Sharp AR-C262M (serv.man19) User Manual / Operation Manual ▷ View online
19
INSTALLING AND USING THE
TWAIN DRIVER
TWAIN DRIVER
The procedures for installing and using the TWAIN driver are explained below.
Before installation
Check the following before installing the TWAIN driver:
• Make sure that your computer system meets the requirements below.
Computer type:
IBM PC/AT or compatible computer
Hardware requirements of the operating system
must be satisfied.
Hardware requirements of the operating system
must be satisfied.
Operating system:
Microsoft Windows 95
Microsoft Windows 98
Microsoft Windows Me
Microsoft Windows 2000 Server/Professional
Microsoft Windows NT 4.0 (Service Pack 3 or later)
Microsoft Windows XP Professional/Home Edition
Microsoft Windows Server 2003
(Cannot be used on Windows NT 4.0 Terminal Server.)
Microsoft Windows 98
Microsoft Windows Me
Microsoft Windows 2000 Server/Professional
Microsoft Windows NT 4.0 (Service Pack 3 or later)
Microsoft Windows XP Professional/Home Edition
Microsoft Windows Server 2003
(Cannot be used on Windows NT 4.0 Terminal Server.)
Installing the TWAIN driver
The procedure for installing the TWAIN driver is explained below.
1
Insert the "Software CD-ROM" that
accompanied the machine into your CD-
ROM drive.
accompanied the machine into your CD-
ROM drive.
2
Click the [start] button, click [My
Computer], and then double-click the CD-
ROM icon.
Computer], and then double-click the CD-
ROM icon.
In Windows 95/98/Me/NT 4.0/2000, double-click
[My Computer], and then double-click the CD-
ROM icon.
[My Computer], and then double-click the CD-
ROM icon.
3
Double-click the [SETUP] icon.
4
The Licence Agreement window will
appear. Make sure that you understand
the contents of the licence agreement, and
then click the [Yes] button.
appear. Make sure that you understand
the contents of the licence agreement, and
then click the [Yes] button.
5
After confirming the message in the
"Welcome" window, click the [Next]
button.
"Welcome" window, click the [Next]
button.
6
Click the [Utility Software] button.
To view detailed information on the software, click
the [Display Readme] button.
the [Display Readme] button.
● If you wish to install the printer driver, see
"INSTALLING THE PRINTER DRIVER AND
UTILITIES (SOFTWARE INSTALLATION)" on
pages 4 through 16.
UTILITIES (SOFTWARE INSTALLATION)" on
pages 4 through 16.
● If you wish to install the printer administration
utility, click the [Administrator Tools] button in this
window and then click the [Printer Administration
Utility] button and follow the on-screen instructions.
window and then click the [Printer Administration
Utility] button and follow the on-screen instructions.
NOTE
● The TWAIN driver can only be used on a network port. It cannot be used on a parallel port or USB port. For
● The TWAIN driver can only be used on a network port. It cannot be used on a parallel port or USB port. For
information on network environments, see page 5.
● To use the TWAIN driver in a Windows NT 4.0 environment, you must have administrator rights.
● There are two methods for installing the TWAIN driver: installation using the integrated installer as explained in
● There are two methods for installing the TWAIN driver: installation using the integrated installer as explained in
this manual, and installation by specifying the INF file (for the WIA/STI driver) from the operating system. If you
will be using the TWAIN driver, it is recommended that you install it using the integrated installer. A driver
installed by specifying the INF file and a driver installed with the integrated installer cannot coexist.
If a driver that was installed by specifying the INF file already exists, delete it before installing the TWAIN driver
with the integrated installer.
will be using the TWAIN driver, it is recommended that you install it using the integrated installer. A driver
installed by specifying the INF file and a driver installed with the integrated installer cannot coexist.
If a driver that was installed by specifying the INF file already exists, delete it before installing the TWAIN driver
with the integrated installer.
!whaleII_inst_ex.book 19 ページ ２００４年９月１０日 金曜日 午前８時４８分
INSTALLING AND USING THE TWAIN DRIVER
20
7
Click the [Scanner Driver (TWAIN)] button.
8
Click the [OK] button.
9
When the window for finishing setup
appears, click the [Finish] button.
appears, click the [Finish] button.
10
Click the [Close] button.
This completes the installation procedure.
!whaleII_inst_ex.book 20 ページ ２００４年９月１０日 金曜日 午前８時４８分
INSTALLING AND USING THE TWAIN DRIVER
21
Setting the IP address
The "TWAIN IP Selector" application is installed at the same time as the TWAIN driver.
The procedure for setting the IP address using the "TWAIN IP Selector" is explained below.
The procedure for setting the IP address using the "TWAIN IP Selector" is explained below.
1
Click the "Start" button and select
"Programs", "SHARP MFP TWAIN C", and
"TWAIN IP Selector".
"Programs", "SHARP MFP TWAIN C", and
"TWAIN IP Selector".
The "Selector" window appears.
2
Click the "Add" button.
The "Add New Address" window appears and the
machine is automatically detected on the network.
machine is automatically detected on the network.
3
Select "IP address" of the machine that
you are using and click the "OK" button.
you are using and click the "OK" button.
Be sure to ask your network administrator for the
IP address.
IP address.
4
Check "IP address" and "Name" shown in
the "Selector" window.
the "Selector" window.
If you need to change the name, click the "Update"
button.
button.
This completes the procedure for setting the IP
address.
address.
!whaleII_inst_ex.book 21 ページ ２００４年９月１０日 金曜日 午前８時４８分
INSTALLING AND USING THE TWAIN DRIVER
22
Scanning with the TWAIN driver
The TWAIN driver (SHARP MFP TWAIN C) complies with the international TWAIN standard and can be used with
many TWAIN-compliant software applications.
The example of scanning with Imaging* in Windows 2000 is explained below. Follow the same steps to scan with
other applications in other operating systems.
many TWAIN-compliant software applications.
The example of scanning with Imaging* in Windows 2000 is explained below. Follow the same steps to scan with
other applications in other operating systems.
* Imaging is an accessory in Windows.
[Place the original and switch the machine to PC
SCAN mode]
SCAN mode]
1
Place the original on the document glass
or in the reversing automatic document
feeder.
or in the reversing automatic document
feeder.
● For information on placing the original, see page 4-
6 of "Operation Manual (for general information
and copier operation)".
and copier operation)".
● Only one side of an original can be scanned using
the SHARP TWAIN driver.
● Some versions of Windows and some software
applications may not allow multiple originals to be
scanned.
scanned.
2
Touch the [PC SCAN] key in the touch
panel.
panel.
The display will change to PC SCAN mode and the
TWAIN driver can now be used.
TWAIN driver can now be used.
[Select the device]
3
Start Imaging and select "Select Device"
from the "File" menu.
from the "File" menu.
The "Select Device" window appears.
4
Select the TWAIN driver of the machine in
the "Select Device" window and click the
"OK" button.
the "Select Device" window and click the
"OK" button.
[Open the TWAIN driver]
5
Select "Acquire Image" from the "File"
menu.
menu.
The TWAIN driver settings window appears.
[Select scan settings]
6
Select scan settings for the TWAIN driver.
When finished, click the "Preview" button.
When finished, click the "Preview" button.
An image of the original will appear in the TWAIN
driver. If the image is not satisfactory, adjust the
settings and then check the preview screen again.
driver. If the image is not satisfactory, adjust the
settings and then check the preview screen again.
NOTE
When placing the original, make sure that it is
straight.
straight.
NOTE
When you switch to PC SCAN mode,
● Operation using the operation panel is disabled,
● Operation using the operation panel is disabled,
with the exception of pressing the [CA] key and [C]
key and touching the [EXIT] key in the touch panel.
key and touching the [EXIT] key in the touch panel.
● New print jobs will not be accepted.
NOTE
The procedure for selecting the device varies by
application. See the manual or Help for the
application you are using.
application. See the manual or Help for the
application you are using.
NOTE
If a window appears prompting you to set the IP
address, set the IP address and then click the "OK"
button to close the window. (See page 21.)
address, set the IP address and then click the "OK"
button to close the window. (See page 21.)
NOTE
For information on selecting scan settings and
specifying the scanning area, click the
specifying the scanning area, click the
button to
view Help.
!whaleII_inst_ex.book 22 ページ ２００４年９月１０日 金曜日 午前８時４８分
Click on the first or last page to see other AR-C262M (serv.man19) service manuals if exist.