Sharp CD-XP120H (serv.man9) Service Manual ▷ View online
CD-XP120H
– 8 –
REMOVING AND REINSTALLING THE MAIN PARTS
TAPE MECHANISM SECTION
Perform steps 1 to 6 and 9 of the disassembly method to
remove the tape mechanism.
remove the tape mechanism.
Figure 8-1
Figure 8-2
Figure 8-3
Figure 8-4
Figure 8-5
How to remove the record/playback and erase
heads (TAPE 1) (See Fig. 8-1)
heads (TAPE 1) (See Fig. 8-1)
1. When you remove the screws (A1) x 2 pcs., the record/
playback head can be removed.
2. Move the hooks (A2) x 2 pcs., toward the center position as
shown in Fig. 8-1 and then lift the erase head.
How to remove the playback head (TAPE 2)
(See Fig. 8-2)
(See Fig. 8-2)
1. When you remove the screws (B1) x 2 pcs., the playback
head can be removed.
How to remove the pinch roller (TAPE 1)
(See Fig. 8-3)
(See Fig. 8-3)
1. When you remove the screw (C1) x 1 pc., the pinch roller
can be removed.
Note:
When installing the pinch roller, pay attention to the spring
mounting position.
When installing the pinch roller, pay attention to the spring
mounting position.
How to remove the pinch roller (TAPE 2)
(See Fig. 8-3)
(See Fig. 8-3)
1. When you remove the screw (D1) x 1 pc., the pinch roller
can be removed.
Note:
When installing the pinch roller, pay attention to the spring
mounting position.
When installing the pinch roller, pay attention to the spring
mounting position.
How to remove the tape motor (See Fig. 8-4)
1. Remove the belt.
2. Remove the screws (E1) x 6 pcs., to remove the motor
2. Remove the screws (E1) x 6 pcs., to remove the motor
bracket.
3. Remove the screws (E2) x 3 pcs., to remove the tape motor.
How to remove the belt (TAPE 1)
(See Fig. 8-5)
(See Fig. 8-5)
1. Remove the main belt (F1) x 1 pc., from the tape motor side.
2. Remove the FF/REW belt (F2) x 1 pc.
2. Remove the FF/REW belt (F2) x 1 pc.
How to remove the belt (TAPE 2)
(See Fig. 8-5)
(See Fig. 8-5)
1. Remove the main belt (G1) x 1 pc., from the tape motor side.
2. Remove the FF/REW belt (G2) x 1 pc.
2. Remove the FF/REW belt (G2) x 1 pc.
Record/Playback
Head
Head
Erase
Head
Head
(A1)x1
ø2x3mm
ø2x3mm
(A1)x1
ø2x7mm
ø2x7mm
Hook
(A2)x2
(A2)x2
TAPE 1
TAPE 2
(B1)x1
ø2x6mm
ø2x6mm
(B1)x1
ø2x6mm
ø2x6mm
Playback
Head
Head
Tape
Motor
Motor
(E2)x3
Special Screw
Special Screw
Motor
Bracket
Bracket
(E1)x2
ø2x4mm
ø2x4mm
(E1)x2
ø2x4mm
ø2x4mm
(E1)x2
ø2x4mm
ø2x4mm
Tape
Motor
Motor
Motor
Bracket
Bracket
TAPE 2
Pinch Roller
TAPE 1
Pinch Roller
(C1)x1
ø2x4mm
ø2x4mm
(D1)x1
ø2x4mm
ø2x4mm
TAPE 2
TAPE 1
TAPE 2
Main Belt
(G1)x1
Main Belt
(G1)x1
TAPE 1
Main Belt
(F1)x1
Main Belt
(F1)x1
Tape
Motor
Motor
Tape
Motor
Motor
REW/FF
Clutch Ass'y
Clutch Ass'y
REW/FF
Clutch Ass'y
Clutch Ass'y
Main
Belt
(F1)x1
Belt
(F1)x1
Main
Belt
(G1)x1
Belt
(G1)x1
REW/FF
Belt
(G2)x1
Belt
(G2)x1
REW/FF
Belt
(F2)x1
Belt
(F2)x1
– 9 –
CD-XP120H
How to remove the pickup (See Fig. 9-3)
1. Remove the stop washer (C1) x 1 pc., to remove the gear
(C2) x 1 pc.
2. Remove the screws (C3) x 2 pcs., to remove the shaft
(C4) x 1 pc.
3. Remove the pickup.
Note
After removing the connector for the optical pickup from the
connector wrap the conductive aluminium foil around the front
end of connector so as to protect the optical pickup from
electrostatic damage.
After removing the connector for the optical pickup from the
connector wrap the conductive aluminium foil around the front
end of connector so as to protect the optical pickup from
electrostatic damage.
Figure 9-2
CD MECHANISM SECTION
Perform steps 1, 2, 3, 11, 12, 13 and 15 of the disassembly
method to remove the CD mechanism.
method to remove the CD mechanism.
How to remove the loading motor
(See Figs. 9-1, 9-2)
(See Figs. 9-1, 9-2)
1. Remove the screws (B1) x 5 pcs.
2. Remove the belt (B2) x 1 pc.
3. Remove the screws (B3) x 2 pcs., to remove the loading
2. Remove the belt (B2) x 1 pc.
3. Remove the screws (B3) x 2 pcs., to remove the loading
motor.
Figure 9-1
(B1)x2
ø3x8mm
ø3x8mm
(A1)x4
ø3x8mm
ø3x8mm
(B1)x3
ø3x8mm
ø3x8mm
Loading
Tray
Tray
(B3)x2
ø2.4x3mm
ø2.4x3mm
(B2)x1
(A2)x1
Loading
Motor
Motor
T/T Up/Down
Motor
Motor
(A3)x2
ø2.4x3mm
ø2.4x3mm
Figure 9-3
How to remove the T/T up/down motor
(See Figs. 9-1, 9-2)
(See Figs. 9-1, 9-2)
1. Remove the screws (A1) x 4 pcs.
2. Remove the belt (A2) x 1 pc.
3. Remove the screws (A3) x 2 pcs., to remove the T/T up/
2. Remove the belt (A2) x 1 pc.
3. Remove the screws (A3) x 2 pcs., to remove the T/T up/
down motor.
(C3)x1
ø2.6x6mm
ø2.6x6mm
CD
Mechanism
Mechanism
Stop Washer
(C1)x1
(C1)x1
Gear
(C2)x1
(C2)x1
Shaft
(C4)x1
(C4)x1
Pickup
(C3)x1
ø2.6x6mm
ø2.6x6mm
Display