Panasonic SA-AK330EE (serv.man4) Service Manual ▷ View online
n AMPLIFIER SECTION
RMS output power
THD 10%, both channels driven
1 kHz,
(Low channel)
90 W per channel (5
Ω)
10 kHz,
(High channel)
90 W per channel (5
Ω)
Total Bi-Amp power
360 W
n FM/AM TUNER, TERMINALS SECTION
Preset station
FM 15 stations
AM 15 stations
Frequency Modulation (FM)
Frequency range
87.50 - 108.00 MHz (50 kHz steps)
Sensitivity
1.8 µV (IHF)
S/N 26 dB
1.5 µV
Antenna terminal(s)
75
Ω (unbalanced)
Amplitude Modulation (AM)
Frequency range
522 - 1629 kHz (9 kHz steps)
Sensitivity
S/N 20 dB (at 999 kHz)
560 µV/m
Audio performance (Amplifier)
Input sensitivity/Input impedance
Aux
250 mV,14.7 k
Ω
Phone jack
Terminal
Stereo, 3.5 mm jack
n CASSETTE DECK SECTION
2004 Co. .
SA-AK330EE
Colour
(K)... Black Type
(S)... Silver Type
(K)... Black Type
(S)... Silver Type
Track system
4 track, 2 channel
Heads
Record/playback
Solid permoy head
Erasure
Double gap ferrite head
Motor
DC servo motor
Recording system
AC bias 100 kHz
Erasing system
AC erase 100 kHz
Tape speed
4.8 cm/s
Over frequency response (+3 dB, -6 dB at DECK OUT)
NORMAL
35 Hz - 14 kHz
S/N
50 dB (A weighted)
Wow and flutter
0.18 % (WRMS)
Fast forward and rewind time
Approx. 120 seconds with
C-60 cassette tape
n DISC SECTION
Discs played [8 cm or 12 cm]
(1) CD-Audio (CD-DA)
(2) CD-R/RW (CD-DA, MP3 formatted discs)
(3) MP3
Bit rate
MP3
32 kbps - 320 kbps
Sampling frequency
MP3
32 kHz, 44.1 kHz, 48 kHz
CD
44.1 kHz
Decoding
16 bit linear
Digital filter
8 fs
CD Stereo System
Specifications
ORDER NO. MD0412591C3
D/A converter
MASH (1 bit DAC)
Pickup
Wavelength
780 nm
Beam Source
Semiconductor laser
Audio output (Disc)
Number of channels
2 (Stereo) (FL,FR)
n GENERAL
Power Supply
AC 230 V, 50Hz
Power consumption
238 W
Power consumption
in standby
mode
0.7 W
Dimensions (W x H x D)
250 x 330 x 341 mm
1 Before Repair and Adjustment
4
2 Protection Circuitry
4
3 Prevention of Electro Static Discharge (ESD) to
Electrostatically Sensitive (ES) Devices
5
4 Handling the Lead-free Solder
5
4.1.
About lead free solder (PbF)
5
5 Handling Precautions For Traverse Deck
6
6 Precaution of Laser Diode
7
7 Accessories
8
8 Operation Procedures
9
9 Disassembly and Assembly of Main Component
11
9.1.
Disassembly flow chart
11
9.2.
Gear for servicing (jig) Information
12
9.3.
Disassembly of Top Cabinet
13
9.4.
Disassembly of CD Lid
13
9.5.
Disassembly of Rear Panel
15
9.6.
Disassembly of CD Mechanism Unit
15
9.7.
Disassembly of Main P.C.B.
16
9.8.
Disassembly of Power P.C.B.
16
9.9.
Disassembly of Transformer P.C.B.
17
9.10. Disassembly of Front Panel Unit
18
9.11. Disassembly of Deck Mechanism Unit
18
9.12. CD Mechanism Main Component Replacement
Procedures
19
9.13. Replacement for the pinch roller ass 馳 and head block 33
9.14. Replacement for the Deck motor ass 馳, capstan belt A,
capstan belt B and winding belt
34
9.15. Replacement for the cassette lid ass 馳
37
9.16. Rectification for tape jam problem
38
10 Checking for major P.C.Bs
39
10.1. Checking of Main P.C.B.
39
10.2. Checking of Transformer P.C.B.
40
Mass
7.1 kg
Operating temperature range
+5 to +35°C
Operating humidity range
5 to 90% RH (no condensation)
n SYSTEM
SC-AK330 (EE-S)
Music center: SA-AK330 (EE-S)
Speaker: SB-AK330 (GC-S)
SC-AK330 (EE-K)
Music center: SA-AK330 (EE-K)
Speaker: SB-AK330 (EG-K)
Notes:
1.
Specifications are subject to change without notice. Mass and
dimensions are approximate.
dimensions are approximate.
2.
Total harmonic distortion is measured by the digital spectrum
analyzer.
analyzer.
10.3. Checking of Panel, Deck & Deck Mechanism P.C.B.
41
10.4. Checking of Power P.C.B.
42
11 Self-Diagnostic Function
43
11.1. Self-diagnostic display
43
11.2. How to enter the Self-Diagnostic Function
43
11.3. Cassette Mechanism Test (For error code H01, H02, H03,
F01)
43
11.4. CD Mechanism Test (F15, F26, F16, F17, F27, F28, F29,
F30, H15 & H16)
43
11.5. To clear all Error code
44
11.6. To exit from Self-Diagnostic function
44
11.7. Power Amplifier Failure (F61)
44
11.8. Description of Error Code
44
12 CD Test Mode Function
46
12.1. How to set CD test mode
46
12.2. CD Automatically Adjustment result indication
46
12.3. CD Mecha Aging Test Mode (CR20)
46
12.4. Micon ROM Checksum and Version Display Mode
47
13 Measurements and Adjustments
48
13.1. Cassette Deck Section
48
13.2. Tuner Section
48
13.3. Alignment Points
49
14 Block Diagram
50
15 Voltage Measurement
57
16 Schematic Diagram
59
16.1. (A) CD Servo Circuit
60
16.2. (B) Main (Tuner) Circuit
62
16.3. (B) Main Circuit
63
16.4. (C) Panel Circuit
68
16.5. (D) Transformer Circuit, (E) CD Detect Circuit, (F) Spindle
Position Circuit & (G) CD Loading Circuit
70
16.6. (H) Power Circuit
71
CONTENTS
Page
Page
2
SA-AK330EE
16.7. (I) Deck Circuit & (J) Deck Mechanism Circuit
72
17 Printed Circuit Board
74
17.1. (A) CD Servo P.C.B.
74
17.2. (B) Main P.C.B.
75
17.3. (C) Panel P.C.B.
77
17.4. (D) Transformer P.C.B.
79
17.5. (E) CD Detect P.C.B., (F) Spindle Position P.C.B., (G) CD
Loading P.C.B.
80
17.6. (H) Power P.C.B.
81
17.7. (I) Deck P.C.B. & (J) Deck Mechanism P.C.B.
83
18 Wiring Connection Diagram
84
19 Illustration of IC 痴, Transistors and Diodes
85
20 Terminal Function of IC 痴
86
20.1. IC7002 (MN6627953HB) Servo processor/ Digital signal
processor/ Digital filter/ D/A converter
86
20.2. IC7003 (AN8739SBTE2) Focus coil/ Tracking coil/
Traverse motor/ Spindle motor drive
86
20.3. IC2801 (C2CBJG000564) System Microprocessor
87
21 Troubleshooting Guide
89
22 Parts Location and Replacement Parts List
90
22.1. Deck Mechanism (RAA4502-S)
91
22.2. CD Loading Mechanism (RD-DAC026-S)
94
22.3. Cabinet
97
22.4. Electrical Parts List
99
22.5. Packing Materials & Accessories Parts List
107
22.6. Packaging
108
3
SA-AK330EE
1 Before Repair and Adjustment
Disconnect AC power, discharge Power Supply Capacitors C5820 and C5840 through a 10
Ω, 5W resistor to ground.
DO NOT SHORT-CIRCUIT DIRECTLY (with a screwdriver blade, for instance), as this may destroy solid state devices.
After repairs are completed, restore power gradually using a variac, to avoid overcurrent.
After repairs are completed, restore power gradually using a variac, to avoid overcurrent.
Current consumption at AC 230V, 50 Hz in NO SIGNAL mode (volume min at CD mode) should be ~ 350mA.
2 Protection Circuitry
The protection circuitry may have operated if either of the following conditions are noticed:
· No sound is heard when the power is turned on.
· Sound stops during a performance.
The function of this circuitry is to prevent circuitry damage if, for example, the positive and negative speaker connection wires are
“shorted”, or if speaker systems with an impedance less than the indicated rated impedance of the amplifier are used.
If this occurs, follow the procedure outlines below:
1. Turn off the power.
2. Determine the cause of the problem and correct it.
3. Turn on the power once again after one minute.
Note :
When the protection circuitry functions, the unit will not operate unless the power is first turned off and then on again.
· No sound is heard when the power is turned on.
· Sound stops during a performance.
The function of this circuitry is to prevent circuitry damage if, for example, the positive and negative speaker connection wires are
“shorted”, or if speaker systems with an impedance less than the indicated rated impedance of the amplifier are used.
If this occurs, follow the procedure outlines below:
1. Turn off the power.
2. Determine the cause of the problem and correct it.
3. Turn on the power once again after one minute.
Note :
When the protection circuitry functions, the unit will not operate unless the power is first turned off and then on again.
4
SA-AK330EE