Move the mounting
screw hole position of
Drawer to 1.5mm lower
side.
Mylar
Sharp Electronics (UK) Ltd., Document Systems Support
4/5
6. Field Action:
1. Remove the ejecting sponges (x6) mounted on the delivery follower roller of the delivery unit.
Pull out the ejecting sponge while
picking up with the nipper etc.
and then remove it.
Display