Sharp SHARP POS SOFTWARE V4 (serv.man267) Driver / Update ▷ View online
438
Bill should print item real quantity (qtyr) rather than original quantity (qty0) [as on
receipt]; showed wrong when merging split transactions and consolidating. Now
fixed
receipt]; showed wrong when merging split transactions and consolidating. Now
fixed
437
Period2 wastage totals not being cleared. Now fixed
436
Screen mode switch /s5 for 1280x800. Now included
435
Sometimes a mixmatch MM wouldn't trip (if MM was edited from earlier versions)
- trip value was still being tested although inaccessible. Now fixed
- trip value was still being tested although inaccessible. Now fixed
434
Voiding or unvoiding an item stores the (un)voiders server number as the item's
server.
server.
433
Promos were not storing server no. in promo item. Now fixed
432
When splitting: source item line is greyed out when split (or quantity = 0 in
quantity mode)
quantity mode)
431
Without auto table release, transactions were not being released from their
current till at log off. Now fixed
current till at log off. Now fixed
430
When redirecting a KP any pending spool files are moved to the new kp.
429
Deposit amount is now stored within display item in the receipt window.
428
Loyalty Realtime - if request inaccessible, after error message there was a 2nd
blank message. Now fixed
blank message. Now fixed
Sharp POS V4.1.1199 VPM V2.1.0.349
17/10/13
427
427
Feature Added
Using the following S2001.ini setting HOTELVOUCHERS=2
The standard hotel interface will now print 2 Hotel vouchers
Using the following S2001.ini setting HOTELVOUCHERS=2
The standard hotel interface will now print 2 Hotel vouchers
426
Feature Added
Text 'Cash given in change' is now editable in VPM
– Configure - text schemes
425
Feature Added
Support for I-Button (dallas key) in VPM
– Till configuration – Physical
424
Feature Added
Loyalty data field on Screen and Receipt extended for max 8 lines of info with 80
characters. To revert to old style use S2001.ini setting LOY2013=0
Loyalty data field on Screen and Receipt extended for max 8 lines of info with 80
characters. To revert to old style use S2001.ini setting LOY2013=0
423
Feature Added
Using the S2001.ini setting LOYSHOWASPROMPT=1
The loyalty cardname will appear in the prompt panel near top of screen above
the large list area window.
Using the S2001.ini setting LOYSHOWASPROMPT=1
The loyalty cardname will appear in the prompt panel near top of screen above
the large list area window.
422
Feature Added
Using Sharpsoft Loyaltyx500v2 it is possible to print the loyalty points awarded
on the receipt.
Also a line for loyalty points 'spent' is printed (this is not normally used) and the
line will NOT be printed unless not zero. The S2001.ini setting RCTLOYPOINTS
has been updated to allow the following.
RCTLOYPOINTS=x
Using Sharpsoft Loyaltyx500v2 it is possible to print the loyalty points awarded
on the receipt.
Also a line for loyalty points 'spent' is printed (this is not normally used) and the
line will NOT be printed unless not zero. The S2001.ini setting RCTLOYPOINTS
has been updated to allow the following.
RCTLOYPOINTS=x
x is a number
Start with 0
Add 1000 if 'Loyalty points spent' is to be printed
Add 0100 if 'points before sale' is to be printed
Add 0010 if 'points after sale' is to be printed
Add 0001 if 'redemption value' is to be printed
Default is 1111 - all are printed
421
Feature Added
Changes for EFT per till. Means that both Sentinel and Bill manager can be used
on the same master/ slave system
on the same master/ slave system
420
Feature Added
Cashrsp V17
Analysis category info now on ($SDISC, $LDISC, $ITEM, $IDISC); promo no in
$IDISC
Cashrsp V17
Analysis category info now on ($SDISC, $LDISC, $ITEM, $IDISC); promo no in
$IDISC
419
Feature Added
Fixed file export via FTP - at EOD and real time PLU edit
Fixed file export via FTP - at EOD and real time PLU edit
418
Feature Added
Flat rate VAT in cash report
Use settings
VATFLATRATE=xxx
VATFLATEXCLUDE=V (optional)
(xxx is vat rate in %, V is VAT exempt tax band (optional), A-F)
Flat rate VAT in cash report
Use settings
VATFLATRATE=xxx
VATFLATEXCLUDE=V (optional)
(xxx is vat rate in %, V is VAT exempt tax band (optional), A-F)
417
Feature Added
It is possible to remove the transaction number from the Bill and receipt using the
following 2 settings. Use with caution as this also removes the transaction
number from the transaction history so locating a transaction can be difficult.
TRANNO_RCT=0
TRANNO_BILL=0
It is possible to remove the transaction number from the Bill and receipt using the
following 2 settings. Use with caution as this also removes the transaction
number from the transaction history so locating a transaction can be difficult.
TRANNO_RCT=0
TRANNO_BILL=0
416
Not all 8 loyalty info lines were being printed (where available). Now fixed
415
KP redirection didn't work on preorder KPs. Now fixed
414
Loyalty print on receipt was missing Carriage returns. Now fixed
413
Error
correct did not take of the last item if ‘Item condolidate’ was enabled. Now
fixed
412
Error correct didn't work after moving to a new list. Now fixed
411
On extremely rare occasions on a till without an MSR, the OPOS driver would
always report a read (after startup, endless looping waiting for authorization)
New setting
MSRNOTPRESENT=1
always report a read (after startup, endless looping waiting for authorization)
New setting
MSRNOTPRESENT=1
410
Slave terminals now sync their date and time with master at application startup
and entry to trading (as well as Open Session),
also does double check (Year >= 2013)
and entry to trading (as well as Open Session),
also does double check (Year >= 2013)
409
Linked parent PLUs: when refunded, tied PLUs were not being reported in
CASHRSP with -ve cost (and price)
Meant also that server totals and PLU totals were not adding totals correctly for
tied parent PLUs. Now fixed
CASHRSP with -ve cost (and price)
Meant also that server totals and PLU totals were not adding totals correctly for
tied parent PLUs. Now fixed
408
Slave startup following off-line mode, when tran status is indeterminate and the
user is prompoted, log the response
user is prompoted, log the response
407
Support for screen resolution 1920x1080 using /s4 switch
406
Loading old transaction using Cashrspbyhand did not load EFT transactions now
fixed.
fixed.
405
A MixMatch Offer with 'give bucket free' but only a single bucket in offer would go
into endless loop (must have 2nd bucket, as free bucket is not included in
condition.
into endless loop (must have 2nd bucket, as free bucket is not included in
condition.
404
When clearing all sales the billboard position was not saved. Now fixed
403
BR BlueRunner, allow tender with gift card i.e. not use whole value
402
Selling same items differing only in analysis shift, with item consolidation, were
being consolidated, losing the 2nd analysis category value. Now fixed
being consolidated, losing the 2nd analysis category value. Now fixed
401
T&A Time and Attendance Report (all servers) was adding a day to the end-date
on each server pass. Now fixed
on each server pass. Now fixed
400
New S2001.ini setting LISTSDISABLEPRIORITY=1
disables list priority processing.
disables list priority processing.
399
Interval drinks didn't work correctly - macros were having the '.' removed in some
Circumstances. Now fixed
Circumstances. Now fixed
398
With both settings
DEPTREPORT_NOQTY=1 and PROMOSINREPORT=2
quantities were still being printed for subtotals, totals and MM. now fixed
DEPTREPORT_NOQTY=1 and PROMOSINREPORT=2
quantities were still being printed for subtotals, totals and MM. now fixed
397
Close session dept report could print garbage after title and underline lines. Now
fixed
fixed
396
When opening a room already open with 0 balance, the prompt to close the room
was only given if a new transaction had not been started. It will now always give
the prompt.
was only given if a new transaction had not been started. It will now always give
the prompt.
395
With 86CLEARATSOD=1
Set stock; close session & EOD; modify the list of 86 PLU; SOD & open session;
trading
The previous stock value was visible in the centre of button.
After reloading the list, because all 86 info had been cleared, the 86 zone was
not being emptied.
If no reloading, the 86 info was available (previous=x, now=0) and caused the 86
zone to be cleared. Before reloading we now empty all 86 zones.
Set stock; close session & EOD; modify the list of 86 PLU; SOD & open session;
trading
The previous stock value was visible in the centre of button.
After reloading the list, because all 86 info had been cleared, the 86 zone was
not being emptied.
If no reloading, the 86 info was available (previous=x, now=0) and caused the 86
zone to be cleared. Before reloading we now empty all 86 zones.
394
Diagnostic logging to see if the SharpBO XML output is enabled
393
Transactions produced between builds 4.1.910 (19-7-12) and 4.1.1123 (10-6-13),
that had multiple
payments, were not loaded correctly by build 4.1.1124+
that had multiple
payments, were not loaded correctly by build 4.1.1124+
392
86 feature: Using clear at SOD, a new slave session after SOD didn't fetch new
86 updates from the master.
86 updates from the master.
391
Tran History wasn't deleting expired entries from database table. Now fixed
01/07/13
Sharp POS V4.1.1149 VPM V2.1.0.343
390
Feature Added
RCTBILL_DESCWITHFREETEXT=1
In conjunction with VPM product option "Description with Freetext", will print the
free text after the product text on bills and receipts
RCTBILL_DESCWITHFREETEXT=1
In conjunction with VPM product option "Description with Freetext", will print the
free text after the product text on bills and receipts
389
Feature Added
Reason entry compulsory can be made compulsory with setting
REASONS_NOCANCEL=n
where n is 1 for void, 2 for VIP, 4 for refund: add for combination, ie. 7 means all
Reason entry compulsory can be made compulsory with setting
REASONS_NOCANCEL=n
where n is 1 for void, 2 for VIP, 4 for refund: add for combination, ie. 7 means all
388
Feature Added
Product reports with separate price baands print band indicator.
Setting PRODREPORTZEROSKIP=1 will skip zero price bands (other than 1st,
1)
Product reports with separate price baands print band indicator.
Setting PRODREPORTZEROSKIP=1 will skip zero price bands (other than 1st,
1)
387
Feature Added
New setting
KPONREFUND=1
will cause refunds to print on KP
New setting
KPONREFUND=1
will cause refunds to print on KP
386
Feature Added
To supress the printing of any loyalty information on the receipt when a loyalty
card is used.
LOYNOPRINT=1
To supress the printing of any loyalty information on the receipt when a loyalty
card is used.
LOYNOPRINT=1
385
Feature Added
'Void After' reason enabled separately (but reported as void).
'Void After' reason enabled separately (but reported as void).
384
Feature Added
Manual loyalty card input - allow a prefix with setting
LOYMANPREFIX=nnnnnnnnn
Manual loyalty card input - allow a prefix with setting
LOYMANPREFIX=nnnnnnnnn
383
Feature Added
Reasons now produces and can export REASONS.CSV
Reasons now produces and can export REASONS.CSV
382
Feature Added
Multiple KP copies, Set in VPM till config/order printers
Multiple KP copies, Set in VPM till config/order printers
381
Feature Added
Settings to print KP table line in red, and zero-priced items in red:
KPnTABLERED=1
KPnZEROPRICERED=1
(n = KP number)
Settings to print KP table line in red, and zero-priced items in red:
KPnTABLERED=1
KPnZEROPRICERED=1
(n = KP number)
380
Feature Added
4-digit server numbers.
4-digit server numbers.
379
Feature Added
At EOD option to allow export of Customer table (in SQL format)
VPM System Config/Fixed file export
Customer Export added to Manager Menu (and references to CSV removed)
At EOD option to allow export of Customer table (in SQL format)
VPM System Config/Fixed file export
Customer Export added to Manager Menu (and references to CSV removed)
378
Feature Added
Graphic mode 3 for 1366x768
(use /s3 in S2008 shortcut command line)
Graphic mode 3 for 1366x768
(use /s3 in S2008 shortcut command line)
377
Feature Added
It is now possible to show voided items in the receipt window in red.
It is now possible to show voided items in the receipt window in red.
Click on the first or last page to see other SHARP POS SOFTWARE V4 (serv.man267) service manuals if exist.