Panasonic TX-L32EM6B / TX-L32EM6E / TX-L32EM6Y / TX-LR32EM6 Service Manual ▷ View online
5
2.2. About lead free solder (PbF)
Note: Lead is listed as (Pb) in the periodic table of elements.
In the information below, Pb will refer to Lead solder, and PbF will refer to Lead Free Solder.
The Lead Free Solder used in our manufacturing process and discussed below is (Sn+Ag+Cu).
That is Tin (Sn), Silver (Ag) and Copper (Cu) although other types are available.
In the information below, Pb will refer to Lead solder, and PbF will refer to Lead Free Solder.
The Lead Free Solder used in our manufacturing process and discussed below is (Sn+Ag+Cu).
That is Tin (Sn), Silver (Ag) and Copper (Cu) although other types are available.
This model uses Pb Free solder in it’s manufacture due to environmental conservation issues. For service and repair
work, we’d suggest the use of Pb free solder as well, although Pb solder may be used.
work, we’d suggest the use of Pb free solder as well, although Pb solder may be used.
PCBs manufactured using lead free solder will have the PbF within a leaf Symbol PbF stamped on the back of PCB.
Caution
Caution
• Pb free solder has a higher melting point than standard solder. Typically the melting point is 50 ~ 70 °F
(30~40 °C) higher. Please use a high temperature soldering iron and set it to 700 ± 20 °F (370 ± 10 °C).
• Pb free solder will tend to splash when heated too high (about 1100 °F or 600 °C).
If you must use Pb solder, please completely remove all of the Pb free solder on the pins or solder area before
applying Pb solder.If this is not practical, be sure to heat the Pb free solder until it melts, before applying Pb solder.
applying Pb solder.If this is not practical, be sure to heat the Pb free solder until it melts, before applying Pb solder.
• After applying PbF solder to double layered boards, please check the component side for excess solder which
may flow onto the opposite side. (see figure below)
Suggested Pb free solder
There are several kinds of Pb free solder available for purchase. This product uses Sn+Ag+Cu (tin, silver, copper)
solder. However, Sn+Cu (tin, copper), Sn+Zn+Bi (tin, zinc, bismuth) solder can also be used.
There are several kinds of Pb free solder available for purchase. This product uses Sn+Ag+Cu (tin, silver, copper)
solder. However, Sn+Cu (tin, copper), Sn+Zn+Bi (tin, zinc, bismuth) solder can also be used.
6
3 Service Navigation
3.1 Service Hint
Board Name
Function
Remarks
Main Board
Speaker out, AV Terminal, HDMI in, SD Card, PC
in, Digital Signal Processor, Nile-Tcon, Tuner
in, Digital Signal Processor, Nile-Tcon, Tuner
All boards are non
serviceable and
should be exchanged
for service
serviceable and
should be exchanged
for service
IR Board
Remote Receiver, LED
Power Board
Power (AC/DC), DC-DC
Key Board
Control Button, Power switch
Main Board
Power Board
Key Board
IR Board
7
3.2. Applicable signals
COMPONENT (Y, PB, PR), HDMI
Mark: Applicable input signal
PC (from D-sub terminal/ HDMI terminal)
Applicable input signal for PC is basically compatible to VESA standard timing
Applicable input signal for PC is basically compatible to HDMI standard timing
Note:
• Signals other than above may not be displayed properly.
• The above signals are reformatted for optimal viewing on your display.
• PC signal is magnified or compressed for display, so that it may not be possible to show fine detail with sufficient
• Signals other than above may not be displayed properly.
• The above signals are reformatted for optimal viewing on your display.
• PC signal is magnified or compressed for display, so that it may not be possible to show fine detail with sufficient
clarity.
8
4 Specifications
Model No.
TX-L32EM6B
6B
Power source
AC 220-240 V, 50/60 Hz
Energy efficiency class
A+
On mode average power consumption 30w
Annual energy consumption*1
Annual energy consumption*1
42KWH
Rated power consumption
66W
Standby power consumption*2
0.3W
Dimensions (W × H × D)
With Pedestal:
738 mm × 512 mm × 206 mm
Without Pedestal (TV only):
738 mm × 454 mm × 66 mm
738 mm × 512 mm × 206 mm
Without Pedestal (TV only):
738 mm × 454 mm × 66 mm
Mass
With Pedestal:
8.5 kg
Without Pedestal (TV only):
7.5 kg
8.5 kg
Without Pedestal (TV only):
7.5 kg
Displa
y panel
Aspect ratio
16:9
Visible screen size
80 cm (diagonal)
Number of pixels
2,073,600 (1,920 (W) × 1,080 (H))
Sound
Speaker
(132 mm × 34 mm × 34.5 mm) × 2, 16 Ω
Audio output
10 W (5 W + 5 W), 10% THD
Headphones
3.5mm stereo mini Jack × 1
Broadcast System
Analogue: PAL-I
Digital: DVB-T/T2
Digital: DVB-T/T2
Antenna input
VHF / UHF
Operating conditions
Temperature : 0 °C - 35 °C
Humidity : 20 % - 80 % RH (non-condensing)
Humidity : 20 % - 80 % RH (non-condensing)
Click on the first or last page to see other TX-L32EM6B / TX-L32EM6E / TX-L32EM6Y / TX-LR32EM6 service manuals if exist.